Last Updated： Aggregation Period:Dec 03, 2025～Dec 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 03, 2025～Dec 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 03, 2025～Dec 30, 2025
This ranking is based on the number of page views on our site.
346～360 item / All 1574 items
This is an easy-to-use domestic water leak detection device that combines a newly developed compact high-performance microphone with a higher-end digital amplifier.
It is equipped with a microprocessor that automatically eliminates noise.
It is possible to easily and reliably identify terminal devices and intermediate cables without being affected at all by digital lines or inverter noise.
The transmitter can be connected to any type of wire (0–600VAC/DC) and employs a unique transmission method that supplies or induces very weak induced currents depending on the condition of the wire. Additionally, the receiver automatically identifies only the signals generated by the transmitter using an internal microprocessor, significantly improving the operability and reliability of cable tracing tasks. Most cable tracing methods are based on the detection of a single induced wave, but generally, this results in receiving noise components within that frequency as signals, leading to uncertainty in identifying cables and terminal equipment, which can result in misdiagnosis. The onboard poly-signal composite detection method makes it impossible for other frequencies and noise components to interfere by superimposing four synthesized signals onto the carrier frequency, making cable tracing tasks reliable and easy.
The 501 is a buried cable locator of the basic model with standard features.
It is possible to detect the position and depth of power, high pressure, communication, and control lines.
This is a dedicated model for measuring light wind speed, a single-function anemometer. Measurement range: wind speed 0.05 to 2.00 m/s (1 range).
Simultaneous analog output is also possible, allowing for a wide range of applications beyond just air conditioning. *Please note that this product requires adjustment in combination with the main unit when replacing the sensor (considered a repair). An additional adjustment fee will be required on top of the price for the sensor probe alone.*
We have four types: 2, 5, 10, and 20 kilograms (each with certified products available).
The weighing capacity comes in four types: 2, 5, 10, and 20 kilograms, and there are also certified versions available. An AC adapter can be used as an option. *Please choose from the weighing capacities of 2, 5, 10, and 20 kg (each available with or without certification). This device has received type approval. *When ordering the certified version, please inform us of your region. (This is necessary for gravity correction.)
It is easy to separate from the display section with certification.
It supports a 3-way power supply of rechargeable battery, AC adapter, and dry batteries (dry batteries are not included). *This device has received type approval.* *Please choose the type according to your needs.* - PB-30 (capacity 15/30kg) - PB-60 (capacity 30/60kg) - PB-150 (capacity 60/150kg)
This is a soot concentration meter that evaluates the smoke density of flue gas and checks combustion efficiency.
By drawing in combustion exhaust gases, we compare the smoke and smoke scale adhered to the filter paper to determine the smoke level. It can be used with all oil burners and can accurately measure the smoke level within one minute. It is widely accepted as a world standard method for smoke testing of oil burners and has gained trust through years of proven performance in the burner industry.
In addition to measuring the absorbance of nitrogen, phosphorus, etc., pH (electrode type) and turbidity can also be measured.
It is a spectrophotometer that excels in accuracy and reproducibility, and is easy to operate.
It is a simple and easy-to-operate machine control system that improves efficiency in tasks such as excavation work.
It is used by attaching it to the blade of heavy machinery such as bulldozers and combining it with a rotating laser level. *Please note that the rotating laser level SLH-600 with slope setting function is required for use. Please select it together.
It is a small handheld digital thermometer and hygrometer.
With the maximum/minimum/hold function, it is possible to display only the highest and lowest values during measurement and to hold the displayed values. It features a backlight display function, allowing measurement values to be displayed even in dark places, making measurements in low-light conditions possible. It is portable and high-performance, designed for use by both technicians and the general public.
This is a digital thermometer and hygrometer that can measure and display temperature, humidity, dew point temperature, and wet bulb temperature.
The DT-321S is a temperature and humidity sensor that uses a state-of-the-art digital output single-chip relative humidity and temperature sensor module, allowing for quick measurement of humidity and temperature in just 10 seconds. It features maximum, minimum, and hold functions, enabling the display of only the highest or lowest values during measurement and the ability to hold the displayed values. Additionally, it has a backlight display function, making it easy to read measurements even in dark environments. It is recommended for use in laboratories, factories, and by technicians and professionals.
This is a high-precision multifunctional thermometer and hygrometer that can measure temperature, humidity, dew point temperature, and atmospheric pressure all in one device.
The PHB-318 uses the latest resistive humidity and semiconductor sensors, allowing for quick display of humidity and temperature. It automatically calculates and displays the dew point temperature based on the temperature and humidity. Additionally, it features a hold function for measurement values and memory functions for maximum (MAX) and minimum (MIN) values, along with an automatic shut-off function.
It is a digital thermometer and hygrometer that can communicate with a computer and exchange data.
This is a digital thermometer and hygrometer with a data logger function that allows data communication with a computer using the included RS232C cable and analysis software. The CENTER313 has a memory capacity of 16,000 (for each channel), enabling it to automatically record temperature, humidity, and measurement dates over long periods. The measurement interval can be set between 1 second and 59 minutes, allowing real-time data transfer of time and temperature/humidity data to a computer during measurement. The measurement data can be saved in Excel or text file formats, facilitating temperature and humidity analysis and evaluation. The CENTER313 also features a hold function for measurement values and memory functions for maximum (MAX) and minimum (MIN) values, along with a clock function. It includes a temperature and humidity calibration function, and humidity calibration can be performed using optional humidity standard liquids (33% and 75% humidity). The CENTER 313 comes packaged in a hard case along with the analysis software, communication cable, battery, and operation manual.
It is a data logger multi-water quality measurement device equipped with an SD slot.
You can measure conductivity, TDS, and salinity levels. By simply transferring the included 1G SD card to your computer, you can edit the data in Excel. It features a data hold function and Max/Min display function for ease of use. Additionally, it has a backlight, making it convenient for measurements in dark places.
There is a very high correlation between the measurement values according to the JIS method and the wastewater from various business establishments.
This measurement method maintains the reaction conditions between the pollutants and potassium permanganate identical to JIS K 0102, using one-twentieth of the liquid volumes of the sample and reagents as per the JIS method. Heating at 100°C for 30 minutes is conducted using a reactor instead of a water bath, and the amount of consumed permanganate ions is determined by measuring the decrease in absorbance with a photoLab 6100 water quality meter, which displays the COD concentration. Since the reaction conditions of this method are exactly the same as those of the JIS method, there is a very high correlation between the measurements obtained by the JIS method and those obtained using the photoLab 6100.
