Processing Technology Product List and Ranking from 44 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

Processing Technology Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. 大蔵工業 Hiroshima//Building materials, supplies and fixtures manufacturers
  2. 尾張整染 Aichi//Building materials, supplies and fixtures manufacturers
  3. サン・アクト Aichi//Other construction industries
  4. 4 東京鋲兼 Tokyo//others
  5. 5 ハブ硝子 Osaka//Other construction industries
Go to Company Ranking

Processing Technology Product ranking

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. Mosquito prevention product "Mosquito Shut-kun." 大蔵工業
  2. Owari Seisen Co., Ltd. Business Introduction 尾張整染
  3. Processing technology "MG Clean Coat (MGC)" サン・アクト
  4. 4 Precision engraving with lasers and color marking processing technology. 東京鋲兼
  5. 4 Glass processing technology "GLASMOND" ハブ硝子

Processing Technology Product List

16～30 item / All 127 items

Displayed results
Surface finish after barrel polishing

Surface finish after barrel polishing

Advanced inspection equipment and abundant processing facilities that support productivity and technological capabilities! Introduction to glossiness and surface color.

Barrel polishing is a very suitable polishing technique for rounding the edges of machine parts and metal components. It is evaluated based on three factors: surface roughness, glossiness, and surface color, with customer requests such as "finer," "shinier," and "whiter." While surface roughness and corner radius are indicated in the drawings, requests regarding glossiness and color are mostly expressed in abstract terms. The shape of the surface irregularities, or surface characteristics, varies depending on the processing conditions and polishing materials used in our company. Since we do not have color difference meters or gloss meters, the evaluation is based on visual inspection rather than numerical assessment. However, we strive to respond to requests as much as possible by clarifying differences in surface conditions using magnified images from a microscope. *For more details, please refer to the PDF document or feel free to contact us.*

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Removal of black discoloration layer [barrel polishing]

Removal of black discoloration layer [barrel polishing]

Solving problems through oil removal (degreasing) and optimization of processing conditions! Introduction of a case study on barrel polishing.

This is a case study on the removal of black discoloration layers. We received an inquiry from another barrel polishing company stating, "We had barrel polishing done, and while the burrs were removed, the surface of the item was delivered discolored black compared to before the polishing. We cannot deliver it to our customer in this condition, so is there any way to restore the material's color?" We performed barrel polishing at our company, removing the black discoloration layer and returning it to the original material color. Depending on the type and amount of oil on the raw material before barrel polishing, as well as the polishing conditions, dirt can sometimes adhere to the surface. This issue can be resolved through oil removal (degreasing) and optimization of processing conditions. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Spring processing technology "Tension Spring"

Spring processing technology "Tension Spring"

Mass production is possible even with special shapes! We also accept design and manufacturing of spring shapes based on functionality.

A "tension spring" is a type of spring that utilizes the repulsive force generated by pulling. It is widely used as various mechanical components, and hooks or alternative fittings are attached to both ends to apply load. In our tension spring processing, we mainly handle products ranging from Φ0.4 to 4.0. [Applications] ■ Automobiles ■ Home appliances ■ Building materials ■ Industrial equipment ■ Agricultural machinery, etc. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ono Rubber Industry Co., Ltd. Rubber Processing Technology

Ono Rubber Industry Co., Ltd. Rubber Processing Technology

Love rubber, know rubber, make the most of rubber. We will meet any request.

We would like to introduce you to the rubber processing technology of Ono Rubber Industry Co., Ltd. We offer "rubber lining processing" that can accommodate short delivery times of as little as 2 business days, as well as rubber sheets "MeDeuS" that can be detected by metal detectors and X-ray detectors. Our company supports all aspects of rubber manufacturing and processing, from development to mass production. Please feel free to contact us when you need assistance. 【Processing Technology】 ■ Rubber lining processing ■ Rubber processing ■ Rubber magnets ■ Rubber sheets that respond to metal detectors ■ Powder composite technology *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Matsubara Iron Works - Tooling (prototype jigs, product inspection jigs, etc.) - Design and Manufacturing

Matsubara Iron Works - Tooling (prototype jigs, product inspection jigs, etc.) - Design and Manufacturing

We mainly manufacture jigs for prototype production for automotive parts manufacturers (secondary manufacturers) and inspection jigs for product accuracy verification.

We are working with a small team, but everyone shares their opinions from the design stage of the jigs to eliminate waste and mistakes. Each member takes responsibility for all aspects of part production (from materials to canning to machining to individual precision checks) and we will respond with short lead times.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Machining technology utilizing megahertz ultrasonic vibrations.

Machining technology utilizing megahertz ultrasonic vibrations.

Machining technology using ultrasonic systems (sound pressure measurement analysis, oscillation control).

The Ultrasonic System Research Institute has developed "ultrasonic oscillation control (processing) technology" that utilizes the acoustic characteristics (vibration response characteristics and nonlinear phenomena) of objects (tools, target items, etc.) through a sound pressure measurement analysis device (ultrasonic tester) and a megahertz ultrasonic oscillation control probe. With this developed technology, it has become possible to control nonlinear vibration phenomena in target objects through "ultrasonic oscillation and output control," achieving dynamic control of ultrasonic waves (changes in bispectrum). The original ultrasonic oscillation control probe allows for the utilization and control of nonlinear effects of ultrasonic vibrations. This is an effective ultrasonic utilization (control) technology tailored to applications such as processing, cleaning, surface modification, and promoting chemical reactions. There are interactions with the acoustic characteristics of cutting tools (drills, reamers, cutters, knives, etc.) and the size and material of cutting oils, jigs, and target objects, making the analysis (self-correlation, impulse response, contribution rate, bispectrum) complex. However, various optimizations based on the analysis results of sound pressure measurement data become possible.

  • Scientific Calculation and Simulation Software
  • Other measuring instruments
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface roughness machining technology (fluid control components)

Surface roughness machining technology (fluid control components)

Leave NC composite lathe processing to us!!

We have fixed spindle automatic lathes and spindle moving automatic lathes with chucking machines (finishing machines). We have a track record of machining for taper processing and fluid control components (seal parts). Including surface roughness (actual value Rmax 3.2S or below), angle management, measurement methods for diameters during fluid sealing (of counterpart components), and handling of products, please consider our company for complex NC combined lathe machining.

  • Air conditioning equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Processing technology "Deep Drawing Process"

Processing technology "Deep Drawing Process"

High-speed production of thin-walled deep hole shapes, which are difficult to process from wire material, is possible with a single processing machine. "Deep drawing processing" technology.

Deep drawing processing is a machining technique that enables the rapid creation of thin-walled deep hole shapes, which are difficult to process from wire materials, by repeatedly processing thin metal sheets. In Fukui Bolt's deep drawing processing, the number of processes is set while considering the loads (stresses) on the materials and molds during processing, allowing for excellent internal balance in the process design. As a result, it is possible to mass-produce complex shapes that combine various machining techniques such as thin hole processing, deep hole processing, irregular hole processing, and lateral hole processing using a single machining machine. For more details, please contact us.

  • Subsidiary materials
  • Other opening accessories (airtight materials around doors and windows, etc.)
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Oshin's IH processing technology

Oshin's IH processing technology

Handcrafted processing! We will modify clay pots that cannot be used with IH cookers so that they can be used with IH as well.

Oshin's IH-compatible processing began with the adaptation of aluminum pots and steak plates that cannot be used on IH stoves. In 1991, we received a request for IH processing of "donabe" (earthenware pot) for restaurants, and we thought that using carbon, which had not been used before as a heating element, could meet this demand. This marked the beginning of our development of IH donabe. At that time, there were no factories or specialized machines for processing ceramics or carbon that we needed. Therefore, we started with research and development, including the selection of processing machines and the development of tools. [Features] ■ Processing to make donabe that cannot be used on IH cooking devices compatible with IH ■ Handcrafted IH processing for each piece ■ The thickness of the heating element and the taper angle are selected based on the type of IH stove used by the customer, as well as the cooking content, to suit different simmering and warming times. *For more details, please refer to the PDF document or feel free to contact us.

  • Other store equipment and supplies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Etching processing technology

Etching processing technology

High-precision machining without burrs, distortion, or work hardening! It is suitable for mass production as it can process multiple parts simultaneously.

We will introduce the technology of "etching processing," which involves dissolving metal through the corrosive action of chemicals such as etching solutions. "Double-sided etching" is effective when dimensional accuracy is required, while "single-sided etching" is useful for processing thin materials or when a taper is needed. Additionally, unlike through-processing, there is "half-etching," which involves processing an etching pocket to a thickness of about 50-70%. 【Types of Processing】 ■ Double-sided etching ■ Single-sided etching ■ Half-etching * Products by Meltec Co., Ltd. * For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precision engraving with lasers and color marking processing technology.

Precision engraving with lasers and color marking processing technology.

We can accept orders starting from one unit and propose suitable lots for event exhibitions and prototypes!

Our company is capable of laser engraving on metals, non-ferrous materials, as well as wood, resin, glass, and ceramics. We can achieve extremely fine engravings, and you can trust us with processing cylindrical components. With color marking, it is possible to engrave and color materials such as stainless steel and titanium using fiber lasers. The colors appear due to the interference between the light reflecting off the oxide film and the light reflecting off the stainless steel base. 【Features of Laser Marking Processing】 - Capable of processing a wide range of metals, including iron, aluminum, stainless steel, and brass, regardless of whether they are ferrous or non-ferrous. - In addition to metals, we can also work with wooden products, ceramics, ABS resin, and some plastics. - We can apply our services to various materials, including molded products, machine parts, nameplates, various tools, and camping equipment. - Precise engraving can be done on very small areas, such as the top surface, beveled edges, and inside hexagonal holes. - We can remove only the surface treatment film to reproduce the underlying material. *For more details, please download the PDF or feel free to contact us.

  • Processing Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Saito Woodworking's processing technology (pre-cut, special processing)

Saito Woodworking's processing technology (pre-cut, special processing)

Supports material width of 300mm × material thickness of 4,000mm × material length of 30,000mm! Processing for CLT and LVL is also possible.

We will introduce Saito Wood's processing technology (pre-cutting, special processing). In wood material processing, we can handle materials with a maximum width of 300mm, thickness of 4,000mm, and length of 30,000mm using NC processing machines. In addition to laminated timber and sawn timber, we can also process CLT and LVL. Furthermore, if the joining hardware is not a standard product but a custom-made item, we can have our partner company manufacture the hardware and process it with the NC machine to fit the hardware. 【Features】 - Processing for traditional construction methods and hardware methods using pre-cutting machines - Capable of handling materials with a width of 300mm, thickness of 4,000mm, and length of 30,000mm - Processing available for CLT and LVL in addition to laminated timber and sawn timber - If the joining hardware is custom-made rather than a standard product, it can be manufactured by a partner company *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Technology
  • wood
  • Wood processing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small to large lot support! Aluminum cold forging technology that enables cost reduction.

Small to large lot support! Aluminum cold forging technology that enables cost reduction.

We have equipment that can handle high quality and both large and small lots based on a consistent manufacturing line, achieving cost reduction!

The "cold forging" that Sankyo Seisakusho specializes in is a processing method that uses molds to plastically deform the work material (aluminum) at room temperature. This processing method has high productivity unique to cold working, and it also offers good dimensional accuracy and surface roughness. However, since it involves applying very high pressure at room temperature for plastic deformation, it requires extensive technical know-how in design and mold manufacturing that takes into account the cracking of the work material and the deformation, wear, and cracking of the molds. 【Features】 ○ High dimensional accuracy of products ○ Economically inexpensive ○ Low mold costs ○ High strength ○ Capable of forming large diameter long products For more details, please contact us or download the catalog.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Honda Seiki Co., Ltd. Business Introduction

Honda Seiki Co., Ltd. Business Introduction

We provide a wide range of technologies related to "monozukuri" (manufacturing)!

Honda Seiki Co., Ltd. responds broadly to customer needs, ranging from single-item and small-lot parts processing to large machine manufacturing, including design, various machine tools, welding and sheet metal work, hard chrome plating and precision grinding, assembly and installation, etc. In the future, we will improve cost performance in productivity by utilizing OA and FA systems that organically connect all employees, while promoting research and development of new technologies aimed at a future society. 【Business Description】 ○ Precision machinery manufacturing For more details, please contact us or download the catalog.

  • Aluminum Mirror

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Owari Seisen Co., Ltd. Business Introduction

Owari Seisen Co., Ltd. Business Introduction

Dialogue and sincerity that support technology! We will introduce the main production technologies that form the foundation of production!

Owariasozai Co., Ltd. is a company that specializes in dyeing and finishing processes for automotive, interior, and apparel fabrics. As the foundation of our production, we possess key production technologies such as "printing technology" that applies dyes and pigments to the fabric surface to create designs (patterns), as well as "embossing technology," "brushing technology," and "back coating processing technology." We are aware that our strength lies in "constantly challenging ourselves in technology" and are actively engaged in the development of new processing technologies. 【Basic Technologies】 ■ Printing Technology ■ Embossing Technology ■ Brushing Technology ■ Back Coating Processing Technology ■ Bristle Technology *For more details, please refer to the related links or feel free to contact us.

  • Exterior Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.