Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 27 items
DVI-D signal can be extended up to 50m with a DVI cable using the DR01 repeater!
DR01 is a repeater that can extend DVI-D signals (single link) up to 50 meters using a DVI cable. It supports input signals of DVI-D up to 1080p or 1920✕1200.
Ethernet signal transmission can be extended up to 500m. Low power consumption of only about 1.2W suppresses attenuation.
The "PoE/PoE Plus Power Supply Ethernet Repeater" is a product that extends the transmission distance of Ethernet by up to 200m with a single unit. It can connect up to four units between hosts, allowing for a maximum extension of 500m. With a low power consumption of approximately 1.2W, it minimizes attenuation while supplying power to PoE devices. We offer two products in our lineup: "Standard Type" and "IP65 Waterproof and Dustproof Type." It also supports 1000BASE-T, making it suitable for high-capacity data transmission. 【Features】 ■ Supports STP cables/connectors for noise-resistant transmission ■ Extends Ethernet at 10/100/1000M speeds ■ Operates on PoE power, eliminating the need for an additional power supply ■ Wide operating temperature range of -40 to 75°C (Waterproof and Dustproof Type) *For more details, please refer to the documentation. Feel free to contact us with any inquiries.
Repeater IP09 for extending 100M Ethernet up to 260m (130m on each input/output side)!
The IP09 is a repeater that extends 100M Ethernet up to 260m (130m on both input and output sides) and 10M Ethernet up to 500m (250m on both input and output sides). It can also be connected in a 1-to-1 configuration and used as a transmitter, with a transmission distance of up to 500m for 100M Ethernet and up to 800m for 10M Ethernet between two IP09 units. The distance can be extended with each additional unit. *The set of 2 units of IP09 (with power adapter included) is model number: IP09K. - Supports 10BASE-T/100BASE-TX/100BASE-T1 - Auto MDI/MDI-X compatible - Supports full duplex and half duplex communication - Supports EEE (Energy-Efficient Ethernet) - Built-in surge protector (with withstand voltage: 1.5kV)
PHLY Mini Camera Link Repeater
PHLY is the ultimate solution for extending all Camera Link configurations (Base, Medium, Full) with Camera Link cameras up to 85MHz. It features a mini Camera Link connector and a slim yet sturdy metal case. PHLY supports high-speed data transmission and PoCL. With its state-of-the-art design, it facilitates easy and simple future system requirement expansions. PHLY is optimized for space-saving and cost performance, making it a recommended Camera Link repeater.
PHORTE CoaXPress Repeater 4ch (Quad)
The PHT4-RP-T is a 4-channel CoaXPress repeater. It allows for easy extension of the transmission distance for CoaXPress interface cameras. It also supports PoCXP, enabling power supply from the frame grabber as well as to the camera.
Extend gigabit PoE up to 300m with PoE power alone.
● Gigabit Ethernet and PoE extension up to 100m ● With a low power consumption of just 2W, it allows for daisy-chain connection of two devices, achieving a 300m extension ● Plug & play connection enabled by auto-sensing ports with speeds of 10/100/1000Mbps ● Supplies power according to the IEEE802.3af standard, suitable for connecting VoIP phone systems, access points, and IP cameras ● No crossover cable needed upon connection due to MDI/MDI-X auto-sensing ● Up to 7W power supply available for PoE PD devices during daisy-chain connection ● Models available with 1 PoE output port and an additional 3 non-PoE 10/100/1000 ports
HD-SDI repeater that can extend the wiring distance of Full HD cameras.
■Features ● By using a repeater, the wiring distance from the camera can be extended. ● By connecting a repeater (VH-RV300) to the combination of the HD-SDI converter (VH-DP100) and the HD-SDI power overlay unit (VH-VP200), the wiring distance can be extended.
Datavideo VP-633, VP-634 SDI Repeaters
This product is designed to be very compact and easy to use when long-distance transmission is required for recordings and broadcasts in concert halls and stadiums. By using the VP-633 as the main unit and connecting up to two VP-634 units in cascade to the sending equipment such as cameras, long-distance transmission can be achieved. * The VP-634 does not require a power supply. (In outdoor use, it must be ensured that there is no condensation.) * It is recommended to use cables without joints for cascade connections of this product (please note that increasing the number of joints will shorten the transmission distance. Additionally, the type of cable used will also affect the distance).
RS001R, a repeater that can extend RS485 signals up to 2,400 meters using UTP cable!
- Extends 2-wire RS485 signals up to a maximum of 1,200m at both ends. (By receiving and re-outputting the RS485 signal, transmission of up to 2,400m is possible.) - Supports 2-wire half-duplex communication. - Communication speed supports up to a maximum of 115200bps. - Insulation structure up to 2.5kV.
PoE/PoE Plus compatible Ethernet repeater that can extend up to 500m for 10/100/1000M!
JPX201 / JIPX201 (waterproof type) is an Ethernet repeater that supports 10/100/1000M PoE/PoE Plus power receiving. It operates by receiving PoE or PoE Plus and extends Ethernet up to 200m. Additionally, it can connect up to 4 devices, allowing for an extension of up to 500m. It is capable of supplying power to devices compatible with PoE or PoE Plus.
HDMI 4K compatible repeater HR01-4K6G that amplifies/corrects and reoutputs attenuated HDMI signals!
The HR01-4K6G is an HDMI repeater that amplifies and corrects attenuated HDMI signals for re-output. - Supports up to 4K 60Hz 4:4:4 HDMI video signals - Capable of transmitting signals up to 18Gbps - Audio supports LPCM 7.1CH 192kHz 24bit, Dolby TrueHD, DTS-HD MA - Compatible with HDCP 1.4/2.2 - CEC pass-through - Power adapter included *The transmission distance depends on the specifications of the cable used.
Gigabit-compatible Ethernet repeater SR01X that can extend Ethernet up to a total of 240m, with a maximum of 120m on each end!
The SR01X is a gigabit-compatible Ethernet repeater that can extend Ethernet transmission, which typically only reaches up to 100 meters with a standard LAN cable, to a maximum of 120 meters at each end, for a total of 240 meters. By using multiple units, the transmission distance can be further extended.
10/100/1000Mbps PoE+ compatible Ethernet power supply repeater IP04R!
The IP04R is a PoE+ compatible Ethernet power supply repeater for 10/100/1000Mbps. - Extends Ethernet wiring over 100m - Supports IEEE 802.3bt (PoE++ 90W) and supplies up to 50W (for 100m on both ends) - Allows connection between IP04R units with a maximum LAN cable length of 140m - Compatible with IEEE802.3af/IEEE802.3at/IEEE802.3bt - Supports AutoMDI/MDI-X - No power supply is needed for the IP04R as it operates on PoE - Can supply power to connected PoE powered devices - Can connect LANs with different communication speeds, such as 10BASE-T to 1000BASE-T - Built-in ESD (electrostatic discharge) protection - No configuration is required *Note: It does not support connections to devices other than PD (powered devices). (It cannot be used for extending between Ethernet switches, etc.)
PHANTA Camera Link Splitter/Repeater Full/Medium/Base Compatible
The PHANTA family is designed to allocate images captured by CameraLink cameras to multiple frame grabbers, and can be applied to centralized parallel image processing, image monitoring, and real-time image analysis. The entire PHANTA series supports a maximum pixel clock rate of 85MHz. User applications: 1) 1-to-4 splitter: full/medium/base configuration 2) Two integrated 1-to-4 splitters: base configuration 3) 1-to-8 splitter: base configuration. A master frame grabber can be designated for control and camera settings. Image data and camera control signals can be independently controlled via DIP switches or through the PC's COM port, with pixel clock-controlled image data being equally transmitted in sync to all frame grabbers.
