更新日： 集計期間:Jul 16, 2025～Aug 12, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Jul 16, 2025～Aug 12, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Jul 16, 2025～Aug 12, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
121～135 件を表示 ／ 全 308 件
![Digital Electromagnetic Field Strength Tester 'EMF-823' [Rental]](https://image.www.ipros.com/public/product/image/bd8/2000485965/IPROS20294579665668766607.jpeg?w=280&h=280)
A simple design electromagnetic field strength tester with easy operation. It supports three ranges, up to 2000μT, and can measure electromagnetic waves from household appliances.
Measurement range: 0 to 20T / 200T / 2000μT
![Tech Tester "AT-10D2" [Rental]](https://image.www.ipros.com/public/product/image/611/2000485973/IPROS57432131377535706941.jpeg?w=280&h=280)
Do not break the anchor. Do not destroy the concrete. Testing under tensile load conditions suitable for the purpose is possible.
■ The large LCD screen has improved visibility. ■ Data storage is possible with the internal memory function. ■ The backlight function makes it easy to see even in dark places like tunnels and underground. ■ Measurements can be easily taken from ceiling or wall anchors. ■ It can also accommodate neji-me anchors. ■ Using the included tools, measurements of up to 100kN can be taken.
![Tech Tester "AT-10" [Rental]](https://image.www.ipros.com/public/product/image/01c/2000485985/IPROS24697036811278030238.jpeg?w=280&h=280)
Do not break the anchor. Do not destroy the concrete. Testing under tensile load conditions suitable for the purpose is possible.
■ It can be easily measured with anchors on ceilings and walls. ■ It can also accommodate the neji-me anchor. ■ Using the included tools, measurements of up to 100kN (10.2tf) can be taken. ■ The following measurements can be made. Since the load and displacement are always displayed in 2 channels, you can continuously monitor the load and displacement until the confirmation load during the test. - Load can be switched between kN and tf - Displacement unit is mm - Maximum load can be switched to kN or tf - Displacement at maximum load is in mm
![Concrete Tester "CTS-02" [Rental]](https://image.www.ipros.com/public/product/image/04d/2000486131/IPROS68073074819680343379.jpeg?w=280&h=280)
It is a non-destructive device for estimating the compressive strength of concrete.
By measuring and analyzing the time waveform of the impact force when striking concrete with a hammer, it has become possible to estimate the compressive strength of concrete simply and with high precision. Additionally, not only the compressive strength of concrete can be assessed, but it is also possible to detect the degree of surface deterioration of the concrete and the presence of delamination or peeling near the surface as supplementary information. 【Features】 ■ Capable of measuring the strength of high-strength concrete. ■ The measuring device operates on six AA batteries. ■ There are two measurement modes: Area mode for conducting health diagnostics and Point mode for estimating compressive strength at specific points.
![Techno Tester "RT-1000LD" [Rental]](https://image.www.ipros.com/public/product/image/cd5/2000486208/IPROS25625823204418514907.jpeg?w=280&h=280)
It will be a simple tensile testing device for adhesion and bonding strength.
Load and displacement can be measured simultaneously. By inputting the area of the attachment used, the load value per unit area can be displayed. 【Features】 ■ Simultaneous measurement of load and displacement with digital display ■ Compact and lightweight design allows for easy testing in narrow spaces and difficult conditions.
![Tech Tester "AT-30" [Rental]](https://image.www.ipros.com/public/product/image/431/2000486209/IPROS24326490215576717585.jpeg?w=280&h=280)
This is a testing machine that applies tensile loads to verify whether the installed anchor bolts meet the required performance standards.
It can simultaneously measure load and displacement, with a maximum load of "300kN." 【Features】 ■ Easy-to-read digital display on a large LCD screen ■ Unit switching possible with one touch (kN ⇔ tf switching available) ■ Can simultaneously view the tensile load and displacement of anchor bolts
![Techno Tester "RT-2000LD" [Rental]](https://image.www.ipros.com/public/product/image/5d8/2000486212/IPROS28822718366943195450.jpeg?w=280&h=280)
You can check the tensile load of exterior tiles and other materials using the filler attachment.
The load unit can be easily switched between "kgt" and "kN" with a single button, and it can measure up to a maximum load of "20.00kN (2040kgf)." 【Features】 ■ Safe and Convenient Its compact and lightweight design allows for reliable measurements in narrow spaces or difficult locations by a single person. ■ Unit switching can be done with one button. ■ Auto Power Off Function This function automatically turns off the display approximately 20 minutes after button operation to prevent battery drain. If the display turns off due to auto power off, you can restore it by turning the power switch to "off" and then back to "on." (When recovering from auto power off, the maximum value will be cleared.)
![Point Load Testing Machine [Rental]](https://image.www.ipros.com/public/product/image/97d/2000486307/IPROS58160142705404533890.jpeg?w=280&h=280)
The uniaxial compressive strength of the collected rock can be easily estimated.
The uniaxial compressive strength of the collected rock can be estimated on-site. The Bourdon tube manometer is equipped with two gauges, one for 5 MPa and another for 70 MPa, allowing for high-resolution readings at both low and high loads.
Quickly and reliably check for air leaks in products! Inspection can be done without a power supply.
The LS3010 is a testing machine that can confirm the presence or absence of air leaks due to seal defects or pinholes in small pouch packaging filled with powders or granules while containing gas inside. There are various methods for leak testing, but this product adopts a visual inspection method using submersion that can be performed immediately after purchase by the customer, featuring easy operation and space-saving design. 【Features】 - Can confirm the presence or absence of air leaks in small pouch packaging - Adopts a visual inspection method using submersion that can be performed immediately after purchase - Easy to operate - Space-saving *For more details, please refer to the PDF document or feel free to contact us.
Testing the tendency of segregation in fluidized powders!
The tendency of segregation of fluidized powder particles due to air flow can be tested with a sample size of approximately 10 mL. In a fluidized bed, fine particles tend to remain at the top for a long time due to the air they contain, while larger, denser coarse particles tend to gather at the bottom, leading to segregation. After mixing with a mixer, during filling and discharge, or when transporting by air, the likelihood of segregation due to fluidization increases.
Testing the tendency of segregation due to the screening effect of powder particles!
The tendency of segregation due to sifting can be tested with a sample size of approximately 50 mL. Segregation due to sifting refers to the most common segregation phenomenon where smaller particles pass through the gaps between larger particles. This mechanism is most likely to occur when a bulk material is composed of particles of different sizes and there is movement between the particles, such as during processes like filling or transfer.
It is a floor-standing movable calorimeter for safely testing the thermal, electrical, and mechanical stress of large battery cells and small modules.
The evaluation of these tests facilitates the assessment of the safety performance of battery cells, enables the definition of the safe operating limits of batteries, and makes it easier to research and develop the mechanisms of thermal runaway and thermal propagation. Options for capturing footage of battery explosions, nail penetration tests, temperature mapping of samples, and gas release sampling are available. This is a large-scale device capable of testing batteries for EV/HEV and aircraft. It is equipped with a container to hold fragments and smoke during sample explosions, an automatic safety valve, and an emergency cooling safety mechanism that automatically stops. Safety Testing Defines safe operating limits. To avoid the risks of thermal runaway and the potentially catastrophic consequences it may bring, it is essential to identify the safe operating limits of battery cells, modules, and packs. Therefore, batteries must be subjected to mechanical, electrical, and thermal stress to define safe operating limits. Thermal stability data from thermal stress tests helps define the safe operating temperature of the battery. Evaluating overcharging and discharge rates allows for the determination of maximum safe voltage and maximum safe current. The effects of mechanical stress and external short circuits (ESC) can be assessed.
This is a bench-scale calorimeter for stress testing small batteries. It also supports a small amount of ARC-type test cells.
The BTC-130 (Battery Test Adiabatic Calorimeter) is a bench-scale adiabatic calorimeter designed to test thermal, electrical, and mechanical stress on small battery cells. The evaluation of these tests facilitates the assessment of the safety performance of battery cells, the safe operating limits of batteries, and the research and development of thermal runaway mechanisms. The BTC-130 also supports the use of small quantities of ARC-type test cells, enabling thermal stability screening of individual battery components under adiabatic conditions.
It is a calorimeter for evaluating the characteristics of battery cells under normal and long-term usage conditions. It is compatible with adapters that accommodate various cell shapes.
The iso-BTC (Battery Testing Calorimeter) is an isothermal calorimeter designed for the characterization of the thermal behavior and electrical performance of battery cells under normal and long-term usage conditions. It supports a variety of adapters that enable the analysis of diverse cell shapes. The iso-BTC can fully integrate a charge-discharge unit, allowing for the repeated automatic cycling of battery cells under various operating conditions while simultaneously recording both the electrical performance of the battery and the heat generated. It also enables accelerated degradation testing, allowing for the investigation of the effects of battery degradation on cell performance. The chemical properties of the battery, the composition of the electrodes, and the type of battery cell can also be investigated in cell development using the iso-BTC. Through thermal mapping (multi-point temperature measurement), users can identify areas of the battery that generate larger amounts of thermal energy, which are highlighted. In addition to characterizing the thermal behavior of battery cells at various temperatures and (discharge) charge rates, this information can be used to develop effective and targeted thermal management strategies within battery modules and packs.
Wide range and high-precision temperature control device! Supports combinations of non-standard test conditions.
The "FT-01" is a fogging tester designed for evaluating the fogging characteristics of volatile components in decorative materials used in automobiles and aircraft. It can also be used for testing the fogging phenomenon of high-intensity discharge (HID) headlights in vehicles. The six test stations can conduct sample tests or blank tests simultaneously. 【Features】 - Guarantees accurate and reliable test data through stable operating conditions - Supports multi-method testing to meet various testing requirements - Microcomputer control with LED digital display and PVC operation panel - Quickly and intuitively displays test data and results - Designed for evaluating the fogging characteristics of volatile components in decorative materials used in automobiles and aircraft *For more details, please refer to the PDF materials or feel free to contact us.
