Processing Equipment Product List and Ranking from 403 Manufacturers, Suppliers and Companies

Hypump Control (HPC) System (Water Supply)

It is also possible to reduce unnecessary wear on the water pump! Introducing the large-volume automatic supply system.

The "HPC System" is designed with multiple combinations of water pumps according to the water volume, and it controls the water pumps based on the usage amount. The control method detects flow rate and pressure to adjust the number of operating water pumps according to the usage amount. This prevents unnecessary electricity consumption by increasing or decreasing the operation of the water pumps. Additionally, it can reduce unnecessary wear on the water pumps, and it is cost-effective due to reduced maintenance and energy-saving operations. 【Features】 ■ Designed with multiple combinations of water pumps according to water volume ■ Controls water pumps based on usage amount ■ Increases or decreases the operation of water pumps to avoid unnecessary electricity consumption ■ Reduces maintenance ■ Energy-saving operation *For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

Water supply facilities
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Drainage pump/sweep pump (drainage)

If you want to lower the water level of drainage or make it as close to zero as possible, we introduce our pumps.

We would like to introduce the drainage pumps/sweep pumps that we handle. Drainage pumps can also be used as regular drainage pumps, but they are suitable for situations where you want to lower the water level further or bring it as close to zero as possible. The drainage water level can be reduced to approximately 1mm to 13mm. We offer models for both 100V and 200V, and we can also provide automatic drainage auto pumps. 【HSR-2.4S Specifications (Excerpt)】 ■ Output: 0.4kW ■ Phase/Voltage (Three-phase): Single 100V ■ Total lift: 10m ■ Discharge capacity: 0.05m3/min ■ Starting method: Capacitor operation *For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

Drainage and ventilation equipment
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Drainage hose nipple/connection fitting

Pump fittings JIS 10K flanges and jubilee bands! Strainers are also in the lineup.

We would like to introduce the hose nipples/connection parts that we handle. We offer a variety of hose nipples/connection parts, including pump nozzles JIS 10K flanges, hose nipples, S-1 nozzles, and Y-shaped strainers. The pump nozzle JIS 10K flange is available in sizes ranging from 40mm to 300mm. 【Product Lineup (Partial)】 ■ Pump nozzle JIS 10K flange ■ Pump S-I nozzle ■ Hose nipple ■ Elbow hose nipple ■ Nipple with JIS 10K flange *For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

Drainage material
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sand Separator "SC-40 Type" (Processing)

For the removal of sand from well water and the treatment of supply water for high-pressure cleaners! It demonstrates stable effects without hassle - sand removal by Recharge Well.

We would like to introduce the sand separator "SC-40 model" that we handle. It has a simple structure, is low-cost, requires little effort, and demonstrates stable effectiveness, making it possible to install even in narrow spaces. It can be used for sand removal from well water and for treating supply water for high-pressure washers. By recovering fine sand, it reduces wear on the washing machine and improves durability. 【Features】 ■ Simple structure ■ Low cost ■ Requires little effort and demonstrates stable effectiveness ■ Can be installed in narrow spaces *For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

Water Treatment
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tank with mixer (processing)

Tank models such as the 1MT type with a capacity of 1m3 in a round shape! A lineup of tanks with capacities ranging from 1m3 to 160m3 equipped with mixers.

We would like to introduce our "Tank with Stirrer." We offer a lineup of capacities ranging from 1m³ to 160m³, including models such as 1MT, 5MT, and 15MT. In the PDF document, you can view specifications including shape, dimensions, weight, and transport vehicles in the tank specification table. Please feel free to contact us when you need assistance. 【Partial Lineup】 ■1MT ■5AT ■5MT ■15MT ■25MT *For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

Water Treatment
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Corner tank / notch tank (processing)

A lineup of square tanks/notch tanks ranging from 1m³ to 5m³! The notch tank comes with two partitions.

We would like to introduce the "Corner Tank/Notch Tank" that we handle. We offer the new and conventional models of the 77m3 set and the 60m3 set. The notch tank comes with two partitions. The water tanks are available in four capacities: 5m3, 3m3, 2m3, and 1m3. Please feel free to contact us when you need assistance. 【Product Lineup】 ■ 77m3 Set ■ 60m3 Set ■ 58m3 Set ■ 30m3 Set ■ Water Tank ■ Notch Tank (with two partitions) *For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

Water Treatment
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Round assembly tank/vessel (processing)

Models TKK-260 and TKK-565 are available! Vessel offers a variety from 1m³ to 15m³.

We would like to introduce our "Round Assembly Tanks/Vessels." The round assembly tanks are available in five products ranging from 260m3 to 565m3. The vessels are available in various sizes from 1m3 to 15m3. In the PDF materials, you can view specifications such as shape, dimensions, weight, and transport vehicles. Please feel free to contact us when you need assistance. 【Round Assembly Tank Lineup】 ■TKK260 ■TKK330 ■TKK365 ■TKK450 ■TKK565 *For more details, please refer to the PDF materials or feel free to contact us.

Company：サンエー工業
Price：Other

Water Treatment
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sulfuric acid-based pH neutralization treatment system

TPC-12 type with a processing capacity of 10 to 30 m³/h and a raw water tank, along with the NT-20 type for pre-treatment with a processing capacity of 20 m³/h are included in the lineup.

We would like to introduce our "Dilute Sulfuric Acid pH Neutralization Treatment Device." The TPC-12 model employs a time-sharing proportional control method for pH control of raw water, allowing for stable and highly reliable treatment. Its compact and modular design makes it easy to install and move in confined spaces. The NT-20 model is a carbon dioxide method for treating turbid water and is used as a pre-treatment device to lower the pH value of raw water that has a high pH (above 10) to "below 10." 【Product Lineup】 ■ TPC-12 model (treatment capacity 10m3/h) ■ TPC-20 model (treatment capacity 20m3/h) ■ TPC-30 model (treatment capacity 30m3/h) *For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

Water Treatment
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Carbon dioxide gas pH neutralization treatment device

No assembly of equipment is required on-site, making installation easy! Comes with an automatic continuous recording device for effluent water pH values.

We would like to introduce our "Carbon Dioxide pH Neutralization Treatment Device." The Aqua Pet with a raw water tank is a unit type with a raw water tank and auxiliary reaction tank, requiring no assembly on-site. It comes with an automatic continuous recording device for the effluent pH value. Additionally, we offer the FOC-10 type with two carbon dioxide cylinder stands, the NT-35NB type with a 1m3 neutralization reaction tank, and the NL type vaporization device. 【Aqua Pet Optional Equipment】 ■ Sedimentation Tank Notch Tank 1m3 ■ Effluent Adjustment Tank 1m3 - various sizes ■ Drainage Pumps - various types ■ Carbon Dioxide Cylinder Stand *For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

Water Treatment Plant
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-high-speed granulation type wastewater treatment device

A lineup ranging from a processing capacity of 6m3/h to 120m3/h! Photos of the discharge conditions of SAF-type treated water are also included.

We would like to introduce our "Ultra-Fast Granulation Type Turbid Water Treatment Device." We offer models such as the SAF-1010 with a processing capacity of 6m³/h and the SAF-1015 with a capacity of 10-15m³/h. The EV-5S model (with press) has a processing capacity of 5m³/h. In the PDF materials, you can view installation examples of the SAF-6090 and PU-150 models, as well as the discharge conditions of the treated water from the SAF models. 【Product Lineup (Partial)】 ■SAF-1010 ■SSC-10C ■SAF-2025 ■SAF-3040 ■SAF-6090 *For more details, please refer to the PDF materials or feel free to contact us.

Company：サンエー工業
Price：Other

Water Treatment
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-low frequency reduction measures (processing)

Developed an inverse phase connection method (mechanical phase interference reduction method)! Developed a system to reduce noise.

We have developed a system to reduce the ultra-low frequency noise generated by the vibrating screen of the Sand Master (primary treatment machine) used in mud-water pressurized shield construction and continuous underground wall construction. Ultra-low frequency sounds, which are below 20Hz and typically inaudible to most people, can create a discomforting sensation of being pressed from the direction of the vibrating screen, depending on their intensity. When the sound pressure level exceeds approximately 85dB, the discomfort can intensify, although individual sensitivity may vary. Since its development, we have received numerous adoptions. 【Issues with Ultra-Low Frequency Noise】 ■ Ultra-low frequency sounds are below 20Hz and typically inaudible to most people. ■ There is a discomforting sensation of being pressed from the direction of the vibrating screen, which varies with intensity. ■ When the sound pressure level exceeds approximately 85dB, the discomfort can intensify, although individual sensitivity may vary. *For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

Water Treatment
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Soil Hopper "Low Head Hopper" (Processing)

Design can be customized based on the installation location and the amount of sediment stock! It is also effective against sediment blockage.

We would like to introduce our sand hopper, the "Low Head Hopper." Custom designs are possible depending on the installation location and the amount of sand stock. The opening gate is designed to be as large as possible, effectively preventing sand blockages. Please feel free to contact us when you need assistance. 【Capacity 100m3 Specifications】 ■ Power supply: 15kW ■ Dry weight: 27.5t ■ Transport vehicles ・ Large: 2 ・ 4t vehicle: 1 * For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

others
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sulfuric Acid Band-Type pH Neutralization Treatment Device "AST-0103 Model"

No qualification as a supervisor for handling specified chemical substances under the Labor Safety and Health Act is required! For pH treatment of cleaning water.

We would like to introduce the "Aqua Pet mini AST-0103 model" that we handle. This pH treatment device does not require the qualification of a specific chemical substance handling supervisor under the Labor Safety and Health Act, and it is capable of performing pH treatment using aluminum sulfate (sulfuric acid band) as a neutralizing agent. It is suitable for pH treatment of wash water containing cement that has adhered to boots, shovels, vibrators, leveling tools, etc., used at construction sites. 【Specifications (excerpt)】 ■ Neutralization method: 8% sulfuric acid band solution ■ Control method: ON-OFF control ■ Raw water pH: 13 or below ■ Treatment capacity: 1-3 m3/h ■ Injection amount: 1,000 ml/min (maximum) *For more details, please refer to the PDF materials or feel free to contact us.

Company：サンエー工業
Price：Other

Water Treatment
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Environmental protection-related equipment and treatment facilities

Select appropriate treatment methods according to harmful substances and respond appropriately! We protect the environment of the discharge destination!

Our company handles a variety of "environmental protection-related equipment and facilities." We neutralize and treat wastewater generated during the treatment of contaminated soil containing harmful substances from natural sources and former factory sites. Depending on the type of harmful substances, we select appropriate treatment methods such as neutralization, adsorption, coagulation and sedimentation, filtration, and chemical reactions to respond appropriately and protect the environment of the discharge destination. Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 ■ Dilute sulfuric acid neutralization treatment machine ■ Aeration blower ■ Stirring machine for reaction tank ■ Turbid water treatment machine ■ Fully automatic filtration device ■ Water quality monitoring panel *For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

Water Treatment Plant
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dirty Water Treatment Flow Diagram

Treating wastewater generated from construction work! We provide devices and technologies that enable the reuse of water for construction purposes.

We would like to introduce San-Ei Kogyo's turbid water treatment flow. In the turbid water treatment process, we provide equipment and technology that treat wastewater generated from construction work to a level of suspended solids (SS) of 25 mg/L and a pH value of 5.8 to 8.6, enabling "reuse for construction water" and "discharge into rivers and marine areas." Additionally, for the final stage of turbid water treatment, you can choose from multiple methods to ensure that the treated wastewater meets the discharge standards of the discharge destination. In the related catalog, we clearly present the turbid water treatment flow diagram along with product photos, so please download it and take a look. *For more details, please refer to the PDF materials or feel free to contact us.

Company：サンエー工業
Price：Other

Turbid water and muddy water treatment machines
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sludge Treatment Device "SJ Type Round Thickener"

No need for operational downtime for maintenance! Introducing the Sugijet high-speed coagulation and sedimentation device.

Our company handles the turbidity water treatment device "SJ Type Round Thickener." The "Sugi Jet" eliminates the need for both a stirrer and a sludge scraper (rake). The maturation and separation of flocs utilize the jet effect, fully leveraging the power of water itself. It offers advantages such as easy installation, low construction costs, a small equipment footprint, and ease of operation and management without failures. 【Features】 <Prevention of floc carryover> ■ The separation of flocs and purification in the separation chamber occurs in a three-dimensional flow. ■ Advantages: High water purification effect, high surface area load, and compact equipment. *For more details, please refer to the PDF document or feel free to contact us.

Company：サンエー工業
Price：Other

Waste treatment facilities
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powerful Aqua Cleaner "Fuma 8K"

Vacuum cleaning of residual water and sludge on concrete surfaces without leaving a drop behind!

The "Fuma 8K" is a versatile vacuum cleaner for water that continuously sucks up and drains water mixed with sediment and residual water. It can continuously suck up and drain both water and sludge from narrow areas where pumps cannot be used. It can also extract bottom water from deep, narrow reinforced concrete forms by extending a hose from the ground, making residual water treatment more efficient. Additionally, the separated sediment can be accumulated in a sludge bag for dehydration and removal. 【Features】 ■ Easy-to-use structure with fewer troubles ■ Collected sludge can be dehydrated and removed ■ Comfortable cleaning with regular inspections ■ Suitable for cleaning concrete surfaces ■ Water suction capacity of 210 l/min *For more details, please download the PDF or feel free to contact us.

Company：サンエー工業
Price：Other

pump
cleaning
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Roll-type scrap compression automatic processing machine "Omnipress"

Easy replacement of end materials! Hygienic and speedy, highly efficient compressor with complete automation.

The "Omnipress" is a roll-type waste compression automatic processing machine with an inlet size of 800 (L) × 560 (H) mm, allowing for relatively flexible input of the materials to be processed. The process of compressing the materials into rolls is fully automated. The compressed cylindrical bales are automatically packaged with PE film or PP netting. Made with reinforced steel slide chains, steel shafts for the roller body, and a total weight of approximately 875 kg, this product is exceptionally durable. 【Features】 ■ Inlet size is 800 (L) × 560 (H) mm ■ Allows for relatively flexible input of materials to be processed ■ The process of compressing materials into rolls is fully automated ■ Compressed cylindrical bales are automatically packaged with PE film or PP netting ■ Compatible with a variety of materials *For more details, please refer to the PDF document or feel free to contact us.

Company：日本包装機械本社
Price：Other

Packaging Machines
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ideal for compressing large objects! Roll-type scrap compression automatic processing machine.

Are you spending time and effort disposing of bulky transport materials? An automatic compression processing machine that contributes to reducing labor costs and improving operational efficiency.

The "Omnipress" is an automatic processing machine for compressing roll-shaped waste materials, allowing for relatively flexible input of the items to be processed. The process of pressing and shaping the materials into rolls is fully automated. The pressed cylindrical bales are automatically packaged in PE film or PP netting. 【Do you have any of these concerns?】 ■ Difficult disposal and handling of bulky transport materials ■ Challenging manual disposal due to large volumes 【Features】 ■ Hygienic and speedy ■ Relatively flexible input of the items to be processed ■ Fully automated operation ■ Pressed cylindrical bales are automatically packaged in PE film or PP netting ■ Compact design that fits easily in various locations *For more details, please refer to the PDF document or feel free to contact us.

Company：日本包装機械本社
Price：Other

Packaging Machines
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Satis Factory Inc. Company Information

A company that connects society 100 years into the future, solving environmental issues! Expanding the business chain and network to tackle social challenges.

Satis Factory Co., Ltd. is developing its business as an expert in waste management in Japan. We engage in waste management, environmental consulting, recycling product development, and environmental education. We carry out waste disposal, recycling, and resource circulation. We will reassess resource utilization, which is essential for achieving decarbonization and a circular economy. 【Business Activities】 ■ Waste Management ■ Environmental Consulting ■ Recycling Product Development ■ Environmental Education *For more details, please refer to the PDF materials or feel free to contact us.

Company：スタンダード石油大阪発売所
Price：Other

Other resource recycling
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Waste Treatment Machine "HURRY POD 3DX"

We contribute to the preservation of the global environment through the sale of non-combustible and non-fuel waste disposal equipment.

The "HURRY POD 3DX" is a waste processing machine that reduces waste volume from 1/300 to 1/400 without using fire or fuel, and without the need for sorting if it is organic material. Since it does not involve incineration, it does not produce harmful gases such as carbon dioxide or dioxins, making it an environmentally friendly product. Please feel free to contact us if you have any inquiries. 【Features】 ■ Simply input organic material (waste) as is ■ High volume reduction rate ■ Low running costs ■ Environmentally friendly processing residue *For more details, please download the PDF or feel free to contact us.

Company：ターニングポイント
Price：Other

Waste treatment facility
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Semiconductor device 'BATCHSPRAY Clean Autoload'

100% focus on BATCHSPRAY technology! Significantly reduces water, exhaust, and chemicals [Wet chemical equipment for the semiconductor industry] Fully automatic equipment.

This 4-chamber system is characterized by its ability to achieve excellent process results by combining mixed chemicals at the time of use with a patented retainer comb treatment system. By using SicOzone instead of peroxides or sulfuric acid for sustainable processes such as cleaning and resist stripping, it can reduce the consumption of chemicals and deionized water by up to 90%. 【Features】 ■ Throughput of up to 600 wph ■ Four process chambers ■ Installation area of less than 12 m² ■ Highly diluted disposable chemicals ■ No need for sulfuric acid or peroxides *For more details, please refer to the PDF document or feel free to contact us.

Company：Siconnex Japan(サイコネックスジャパン)
Price：Other

others
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wastewater Reuse Device "DiaFellow ZD"

We produce reclaimed water through multiple processing methods and do not discharge wastewater!

"DiaFellow ZD" is a wastewater reuse device that reduces environmental impact by not discharging wastewater into sewers or public water bodies, while also utilizing water resources. It reliably and stably treats wastewater using the MBR treatment method with Mitsubishi Chemical's hollow fiber membranes. This system achieves zero wastewater, complies with wastewater regulations, and purifies wastewater for reuse. 【Features】 ■ Zero Liquid Discharge (ZLD) ■ Stable operation ■ Compliance with wastewater regulations ■ Wastewater reuse *For more details, please refer to the PDF document or feel free to contact us.

Company：三菱ケミカルアクア・ソリューションズ排水処理事業部
Price：Other

Water Treatment Plant
Processing Equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Odor treatment method (EGSB - Methane fermentation)

Compared to aerobic treatment, the amount of excess sludge generated is less, leading to a reduction in sludge disposal costs and cost savings!

The "Anaerobic Treatment Method (EGSB and Methane Fermentation)" is a treatment method that decomposes organic matter in wastewater into methane and carbon dioxide through the action of anaerobic microorganisms. Under anaerobic conditions without oxygen, self-granulated carriers (granules) of anaerobic microorganisms are used, and through their metabolic activity, methane gas and carbon dioxide are generated from organic matter. The generated methane gas can be recovered as energy, and revenue from electricity sales can also be anticipated. 【Features】 ■ Energy-saving ■ Reduction of sludge disposal costs ■ Energy creation process ■ Reduction of installation space ■ Easy maintenance and management *For more details, please refer to the related links or feel free to contact us.

Company：三菱ケミカルアクア・ソリューションズ排水処理事業部
Price：Other

Drainage and ventilation equipment
Processing Equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Advanced Oxidation Process (AOP)

Decomposing and harmlessly treating difficult-to-decompose organic substances! We propose treatment methods tailored to the composition of wastewater.

The "Advanced Oxidation Process (AOP)" is a technology that actively utilizes hydroxyl radicals (OH radicals) generated through various means such as ozone and UV light to oxidatively remove organic substances contained in water. The characteristics of OH radicals (hydroxyl radicals) include high reactivity and oxidation power, allowing them to react with and treat most organic substances and reducing agents. It addresses difficult-to-treat, non-degradable organic substances such as dioxins and dioxane. 【Features】 - Decomposes non-degradable organic substances by combining ozone (O3) and hydrogen peroxide (H2O2). - Breaks down non-degradable organic substances into CO2 and H2O, rendering them harmless. - Offers broad applicability due to powerful treatment with OH radicals. *For more details, please refer to the related links or feel free to contact us.

Company：三菱ケミカルアクア・ソリューションズ排水処理事業部
Price：Other

Water treatment technology and systems
Drainage and water removal
Water Treatment
Processing Equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The concentrated bio liquid fertilizer that has successfully achieved 20 times concentration aims for sustainable circular agriculture.

A significant first step towards domestic production of organic fertilizers! The potential of concentrated bio liquid fertilizers.

Our agriculture supports our rich food life. To produce good crops, various factors such as weather and soil are important, but the choice of fertilizer is also a crucial point. Currently, Japan's agriculture relies entirely on imported chemical fertilizers, and due to the impacts of the COVID-19 pandemic and the invasion of Ukraine, prices have been soaring. In response to this situation, the Ministry of Agriculture, Forestry and Fisheries announced the "Green Food System Strategy" in 2021, aiming for a 30% reduction in the use of chemical fertilizers by 2050 and a target of 25% of farmland to be organic farming without chemical fertilizers. The "Concentrated Bio Liquid Fertilizer" introduced in this article is a significant first step towards domestic production of organic fertilizers. Therefore, we spoke about the details of the concentrated bio liquid fertilizer project and the potential it holds. *For detailed content of the interview, please refer to the related links. For more information, feel free to contact us.*

Company：三菱ケミカルアクア・ソリューションズ排水処理事業部
Price：Other

Fertilizers and Pesticides
Processing Equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thai three-piece fillet "FT-I"

The 8-blade design separates and cuts the vertical and middle bones, resulting in a yield close to hand-cutting!

At our business group, Firesta Sales Co., Ltd., we handle the 'FT-I' which is suitable for three-way filleting of fish. The power is 5.35 kW. The processing method uses 8 circular blades. The dimensions that can be processed are 70 mm in width and 200 mm in height. The processing capacity is 20 fish per minute. The size is 2320L × 1350W × 1840H. The 8-blade system separates the backbone and the middle bone, resulting in a yield close to hand-cutting. 【Specifications】 ■ Power: 5.35 kW ■ Processing method: 8 circular blades ■ Processable dimensions: Width 70 mm, Height 200 mm ■ Processing capacity: 20 fish per minute ■ Size: 2320L × 1350W × 1840H *For more details, please download the PDF or feel free to contact us.

Company：日本製造
Price：Other

others
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Salmon line

Scales removal, filleting, head cutting, etc. are possible! Equipped with a knife sharpening mechanism.

We would like to introduce the "Salmon Line" handled by our business group, Filesta Sales Co., Ltd. It is equipped with functions such as scale removal, filleting, head cutting, pin bone removal, and skinning. It also features a knife sharpening mechanism. Filesta Sales Co., Ltd. contributes to food culture and the seafood industry through the sale and maintenance of various fish processing machinery. 【Processing Functions】 ■ Scale Removal ■ Filleting ■ Head Cutting ■ Pin Bone Removal ■ Skinning *For more details, please download the PDF or feel free to contact us.

Company：日本製造
Price：Other

others
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Skinner "FTH-40"

The new technology of the pressing conveyor allows for simultaneous processing of horse mackerel and their scales, resulting in a beautiful finish!

At our business group, Firesta Sales Co., Ltd., we handle the Skinner 'FTH-40'. It is a device that ensures safety, hygiene, high-speed processing, and is suitable for various fish species. With the new technology of the pressing conveyor, it can beautifully process horse mackerel and other fish simultaneously. It allows for ultra-thin peeling that leaves the silver skin intact. The processing capacity is 50 to 80 fish per minute, with a cutting effective width of 350mm. The exterior is primarily made of stainless steel, with some parts made of plastic. 【Supported Fish Species】 ■ Horse Mackerel ■ Mackerel ■ Pacific Saury ■ Sardines, etc. *For more details, please download the PDF or feel free to contact us.

Company：日本製造
Price：Other

others
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Construction Machinery Attachment Rotary Screen RS Series

Ideal for removing and sorting soil and debris! The screen rotation speed can be freely adjusted.

The Rotary Screen RS Series is ideal for the removal and separation of soil and debris. The sides of the screen are also mesh, which increases the workload. The rotation speed of the screen can be freely adjusted. Standard equipment includes teeth to facilitate scooping. A side cutter is also available as an option. With the ability to rotate both forwards and backwards, sorting is easy. Models include the "RS-12" for 10-16 ton class excavators, the "RS-20B" for 17-21 ton class, and the "RS-30" for 29-38 ton class. For more details, please contact us or refer to the catalog.

Company：日本ニューマチック工業
Price：Other

others
Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Processing Equipment Product List and Ranking from 403 Manufacturers, Suppliers and Companies | IPROS

Processing Equipment Manufacturer, Suppliers and Company Rankings

Processing Equipment Product ranking