Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
1951～1980 item / All 2913 items
Instant display of odor intensity in digital numbers. Switchable display of level and odor index.
Performance verification of deodorization devices and air purifiers. For measuring factory exhaust odors and quality control of various foods and spices.
Full name: Louvered-type Capacitive Rain and Snow Detector - A snow sensor for activating the snow melting device.
(Product Description) - Based on moisture and external temperature, the snow sensor determines whether the moisture adhered to its surface is rain or snow, activates a relay to operate devices such as snow melting systems, and outputs a detection signal externally (this model outputs a relay signal and RS485 external signal: wiring diagram available). - The capacitive rain and snow sensor is based on the reflection principle in the frequency domain, utilizing high-frequency electronic technology, and can measure with high sensitivity whether it is raining or snowing (capacitive detection diagram available). - The sensor incorporates a capacitor, thermometer, IC, and heater. - The moisture adhered to the sensor surface is detected by the potential difference of the capacitor, and the IC determines whether the moisture is rain or snow based on moisture and external temperature, activating the relay and outputting a detection signal externally. - After detecting rain or snow, moisture remains on the surface, so the sensor surface is dried with a heater to prepare for the next normal detection.
Horizontal plane non-directional wind speed sensor
This wind speed sensor is designed for measuring the wind speed of gases such as air. It is an omnidirectional sensor in a horizontal plane and is particularly used for measuring wind speed on the surfaces of objects. The standard measurement range for wind speed is from 0 to 20 m/sec. The shape of the sensor module can be selected according to the purpose and application, with options including a rod-type (Type E) and a flexible type (Type F). By using a 32-channel sensor drive base unit, it is also possible to construct a multi-channel wind speed measurement system.
By combining multiple 8ch or 32ch units, it is possible to build a multi-point pressure measurement system ranging from small to large scale.
The "SENJAS-SP / MP" is a multi-point pressure sensor with good response characteristics. It is also possible to install a low-pass filter card inside the sensor. By combining the common AD converter for SENJAS, the multi-point pressure measurement software SENJAS-P, and the automatic calibration option SENJAS-CAL, measurement accuracy can be improved by approximately twice. Configurations of up to 1344 channels are possible. It can be used for various applications such as wind tunnel experiments and pressure measurements in vehicles. "SENJAS-SP" In addition to the 32-channel unit, there is also an 8-channel unit, allowing for smaller configurations. The use of sensor sockets and interchangeable tube ports makes it easy to change tube sizes and sensor configurations. Maintenance costs and durations can also be significantly reduced. Configurations and expansions in units of 1 channel are possible. Each channel has an independent amplifier, and the power supply section is also independently structured to prevent any impact on other sensors in case of a sensor chip failure. It is also possible to store it in a compact EIA rack for multi-channel configurations. "SENJAS-MP" This series is mainly focused on space-saving. Up to 4 or 8 32-channel cards can be stored within a case. It has about two-thirds the volume of the SENJAS-SP.
Calibrated with a JCSS certified standard! Simultaneously measures gas temperature and relative humidity.
The "HRTU-100" is a temperature and humidity sensor that can simultaneously measure gas temperature and relative humidity. The measurement output is an analog "0-1V," and it employs a high-performance semiconductor temperature and humidity sensor in the detection section. Additionally, we offer optional items such as a "digital display" and an "analog display." 【Features】 ■ Simultaneous measurement of gas temperature and relative humidity ■ Measurement output is analog "0-1V" ■ High-performance semiconductor temperature and humidity sensor in the detection section ■ Can be screw-mounted in narrow spaces such as R1/8 and inside piping ■ Calibrated with a standard device certified by JCSS *For more details, please refer to the PDF materials or feel free to contact us.
Detects minute changes below the millimeter level! There is no interference or impact on medical devices or electronic equipment.
Japan G.I.T. Corporation is a company specializing in the development, design, manufacturing, and sales of advanced technologies, including UWB. The "UWB radar-based sensor" we handle detects minute changes of less than 1mm. It does not interfere with or affect medical devices or electronic equipment, and it contributes to privacy protection. It can also be applied to vital sensors and foreign object detection within processes. 【Features】 ■ Detects minute changes of less than 1mm ■ No impact on the human body due to the adoption of UWB ■ No interference or impact on medical devices or electronic equipment ■ Privacy protection ■ Compliance with domestic radio laws and design certification obtained *For more details, please refer to the PDF materials or feel free to contact us.
![[Presentation of Materials] What MI Thinks About IoT](https://image.www.ipros.com/public/product/image/746/2000360810/IPROS91612764255705385423.jpeg?w=280&h=280)
As much as possible, people should be able to do nothing. MI's envisioned IoT solution.
This document explains the IoT solutions envisioned by MI. Our company is an IoT professional equipped with everything necessary, from self-developed devices to network know-how and security SIMs. The devices we connect vary widely, including temperature and humidity sensors, surveillance cameras, and GPS, with diverse protocols and interfaces. Our self-developed routers retain connection logs on an embedded Linux server, allowing for accurate cause analysis and rapid response in case of emergencies. We build IoT solutions that connect things seamlessly, providing useful outputs without cumbersome operations, all in a one-stop manner. 【IoT Layers】 ■ Devices/Sensors: Solar power, surveillance cameras, building maintenance, water supply and drainage, etc. ■ Legacy Communication ■ Routers ■ Lines ■ Network Technology ■ Servers/Cloud *For more details, please refer to the PDF document or feel free to contact us.
In the event of a communication line failure, switching to a different carrier can be done in as little as 5 seconds.
Equipped with two LTE modules, it allows simultaneous connections with different carriers. In the event of a carrier failure, it automatically switches communication to a different carrier (failover), making it ideal for environments where communication cannot be interrupted, such as bank ATMs, transportation systems like buses and taxis, railways, broadcasting stations, power meters, rain gauges, and store POS systems. ■ Features - Minimum downtime of 5 seconds - Two LTE modules - Rich interfaces - Instant power failure response - Environmental performance in configuration - Equipped with Linux OS *For more details, please refer to the PDF document. Feel free to contact us with any inquiries.
Display gas temperature, absolute humidity, and relative humidity, and output each as an analog voltage.
The absolute humidity sensor TAA80 displays gas temperature, absolute humidity, and relative humidity, and outputs each as an analog voltage. A pressure-resistant type is also available. By simultaneously measuring relative humidity, reliable absolute humidity measurements can be achieved. The TAA801 is a high-precision type, while the TAA802 allows for field replacement of the sensor element. 【Features】 ○ The TAA801 is a high-precision type, and the TAA802 allows for field replacement of the sensor element. ○ The wide-range type can measure absolute humidity up to 588 g/m3 (equivalent to 100°C, 100% RH). ○ The resolution of the high-resolution absolute humidity voltage output is 0.06 g/m3. ○ The shape of the sensor part can be selected from standard type, pressure-resistant type, narrow space type, etc. ○ A variety of options are available, including dust filters and processing for condensation environments. ○ Traceability certification can be obtained. ○ Custom orders are accepted from one unit. *For more details, please contact us or refer to the catalog.
This is a humidity sensor that outputs relative humidity as an analog electrical signal. It comes in a variety of shapes and options.
* The sensor part and the circuit part are connected by a probe with a diameter of 14mm. * The probe length and extraction direction, among other shapes, are diverse. * There are various options available, including temperature sensors, waterproof and water-repellent processing for condensation environments, insulated resin probes, humidity displays, and sensor filter caps. * The duct type is equipped with two fixing through-holes and a rubber packing. * The humidity sensor element TI-A is compatible, so circuit adjustments are not necessary during replacement. * Traceability certification can be obtained. * The long-term change is excellent in durability, at 1% RH/year or less (under normal temperature, humidity, and clean environment). * Due to the built-in stabilized power supply, it can be used with a power supply voltage of DC 9-25V. * Custom products can be accommodated from a single unit, including changes in specifications and shapes.
Stable detection from a low magnetic field (0.5 mT)! A sensor using a Hall element in the detection part.
The "Magnetic Induction Sensor for AGVs" is a sensor designed to detect the magnetic flux of guide tape laid on the floor, guiding unmanned transport vehicles (AGVs) to their intended locations and allowing them to run along the route. It can stably detect low magnetic fields (0.5mT). Additionally, 15 magnetic sensors are arranged at 10mm intervals, with multiple magnetic switches positioned directly above the guide tape turning ON and outputting in parallel. 【Features】 - Non-contact, unaffected by dust, dirt, or oil - The induction sensor detects the magnetic field from the guide tape - Can be used by laying it on carpets or non-magnetic materials - Allows for the inexpensive and easy construction of automatic guidance systems - Easy route changes due to the attached double-sided tape - The material used makes it difficult for the double-sided tape to leave residue on the floor when the guide tape is removed *For more details, please refer to the PDF document or feel free to contact us.
No amplifier needed! Easy to handle! Recommended for those who want to easily check load displacement during the manufacturing process.
It is a capacitive "smart force sensor." No amplifier is needed, and it is resistant to overload, making it easy to handle. The output method is UART (standard). 【Features】 ■ No amplifier required ■ Strong against overload and easy to handle ■ Output method is UART (standard) ■ Just connect to a PC *For more details, please refer to the external link page or feel free to contact us.
Simplified and miniaturized the detection unit and signal processing unit! Strong against overload, making it easy to handle!
The "Smart Force Sensor" is a capacitive load displacement sensor that combines metal spring manufacturing technology with electronic control technology. It is very compact and does not require large auxiliary equipment like existing load cells. The detection and signal processing sections have been simplified and miniaturized. Additionally, by using an optional USB cable, you can easily check the output on a PC. 【Features】 ■ Capacitive type ■ No amplifier required ■ Strong against overload, making it easy to handle ■ Output method is UART (standard) ■ Achieves stable temperature characteristics and a wide operating temperature range * Demo units are available. * For more details, please refer to the PDF materials or feel free to contact us. * We have created a demo unit using the Smart Force Sensor and Arduino! Please check out the YouTube video!
Durable 25M roll of magnetic induction magnet for AGV made with PET film processing.
The "Magnetic Induction Magnet for AGV" is a magnetic tape used for magnetic induction type AGVs (Automated Guided Vehicles). By simply applying a guide tape (rubber magnet) to the floor, routes can be easily set, and it can flexibly accommodate layout changes. The surface is processed with PET film, making it very resistant to tearing and dirt. 【Features】 ■ Anisotropic magnet with a north pole surface ■ PET film processing on the surface side ■ Adhesive tape on the back side ■ One roll of magnet, 50mm or 30mm wide, 1.0mm thick, and 25m long *For more details, please refer to the PDF document or feel free to contact us.
Ideal for outdoor areas and locations with heavy objects moving! Embedded guide magnets.
The "Magnetic Induction Magnet for AGV" is a guide tape (rubber magnet) that is embedded in grooves dug into the floor surface. It is installed along the route to guide the AGV (Automated Guided Vehicle) to its destination. It is suitable for outdoor areas or places where heavy objects are frequently moved, as it creates a flat floor surface. 【Features】 ■ Anisotropic magnet with two grooves on the N-pole side ■ Available in types with a width of 6mm and thickness of 10mm, and width of 8mm and thickness of 20mm *For more details, please refer to the PDF document or feel free to contact us.
Easily adjustable detection distance! Since there is no oscillation circuit, sensors can be installed in a row. 【Magnetic Proximity Switch/Sensor】
The magnetic proximity switches and sensors we handle are of the magnetic type that detects magnets. These sensors use Hall elements in the detection part and can detect a wide range of magnetic fields from low (0.5mT = 5Gauss) to high (10mT = 100Gauss), making them applicable to various applications. There is no mutual interference, and unlike other proximity sensors, there is no oscillation circuit, allowing for the sensors to be installed side by side. 【Features】 ■ Non-contact detection ■ Detects objects (magnets) ■ Easy adjustment of detection distance ■ No mutual interference ■ Long lifespan *For more details, please refer to the PDF materials or feel free to contact us.
![[DALI Compatible] Ceiling Mount Sensor / DUS360CR-DALI](https://image.www.ipros.com/public/product/image/65a/2000798729/IPROS01211357342415444967.jpeg?w=280&h=280)
This is a ceiling-mounted 360° multifunction DALI sensor. It supports motion detection (PIR), infrared remote control reception (IR), and ambient light detection (PE).
This is a ceiling-mounted 360° multifunctional DALI sensor from the Philips Dynalite lighting control system. It supports motion detection (PIR), infrared remote control reception (IR), and ambient light detection (PE). *For more details, please feel free to contact us.*
![[DALI Compatible] Ceiling Surface Mount Sensor / DUS360CS-D](https://image.www.ipros.com/public/product/image/ead/2000798753/IPROS52099540800635229634.jpeg?w=280&h=280)
Ceiling-mounted 360° multifunction DALI sensor supports motion detection (PIR), infrared remote control reception (IR), and ambient light detection (PE).
This is a ceiling-mounted 360° multifunctional DALI sensor from the Philips Dynalite lighting control system. It supports motion detection (PIR), infrared remote control reception (IR), and ambient light detection (PE). Partial recessed installation is possible by removing the junction box. *For more details, please feel free to contact us.*
Ceiling-mounted 360° multifunction sensor with ultrasonic (UP) combined type, motion detection (PIR), infrared remote control reception (IR), and ambient light detection (PE).
It is a ceiling-mounted 360° multifunction sensor of the Philips Dynalite lighting control system. It supports ultrasonic (UP) motion detection (PIR), infrared remote control reception (IR), and ambient light detection (PE). *For more details, please feel free to contact us.
Supports a maximum detection distance of 30.5m! Compliant with IP54 standards for outdoor use! Long-range 30° multifunction sensor for wall and ceiling mounting.
This is a long-range 30° multifunction sensor for wall and ceiling mounting of the Philips Dynalite lighting control system. With a maximum detection distance of 30.5 meters, it can be used in large spaces. Additionally, it complies with IP54 standards, making it suitable for outdoor use. It supports motion detection (PIR), infrared remote control reception (IR), and ambient light detection (PE). *For more details, please feel free to contact us.*
Biomechanical analysis using inertial sensors
The COMETA dedicated software [EMG&MotionTools] is equipped as standard with biomechanics analysis using the wireless inertial/IMU sensor [WaveTrack]. It is capable of analyzing joint angle information for the upper body, lower body, and whole body. Additionally, it can be used in conjunction with COMETA's electromyography (EMG) sensors. The wireless electromyography/inertial sensor COMETA system is the most suitable system for biomechanics analysis.
Press the button after placing the fruit! Measure the internal quality of each fruit without damaging it.
The "QSCOPE-DT" is a tabletop internal quality sensor that can non-destructively measure the sugar content, acidity, ripeness, and internal defects of fruits. It allows for the measurement of each internal quality without damaging the fruit, and with the connection to a printer (optional), it is possible to print the measurement results. The target fruits include pears, apples, peaches, plums, mangoes, tomatoes, and persimmons. Simply place the fruit on the device and push the button. 【Features】 ■ Non-destructive measurement of sugar content, acidity, ripeness, and internal defects of fruits ■ Measurement of each internal quality without damaging the fruit ■ Printing of measurement results possible with connection to a printer (optional) ■ Just place the fruit and push the button *For more details, please refer to the PDF document or feel free to contact us.
![CO2 Demand Control Sensor [Exclusive for VENTOsan]](https://image.www.ipros.com/public/product/image/c82/2000488307/IPROS29759513762695187276.jpeg?w=280&h=280)
Automatically controls ventilation volume by sensing CO2 concentration.
When the indoor CO2 concentration reaches a certain level, the sensor responds and activates the VENTOsan fan at maximum airflow to maintain a comfortable indoor environment. *This is a dedicated sensor that can be additionally installed on our 24-hour heat exchange ventilation system "VENTOsan." It cannot be used alone or installed on products from other companies' heat exchange ventilation systems. ●Compatible models: VENTOsan series VENTOsan ZERO, VENTOsan SP, VENTOsan JW
Outstanding operability and graph display! A portable odor sensor that allows for baseline adjustment with each measurement.
"POLFA" is a portable odor sensor packed with convenient features such as excellent operability, graph display functionality, and outstanding response performance. The main unit is equipped with a data recording function, allowing for recording at any interval from 1 second to 30 minutes, enabling long-term odor observation. Additionally, it allows for baseline adjustments with each measurement. Relative evaluation based on the air at the start of measurement is possible, and if there is a deviation in the measurement values, it can temporarily revert to a baseline for measurement. 【Main Features】 ■ Data collection function ■ Zero adjustment function ■ Simple temperature and humidity meter ■ Graph display function ■ Peak hold function ■ Scale function *For more details, please refer to the catalog or feel free to contact us.
It is an alarm assistance device that alerts the operator with sound and the workers with sound and vibration when heavy machinery approaches from behind the workers.
- This is a warning assistance device that alerts the operator with sound and the workers with sound and vibration when heavy machinery approaches from behind the workers. - It is a NETIS registered product. [Registration No. KT-090057-VE] - A monitoring sensor is installed at the rear of the heavy machinery, and a warning buzzer is placed near the operator. (Magnet type) - The detection distance of the monitoring sensor can be switched; it is set to 10m when the heavy machinery is moving fast and 5m when it is moving slowly. - The monitoring sensor should be installed horizontally, at a height of 1.2 to 1.7 meters above the ground. - The monitoring sensor and warning buzzer are designed with a magnet for easy attachment and detachment. - Workers will attach a helmet sensor to the back of their helmets. (Rubber belt type) - The sensor attached to the back of the helmet does not detect within an approximate 120° range in front. - The monitoring sensor and helmet sensor are rechargeable. - Please specify the quantity of helmet sensors when placing an order.
The alarm sound will notify you of a water leak.
The "water leak sensor" detects water leaks over a wide area as water seeps into the belt. It has a built-in battery and is easy to install by simply placing or wrapping it. The belt can be reused after drying.
Lightweight and durable non-woven fabric! We accept inquiries regarding budget, size, body color, shape, and more!
This product is a non-woven fabric chair cover for promoting social distancing. Unlike paper and other materials, it is resistant to tearing and makes no noise, making it recommended for concert venues. Since it is in stock, we can offer it at a low cost and with speedy delivery. As part of measures to prevent droplet infection, calls to avoid crowding are essential. Let's utilize this product to encourage the reservation of empty seats in halls, auditoriums, lecture venues, and cinemas. 【Features】 ■ Reusable ■ Low cost & short delivery time ■ Available for small lot purchases ■ Lightweight and durable non-woven fabric ■ Custom options available for items like headrests *For more details, please refer to the PDF document or feel free to contact us.
It is a fully embedded type that measures the internal temperature of concrete. A method is adopted to calculate compressive strength from the accumulated temperature on-site! [NETIS registered product]
SmartRock3 does not require complicated wiring or terminal processing, unlike traditional wired types! Since it is completely embedded within the concrete, it does not affect the surface finish of concrete structures. There is no need to search for sensors under covers or verify electrical connections as before! Additionally, SmartRock3 adopts a method (maturity method) to calculate compressive strength from the accumulated temperature on-site, accurately estimating concrete strength based on specific temperature, time, and compressive strength according to the calculation formula of ASTM C1074 standards. ★Contact Information KEYTEC Corporation Tokyo Office 03-5534-8881 (Contact: Mikami, Assistant: Iikuni) Kansai Office 078-200-5217 (Contact: Kabumoto, Assistant: Izawa) ★Registered in NETIS on May 28, 2020!
Compact type with built-in amplifier function! Made with silicone that excels in heat resistance and chemical resistance.
The "Shock Sensor Chip" is a multi-axis tactile sensor that achieves thinness and miniaturization through microfabrication using MEMS technology. The exterior resin is made of silicone, which has excellent heat resistance and chemical resistance with low compression permanent deformation. It features excellent mass production capability and high convenience for implementation as a MEMS sensor. Additionally, the "6DoF-P18" is a compact type with a built-in amplifier function, capable of simultaneous measurement of forces in six axial directions. 【Features】 <6DoF-P18> ■ Capable of simultaneous measurement of forces in six axial directions ■ Connector implemented on PCB to improve interchangeability ■ Compact type with built-in amplifier function ■ Digital output *For more details, please refer to the PDF materials or feel free to contact us.
Measuring the amount of compression on the sponge surface! A flexible tactile sensor capable of detecting displacements in three-dimensional directions.
The "Shock Cube RT" is a sensor that achieves softness through the fusion of light and sponge. By measuring eight points on the sponge surface, it is capable of detecting surface tilt. This Shock Cube is specialized for use in robot fingertips and is equipped with mounting holes for installation and removal. Additionally, it has a compact shape (length × width × thickness: 30 × 15 × 7 mm) and employs RS485 communication. 【Features】 ■ Measures the amount of compression (displacement) on the sponge surface ■ Specialized Shock Cube for robot fingertip applications ■ Compact shape (length × width × thickness: 30 × 15 × 7 mm) ■ High-density sensing points (4 × 2 = 8 points) ■ Equipped with mounting holes for installation and removal ■ Utilizes RS485 communication *For more details, please refer to the PDF document or feel free to contact us.
