Last Updated： Aggregation Period:Dec 03, 2025～Dec 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 03, 2025～Dec 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 03, 2025～Dec 30, 2025
This ranking is based on the number of page views on our site.
196～210 item / All 562 items
We can perform bevel processing of column-shaped steel materials from large column welding surfaces to square pipes and round pipes.
【Main Implementation Results】 Various manufacturers of architecture and building materials 【Supported Materials】 Columns, square columns, circular columns, etc.
Semiconductor cleaning equipment processing tank, splash prevention partition. A wide range of processing is possible from acrylic and polycarbonate to wood materials.
Currently, there is an expanding demand for semiconductor cleaning equipment, processing tanks, and splash prevention partitions, which are being used in manufacturing sites. Since we also accommodate the processing of resin materials, we have been utilized by small plastic machine parts manufacturers and event/stage equipment production companies for creating three-dimensional objects from expanded polystyrene. Of course, we also cater to wood materials and plywood, which are used in door processing, design furniture manufacturing, and even in the carving of transoms, thus supporting a wide range of processing across various industries. 【Main Implementation Achievements】 Furniture, fittings, building materials, resin manufacturers, event and stage equipment production companies, musical instrument manufacturers, design furniture manufacturers, etc. 【Supported Materials】 Acrylic, polycarbonate, wood materials, plywood, resin-based materials, insulation materials, gypsum board, etc.
Pursuit of operability. Achieving efficiency in heavy cutting processing.
The VXW-7 series supports the efficiency and quality improvement of bevel processing operations with a simultaneous dual-axis upper and lower machining unit and a simplified operating system. It is also capable of cutting wear-resistant steel. Maximum processing plate thickness is 80mm. *Processing conditions apply. 【Features】 - Standardized dual-axis follow machining significantly increases the efficiency of upper shape processing. - Upper axis bevel angle from 0° to +84.3°, lower axis bevel angle from -60° to +35° (optional +45° available). - Supports a maximum plate thickness of 80mm *Processing conditions apply. - Heavy cutting of wear-resistant steel and other materials is made possible through our unique technology accumulation and frame improvements. - It is possible to incorporate a chip conveyor, eliminating the need for separate foundation work. *For more details, please refer to the PDF document or feel free to contact us.
A new model that combines only the advantages of the conventional type!
The "D Series" is a wire rope processing machine that demonstrates high functionality in the crimping of terminal fittings. By increasing the frame cross-sectional area, we pursue high rigidity, and further, by minimizing the front and rear dimensions of the frame to the extreme, we achieve improved workability. 【Features】 ■ No welding joints ■ Pursuit of high rigidity ■ Improved workability ■ Prevention of die wobble ■ Labor-saving repairs *For more details, please contact us.
Trust in 'Teiketsu Ka'! The C-type lock processing machine from Sanyo that achieves compactness and lightweight design.
The "C-170 model" is a locking processing machine from Sanyo Co., Ltd., which manufactures and sells equipment for wire processing. With side entry and exit, it reduces the processing steps compared to previous methods. It significantly secures workspace and contributes to improved work efficiency. Additionally, it adopts a digital pressure setting, allowing for one-touch setting of the desired pressure. 【Features】 ■ Achieves compact and lightweight design ■ Reduces processing steps with side entry and exit ■ Secures ample workspace, improving work efficiency ■ Adopts digital pressure setting ■ Allows for one-touch setting of desired pressure *For more details, please refer to the PDF document or feel free to contact us.
High functionality demonstrated in the crimping process of terminal fittings! A new model that combines only the advantages of traditional types.
The "D-500/D-700" is a wire rope crimping machine that demonstrates high functionality in the crimping process of end fittings. The pressure setting is digital, allowing for one-touch adjustment to any desired pressure. 【Features】 ■ Thick plate cut-out and welded frame: No welding joints ■ Increased frame cross-sectional area: Pursuit of high rigidity ■ Frame dimensions minimized to the extreme: Improved workability ■ Die moves up and down with an inner guide in the frame: Prevents die wobbling ■ Easy attachment and detachment of the cylinder: Reduces repair labor *For more details, please refer to the PDF document or feel free to contact us.
Even beginners can easily process it! Wire ropes for lifting can be manufactured on board ships.
The "LH-16" is a wire rope processing machine that can manufacture lifting wire ropes on forestry and marine sites. With a manual output of 500KN (50TON), it can be easily operated even by inexperienced users. Additionally, it allows for easy pressure verification, ensuring a consistent fastening force. 【Features】 - Capable of manufacturing lifting wire ropes on forestry and marine sites - Easy to operate even for inexperienced users - Easy pressure verification - Ensures a consistent fastening force *For more details, please refer to the PDF materials or feel free to contact us.
Easy to use, even for beginners! Simple type wire rope lock processing machine.
The "GLD-170D" is a simple type of wire rope lock processing machine that operates pressure - neutral - return with a lever. The pressure setting is digital, allowing for one-touch setting to any desired pressure. Additionally, it is easy to use, making it suitable for beginners. 【Features】 ■ Simple type ■ Digital pressure setting allows for one-touch setting to any desired pressure *For more details, please refer to the PDF document or feel free to contact us.
![[Long-selling in the wooden mold industry] Gantry-type 3-axis machining center 'SWM Series'](https://image.www.ipros.com/public/product/image/5cf/2000328759/IPROS13557229746776332681.jpg?w=280&h=280)
This is a gantry-type three-axis machine that can be customized to order.
The "SWM Series" is a three-axis gantry machining center that has received high praise in the wooden mold industry. The table moves back and forth, while the spindle moves left and right, as well as up and down, to perform machining operations. It is equipped with an automatic tool changer for automatic tool exchange. With an automatic tool length measurement device, there is no need to measure with a base master, providing a user-friendly feature. This is an NC model machining center that achieves smooth machining shapes with AI contour control I. Thanks to the FANUC spindle motor, it is capable of machining with stable torque from low to high speeds. Additionally, it uses high-rigidity precision linear guide ball screws, allowing for smooth axis movement. 【Features】 ■ Custom-made specifications available ■ Control unit: FANUC 0i-MF ■ All axes driven by ball screws ■ Automatic tool length measurement ■ Automatic centralized grease lubrication system *For more details, please download the PDF or feel free to contact us.
High-speed rotating 6-axis turret spindle with tool exchange for resin processing.
The "SWR Series" adopts patented technology of a non-contact magnetic gear, allowing it to rotate the spindle at a maximum speed of 60,000 RPM, even though it uses bevel gears. Because it is non-contact, the heat from the spindle motor is less likely to transfer. This non-contact gear technology enables tool changes with a turret system for high-speed spindles, making the machine itself very compact. The tool change indexing speed is fast, allowing for tool changes in about 3 seconds on this NC high-speed router machining machine. Additionally, with FANUC AI contour control, we have achieved a reduction in shape errors at high feed rates. **Features** - Non-contact gears prevent heat from the spindle motor from transferring to the holder. - Non-contact gears eliminate vibrations caused by rotational transmission. - Non-contact gears allow for rotation at 60,000 RPM. - Six ATCs with a 6-axis turret eliminate the need to line up high-speed spindles. - Fast indexing speed. - Excellent dust collection capability does not hinder machining. *For more details, please download the PDF or feel free to contact us.*
Compact and smooth 5-axis machine
<Optimal for wooden molds, foam molds, and trimming applications> The gantry-type 5-axis machining center [SWM5 series] features a compact, specially designed built-in spindle that allows the cutting tool to reach intricate areas. With a 3.7 kW spindle operating at 15,000 min-1, it powerfully processes materials such as wooden molds, resin, chemical wood, carbon, and FRP. Equipped with AI contour control 2 and tip point control, it enables simultaneous 5-axis machining, achieving smooth processing. 【Custom Orders from Sawai】 1. The specifications of the table can be customized to meet customer preferences. - T-slot table - Vacuum table - Tapping specifications, etc. 2. The table size can be tailored to customer requirements. - 2500mm x 1200mm (standard) - 4000mm x 2000mm (large order) - 1000mm x 1000mm (small order) *For more details, please refer to the PDF document or feel free to contact us.
We can process such long steel materials!! Drilling and tap milling for long materials like H-beams, channel steel, and angle steel!
The "SWF Series" is used by companies that process and sell steel materials for building materials when they provide added value through processing. It is an NC long-length steel processing machine that maintains stable positioning accuracy over a long period, utilizing linear guides and ball screws on each axis, and the X-axis is equipped with a TCG runner (roller pinion rack). By using a frame structure and #45 linear guides, it enhances machine rigidity compared to the conventional SWS series, enabling quick acceleration and deceleration as well as high-torque processing. The dedicated conversational programming device reduces programming time, and since this program can be operated for a long time, cost-effectiveness can be expected. 【Features】 ■ "Easy Setup" with comprehensive standard equipment (clamps, work stoppers, tool length measurement device, grease lubrication device, coolant circulation device) ■ "Tool Change Anywhere" with ATC linked to the X-axis (time-saving through on-site tool changes) ■ "Easy Input" with long-length programming software "S-SYSTEM" *For more details, please refer to the PDF materials or feel free to contact us.
![[Production Example] Carbon Plate Processing Machine](https://image.www.ipros.com/public/product/image/bbc/2001165010/IPROS94845723278476171024.jpeg?w=280&h=280)
Drilling holes, milling, and finishing processes on materials like carbon sheets! Case study of the 'Carbon Sheet Processing Machine'.
We accept orders for the manufacturing of "carbon sheet processing machines." Materials can be set on the suction table, allowing for milling and hole processing to achieve the desired thickness. The main spindle is equipped with a dust collection hood, enabling processing while collecting chips. This machine, with its table movement, can process the thickness of sheet materials with high precision. 【Case Overview】 ■ Application: Drilling, milling, and finishing processing of sheet materials such as carbon ■ Main Industries: Material manufacturers, etc. *For more details, please refer to the PDF document or feel free to contact us.
![[Production Example] NC Long-Length Processing Machine with Punch Press](https://image.www.ipros.com/public/product/image/a21/2001165057/IPROS36659824375807635560.jpeg?w=280&h=280)
Achieving high-speed processing for workpieces with numerous hole machining in angle and channel shapes!
We would like to introduce a case study of the "Punch Press Equipped NC Long Material Processing Machine." This long material processing machine is equipped with a punch press unit next to a swiveling spindle (SA type). It achieves high-speed processing for workpieces with numerous hole operations, mainly for angle and channel shapes. It can perform hole processing at approximately 20 times the speed of processing done with an end mill. 【Case Overview】 ■ Application: For customers processing long aluminum materials such as aluminum sashes and curtain rails ■ Main Industry: Building materials industry, etc. *For more details, please refer to the PDF document or feel free to contact us.
![[Production Example] Vice Self-Propelled NC Long-Length Processing Machine](https://image.www.ipros.com/public/product/image/f89/2001165073/IPROS37406473073611932114.jpeg?w=280&h=280)
Equipped with a self-propelled vice! Automatically moves to reduce the risk of spindle interference and other issues.
We would like to introduce a case study of the "Self-Propelled NC Long Material Processing Machine." This machine is equipped with a self-propelled vice that features a servo motor attached to the air clamp vice included with the long material processing machine. The air clamp vice automatically positions itself according to the program, eliminating the need for customers to manually adjust the position. 【Case Overview】 ■ Application: Long aluminum materials, aluminum sashes, etc. ■ Main Industries: Construction materials industry, etc. *For more details, please refer to the PDF document or feel free to contact us.
