Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
271～300 item / All 394 items
You can easily conduct a pull-out strength verification test.
The DPG100 allows for easy installation and operation of pull-out tests. It is a compact testing machine that provides great peace of mind for anchor installers, design offices, construction workers, and clients, enabling simple testing. It can measure up to 100 kN.
It is a low-frequency magnetic field strength measuring instrument compliant with EN62233 and IEC62233.
It is a low-frequency magnetic field strength measuring device with a range of 1Hz to 400kHz. Waveform analysis can be performed using an oscilloscope through the output from the external output terminal. Exposure evaluation can be conducted for all types of waveforms.
Maximum load 100KN. Data accumulation is possible with internal memory function.
Connect the computer with the dedicated graph display software installed. Tensile tests can be conducted while checking the displacement-load curve on-site. Furthermore, the graph data can be saved on the computer.
Connectable to a computer via USB! Functions as a USB device! Measurement of concrete compressive strength Non-destructive testing equipment for concrete structures.
CTS-02V4 is a non-destructive testing device for assessing the integrity of concrete structures by measuring the compressive strength of concrete. It strikes the concrete with a hammer and measures the mechanical impedance from the impact force waveform to estimate the compressive strength of the concrete. The accuracy of strength estimation for concrete structures has been further improved. It can record up to 500,000 measurement data points!
Medium diameter (φ55mm) type based on AC/DC voltage measurement!
The CL-250 clamp tester for measuring AC and DC current is a medium diameter (φ55mm) type based on AC/DC voltage measurement, equipped with continuity check, maximum value memory function, and recorder output. It allows you to measure current simply by clamping the wiring while it is energized, without having to turn off the power or disconnect the wiring. For more details, please contact us.
Tensile load testing machine to confirm the adhesion strength of exterior wall tiles and the substrate of the rooftop waterproofing layer.
The Techno Tester R-10000ND/R-20000ND is a tensile load testing machine designed to verify the adhesion strength of exterior wall tiles and waterproofing layers on roofs. The maximum tensile load for the R-10000ND is 10kN, while the maximum tensile load for the R-20000ND is 20kN. The basic operating procedures are indicated in numerical order on the control panel, making it easy for anyone to use immediately. For more details, please contact us.
Cylindrical rotational viscometer. It can easily measure the viscosity of liquids.
VT-06 can manage the quality control of industrial products such as heavy oil, paint, and adhesives, as well as the manufacturing processes of food. It can easily measure viscosity across a wide range, including gear oil used in construction machinery. The measurement is done by immersing a rotor in the liquid and rotating it, allowing us to determine the viscosity of the liquid by measuring the viscous resistance (torque) acting on the rotor. For more details, please contact us.
Safe with JIS standard compliance! Ground resistance meter capable of measuring a wide range from Type A to Type D grounding work.
The "Earth Hi Tester 3151" is a ground resistance meter that can handle a wide range of sites from Type A to Type D grounding work. It complies with JIS standards, ensuring high safety, and employs an alternating potential difference measurement method that is not affected by external electrical equipment, allowing for accurate measurements. Additionally, the switch and dial components are designed to be resistant to dirt, enabling measurements even in harsh conditions. ★ For more details, please check the product page from the link below 【Related Links】. ★ You can also obtain the comprehensive catalog (electronic) from the "PDF Download" materials. ★ You can request a quote from the "Contact Us" section. Feel free to reach out.
Measure concrete strength using air pressure!
The air pressure pin penetration testing machine is a device that drives a specialized pin into concrete using air pressure and measures the penetration depth to estimate the concrete strength. It is a simple testing method that replaces the pull-out testing machine used for initial strength testing of sprayed concrete, does not require test specimens, and allows for testing the concrete sprayed onto wall surfaces in situ. 【Features】 ○ Measures concrete strength using air pressure ○ Japan Highway Public Corporation Standard JHS726-2001 For more details, please contact us or download the catalog.
Ideal for selecting masks and verifying/instructing proper mask wearing!
The mask fitting tester is a portable type of tester that quantitatively checks the fit of dust masks on the face in various work environments and medical settings within one minute. It is effective for preventing dust exposure in occupational health settings and for air and droplet infection control in medical environments. With a single detector (particle counter), it automatically switches between measuring the particle count inside the mask and outside (in the room) for continuous measurement. This reduces errors caused by differences in the characteristics of the detectors. 【Features】 - Measures the fit of dust masks on the face - Can measure without modifying the mask - Capable of measuring N95 respirators (N95 masks) - Includes a heating tube to prevent condensation of water vapor in exhaled breath, which can lead to droplet formation - Equipped with RS-232C output function for measurement data For more details, please contact us.
Measuring the time waveform of reaction force! Bolt tester for assessing the integrity of anchor bolts and similar components.
The "Bolt Tester CTS-03" is a device that measures the time waveform of the reaction force when striking bolts and nuts with a hammer that has a built-in impact accelerometer. In the case of bolts and nuts, it determines whether the response is elastic behavior or plastic behavior. It is ideal for testing the integrity of anchor bolts, truck wheel bolts, bolts on steel bridges, and mechanical anchor bolts, as well as inspecting the tightening degree of nuts. 【Features】 ■ Measures the time waveform of the reaction force ■ Hammer with a built-in impact accelerometer ■ A wide variety of attachments and applications ■ Suitable for multi-purpose measurement tasks *For more details, please feel free to contact us.
Is that HEPA leaking? Let's check it with Doctor-HEPA!
Is that HEPA leaking? Let's check it with Doctor-HEPA!
This is a DuPont impact testing machine that automates the weight lifting operation and reduces the burden on the operator.
● It automatically lifts the falling weight, contributing to the efficiency and safety of the measurement work. ● The drop height can be digitally set in 1mm increments.
This is a testing machine (dart impact tester) for evaluating the impact strength of plastic films and sheets using the free fall dart method.
It is an impact testing machine (dart impact tester) that evaluates the energy when a dart-shaped weight strikes and breaks a film-like sample.
It is a testing machine for evaluating the puncture impact strength of plastic films and similar materials under temperature conditions.
It is possible to conduct puncture impact strength tests on plastic films and other materials in environments ranging from -35℃ to 100℃.
This is a wet abrasion testing device (cleaning test device) that complies with JIS standards.
It reproduces the condition during cleaning with a brush and evaluates the extent of damage to surfaces such as coatings.
This is a testing machine for identifying the blow point of rubber materials. By understanding the minimum required vulcanization time for rubber, it contributes to improving product quality and productivity.
The blow point refers to the minimum degree of vulcanization required to eliminate the presence of bubbles generated by insufficient vulcanization inside the vulcanized material at the end of the vulcanization process when vulcanizing a composite containing rubber under pressure. Measuring the blow point is extremely important for producing products with a short vulcanization time and no bubbles at all. This blow point varies depending on the composition of the rubber compound, the mixing method, temperature conditions, and so on, so it is necessary to measure it very frequently for quality control of vulcanized rubber products and for research and development of rubber compositions.
It is a wire abrasion testing machine (scrape tester) for automobiles compliant with ISO 6722.
Place the needle, subjected to a vertical load (7N or 4N), on the insulator of the test specimen, and rub the surface of the insulator in both directions along the length of the test specimen.
It is a testing machine (tack tester) used to evaluate the tack value (adhesiveness and adhesive strength) of materials such as unvulcanized rubber and adhesive tape.
The PICMA Tack Tester is a testing machine that quantitatively measures the adhesive strength of materials such as rubber, adhesive tapes, construction sealants, printing inks and rolls, and food packaging materials.
![Non-contact hardening evaluation device Cure Tester 'DH-1' [Testable]](https://image.www.ipros.com/public/product/image/4ab/2000265301/IPROS43207030295884376320.jpeg?w=280&h=280)
Using digital holography, we achieve measurement and visualization of 3D objects! It enables management of the drying state on a second-by-second basis.
This product applies digital holography technology to non-contact and quantitative evaluation of the drying and curing processes of paints and adhesives, visualizing the drying distribution. By understanding the drying process, it enables the optimization of manufacturing lines, allowing for the calculation of the necessary amount of paint and the setting of drying times based on the desired painting conditions. Furthermore, it is expected to be applicable to the evaluation of the curing process of light-curing adhesives and the drying and curing analysis of ink dots, contributing to printable electronics.
![Helium leak testing contract service [Free technical materials and case study booklet available!]](https://image.www.ipros.com/public/product/image/8a3/2000156236/IPROS7262090082733200362.jpg?w=280&h=280)
【Technical Data Presentation】 No need for equipment purchases or the introduction of testing process equipment! A leak testing service that can handle accurate airtightness testing starting from just one product!
The "Helium Leak Testing Service" provided by Javic is a service used for evaluating the airtightness (leak testing) of products where even the slightest leak is unacceptable. You may not be able to purchase expensive equipment to conduct helium leak tests for a single product. You might not fully understand the testing methods. You may not want to damage the materials. You might not be able to invest in the costs of introducing testing process equipment. We also provide examples that address these concerns. 【Service Features】 ■ Can accommodate even a single product! ■ Uses helium gas, so there is no impact on materials or the human body ■ No need for the introduction of actual equipment ■ Achieves high-precision airtightness testing ■□■ Currently, we are distributing technical materials and case study booklets on helium leak testing for free! ■□■ *For more details, please download the "Case Study & Technical Materials" from the catalog download.
With the automatic analysis function, anyone can easily make judgments and assess deterioration.
It is possible to introduce ultrasound into concrete poles using a uniquely developed jig.
A compact wireless pile integrity tester that inherits the functions of the conventional PIT-V.
The "PIT-X" is a pile integrity tester that is about the size of a palm and uses a wireless type accelerometer. There are no cables between the accelerometer and the main unit, and it retains all the functions that were present in the conventional "PIT-V." It also includes a fast Fourier transform function that is particularly useful for detecting relatively short pile lengths. 【Features】 ■ Size is about the size of a palm ■ Uses a wireless type accelerometer ■ No cables between the accelerometer and the main unit ■ All functions from the conventional PIT-V are inherited ■ Equipped with a fast Fourier transform function that helps in detecting relatively short pile lengths *For more details, please refer to the PDF document or feel free to contact us.
Acoustic concrete tester equipped with a battery that can operate for one day.
The "ACT" is an acoustic concrete tester that uses sophisticated pulse-echo technology for measuring concrete thickness. It accurately measures the thickness of concrete structural components such as pavements, slabs, retaining walls, tunnel linings, and foundation footings. With this product, there is no need for adjustments to the input signal, measuring the wave propagation speed of the material, or drilling holes. 【Features】 ■ Accurately measures the thickness of concrete structural components ■ Capable of measuring the wave propagation speed of materials ■ Applicable for thicknesses from 75 to 900 mm ■ Easy-to-read display ■ Equipped with a battery that allows for a full day's work *For more details, please refer to the PDF document or feel free to contact us.
Automatically test ECU performance! ECU tester that can save files.
The ECU tester automatically inspects the performance of the ECU and can even execute judgments against standard values. Additionally, all data can be recorded as files that can be displayed and edited in Excel. For more details, please contact us or download the catalog.
Check the transmission path of HDBaseT (quality of LAN cables and installation environment) and HDBaseT compatible devices (extenders, projectors, etc.)!
This is an HDBaseT tester that allows for easy testing of the transmission path (quality of LAN cables and installation environment) and the HDBaseT compatible devices (extenders, projectors, etc.) used.
Wide compatibility from legacy radios to the latest wideband radios.
Capable of testing hand-held radios, amplifiers, couplers, cables, antennas, etc. Realizes over 16 testing functions in one unit. Windows-based interface. Available in two models: mobile model and high-performance stationary model. Seamless information sharing between units and field maintenance is possible with common software. We have mobile and high-performance stationary models available. Please refer to the brochure for more details.
This is an analog tensile testing machine, the Techno Tester, designed for simple operation while pursuing simplicity and functionality. The maximum load is 6 kN.
It is ideal for verification load testing in building equipment.
