Meter×株式会社テクトロニクス＆フルーク - List of Manufacturers, Suppliers, Companies and Products

Meter Product List

1～9 item / All 9 items

Displayed results
Illuminance Meter | Fluke IRR1-SOL Solar Radiation Illuminance Meter

Illuminance Meter | Fluke IRR1-SOL Solar Radiation Illuminance Meter

With one tool, you can easily install, test, maintain, and measure solar panels and photovoltaic systems.

The Fluke FLK-IRR1-SOL solar radiation intensity meter allows you to perform all four essential measurements in a single user-friendly tool when investigating, installing, maintaining, and checking the performance of solar panels and photovoltaic systems. It instantly measures the solar irradiance in watts per square meter as required by the IEC 62446-1 standard. You can place the meter directly on the panel or connect an external probe to measure temperature. Use the compass to check the direction and the tilt function to verify the slope of the roof or panel. It can carry out all the critical measurements necessary for the installation and verification of solar power systems. Additionally, it also provides reports on the performance of solar power systems. Key Features: - Measures solar radiation intensity, ambient temperature, PV module temperature, array orientation, and tilt angle - Instantly measures solar irradiance in watts per square meter as required by the IEC 62446-1 standard - Equipped with a large display and high-contrast LCD for readability even in direct sunlight - Comes with a convenient carry case with a shoulder strap

  • Other measuring instruments
  • Environmental Survey
  • Weather Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital Multimeter | Fluke 117 (Commercial Use)

Digital Multimeter | Fluke 117 (Commercial Use)

It is optimized to assist in the proper operation of commercial buildings, hospitals, and schools.

The Fluke 117 features a built-in non-contact voltage detection function that helps identify circuits with voltage applied. Additionally, the AutoV/LoZ function prevents erroneous readings caused by ghost voltage. The Fluke 117 displays True-rms AC voltage/current readings with a resolution of 6000 counts. Minimum/maximum/average readings are shown, and frequency and capacitance are measured. The battery compartment cover is positioned for easy access, allowing for continued work without interruption. The Fluke 117 multimeter has been independently tested for safe use in CAT III 600V environments. *For more details, please refer to the external link or feel free to contact us.*

  • others
  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital Thermometer | "Stik" Thermometer 155X

Digital Thermometer | "Stik" Thermometer 155X

As a standard thermometer to replace mercury thermometers, which are being criticized for their impact on the human body and the environment.

The 1551A/1552A is a thermometer that will become the new "golden standard" for industrial temperature calibration. It can be used as a reference thermometer to replace mercury thermometers, which are being scrutinized for their impact on human health and the environment. Some digital thermometers can only provide accurate measurements within a narrow range of environmental temperatures, and using them outside of that range can lead to poor accuracy. However, the "Stik" thermometer can provide accurate measurements in environmental temperatures ranging from -10 ˚C to 50 ˚C. Not only is it safer and more durable than mercury thermometers, but it also offers high precision with an accuracy of ±0.05 ˚C across the entire range, making the 1551A/1552A an ideal new reference thermometer.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Indoor Air Quality Meter | Fluke 922 Air Flow Meter

Indoor Air Quality Meter | Fluke 922 Air Flow Meter

Consolidating the functions of atmospheric pressure, airflow, and wind speed measurement into a single robust measuring device.

The Fluke 922 is compatible with most pitot tubes, allowing you to input the shape and dimensions of the duct for measurements with maximum accuracy.

  • Anemometer
  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Clamp Meter | Fluke 381

Clamp Meter | Fluke 381

It has become possible to place the magnetic display away from the measurement point, improving flexibility without compromising measurement accuracy.

■ Wireless technology allows the display to be placed 9 meters away from the measurement point, enhancing flexibility without compromising measurement accuracy. ■ The display can be easily attached and detached using magnets, making it convenient when needed. ■ Using the iFlex flexible current probe expands the measurement range up to 2500 A AC. ■ CAT IV 600 V, CAT III 1000 V. ■ Integrated low-pass filter and advanced signal processing enable use in noisy electrical environments, providing stable readings. ■ Patented inrush current measurement technology removes noise and captures motor starting current simultaneously with circuit protection detection. ■ The ergonomic design fits comfortably in the hand, allowing operation even while wearing protective gear. ■ The appropriate measurement range is automatically set by the wireless transmitter, eliminating the need to change switch positions during measurement. ■ 3-year warranty. ■ Soft carrying case.

  • Measurement and Inspection
  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Industrial Multimeter | Fluke 87 V

Industrial Multimeter | Fluke 87 V

With a limited lifetime warranty, work becomes more convenient, faster, and safer!

The "Fluke 87 V" is a highly regarded industrial multimeter, from the control room to the factory floor. When productivity is at risk, using this product provides accurate and advanced troubleshooting capabilities, helping to resolve issues quickly. To accurately measure voltage and frequency in electrically noisy equipment, such as speed-adjustable motor drives, the low-pass filter function is utilized. The peak capture function detects intermittent problems and transients in 250 microseconds. 【Features】 ■ Provides advanced troubleshooting capabilities ■ Helps to resolve issues quickly ■ Uses peak capture function to detect intermittent problems and transients in 250 microseconds ■ Withstands impulses over 8,000 V ■ Reduces risks associated with surges and spikes *For more details, please refer to the external link or feel free to contact us.

  • others
  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital Multimeter | Fluke 179

Digital Multimeter | Fluke 179

The true effective value multimeter chosen by expert technicians around the world.

The Fluke 170 series True-rms digital multimeters are chosen by professional technicians around the world for their accuracy, reliability, and ease of use. This product is an industry standard and is equipped with all the functions necessary to troubleshoot and repair a wide range of issues found in electrical and electronic devices. The Fluke 170 series digital multimeters feature True-rms voltage and current measurements, 6000 count resolution, and both manual and automatic range settings. They also allow for frequency, capacitance, resistance, continuity, and diode measurements. Additionally, the Fluke 177 and 179 models offer a higher basic accuracy of 0.09%, and a backlit digital display capable of showing an analog bar graph. The Fluke 179 also allows for temperature measurements. *For more details, please refer to the external link or feel free to contact us.*

  • others
  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital Multimeter | Fluke 115

Digital Multimeter | Fluke 115

Its compact design and ease of use make it suitable for quick verification and field service applications.

The Fluke 115 True RMS Digital Multimeter delivers excellent performance for general electrical/electronic testing requirements. Its simple operation, compact design, and ease of use make it ideal for quick verification and field service applications. The Fluke 115 displays True RMS readings of voltage/current with a resolution of 6,000 counts, tests diodes, frequency, continuity, and capacitance, and shows minimum/maximum/average readings to record signal fluctuations. The large white LED backlight is helpful for working in dimly lit conditions. The battery compartment cover is easy to open, making battery replacement simple. The Fluke 115 multimeter has been independently tested for safe use in CAT III 600V environments. *For more details, please refer to the external link or feel free to contact us.*

  • others
  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Clamp Meter | Fluke 393 FC CAT III

Clamp Meter | Fluke 393 FC CAT III

The world's only CAT III 1500 V current clamp.

The 393 FC CAT III 1500 V True-rms Clamp Meter (with iFlex use) is designed for technicians working in high-voltage DC environments (such as solar power, wind power, railways, and continuous power supply to data center battery banks). The clamp jaws allow for measurements of up to 1500 V DC, 1000 V AC, and a maximum of 999.9 A (DC or AC). The included iFlex flexible current probe extends AC current measurements up to 2500 A. The clamp features slim jaws that provide access to cables in narrow combiner boxes. The test leads are designed with practical work in mind and comply with CAT III 1500 V DC standards.

  • Measurement and Inspection
  • Other measuring instruments
  • Power and Energy Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Meter

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.