Machining Product List and Ranking from 52 Manufacturers, Suppliers and Companies

[Case Study] Inserting an Elastomer Tube into a Pipe

We solve the problem of 'the tube is too tight and cannot be easily inserted into the pipe!'

We would like to introduce a case where an elastomer tube was inserted into a pipe. Our company can solve the problem of "the tube being too tight to easily insert into the pipe." By carefully considering the points below during the process, it is possible to insert a tight tube into a pipe with double-sided tape. As a result, the pipe and tube are securely fixed and safe. 【Important Points】 ■ The tube should be warmed. ■ The double-sided tape should be moistened with a special solvent. ■ Air should be blown in during insertion to slightly inflate the tube while inserting it all at once. ★ Our company is prepared to address challenges that others cannot handle to the best of our ability. If you have any other concerns, please feel free to contact us.

Company：テクノタイヨー
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flexible response with high-level integrated production including processing and assembly QCD up to finished products.

For those struggling with selecting a processing method! We can flexibly respond to your requests and needs.

Are you having trouble selecting a manufacturing method? We can propose suitable solutions. Our in-house factory offers a consistent production and contract development service. We can flexibly respond to your requests and needs with high-level integrated production in terms of quality, cost, and delivery time, covering not only processing but also assembly up to finished products. We have a domestic network that collaborates with partner companies possessing abundant know-how to meet various needs, and we source a wide range of cast and molded products, as well as processed goods, from local suppliers in Vietnam, Taiwan, and China. 【Features】 ■ In-house factory: Providing consistent production and contract development services ■ Domestic network: Collaborating with partner companies with rich know-how to meet various needs ■ Vietnam: Wire rods / Aluminum / Iron / Lost wax / Die casting / … *For more details, please refer to the PDF document or feel free to contact us.

Company：テクノタイヨー
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Machining

You can freely cut shapes in 2D and 3D.

Boards up to 3100mm × 1300mm can be cut into any shape. Capabilities: - Cutting - Window opening - Notching - Step cutting - Counterboring - Drilling - Chamfering

Company：トマト工業
Price：Less than 10,000 yen

Synthetic Resin Plywood
Machining

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Numerous case studies of plastic machining: Available for orders starting from one piece.

CNC machining is not just for metals! Download a collection of case studies on plastic machining!

Plastic can also be machined! When it comes to machining, it is often thought of as a method for processing metals, but in fact, machining is also possible with plastics. Machining is a processing method that involves cutting and shaping materials like plastic using cutting tools. While the primary focus is on machining sheet-shaped materials on a flat surface, decorative treatments can also be applied through printing or vapor deposition. Additionally, functional enhancements such as hard coatings and AR coatings are possible. Our Strengths Our company has a large number of machines, allowing us to handle a wide range of sizes and quantities, from large to small and from few to many. Due to our stable quality, we are also utilized in medical and educational fields, as well as in measuring instruments for astrophysics. Furthermore, we have a proven track record in processing various plastics, including PMMA and PC, so we believe we can meet a variety of requests. Please feel free to contact us for more detailed information. *You can immediately check our processing examples via 'PDF Download.' For any other inquiries or to discuss prototypes, please contact us.

Company：太陽精工
Price：Other

Glass Decoration Materials
Lighting
Office furniture
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass epoxy machining

Supports precision machining of difficult-to-cut materials! Machining of thermosetting resins capable of engraving characters, logos, etc.

Yumex specializes in the processing of glass epoxy and galepoxy (thermosetting resin). We can perform various surface treatments, including surface polishing, moisture-proof treatment, varnish treatment, and sandblasting. We also offer press processing, and if you require thin materials in large quantities, we can propose press molds. We accommodate large sizes and accept orders starting from one piece, so please feel free to contact us for a quote. 【Features】 ■ Processing such as holes on the sides is possible ■ Production of jigs using galepoxy (transitioning from metal to resin) ■ Engraving of letters, logos, etc. is possible ■ Large size support ・MC: 1080×550 size ・Router: 995×995 size *For more details, please refer to the PDF document or feel free to contact us.

Company：ユメックス
Price：Other

others
Machining

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

BTI Corporation Q&A

"What kind of processing can be done?" Introduction to FAQs of BTI Corporation.

BTI Corporation offers a variety of equipment, including NC lathes and machining centers, and provides precision cutting services that cater to a wide range of needs, from small quantities of diverse products to mass production. We would like to introduce BTI Corporation in a Q&A format. 【Overview】 ○ What types of processing can you perform? ○ What is the maximum size for processing? ○ What is the level of processing accuracy? ○ What is the shortest delivery time? ○ Can you provide advice on suitable materials and shapes? And more. For more details, please contact us or download the catalog.

Company：ビー・ティ・アイ
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Would you like to reduce costs and weight for resin cutting processed mechanical components?

We solve problems with resin processed products to reduce costs, lighten weight, and improve performance! *Plastic property tables available.

BTI Corporation has a proven track record in high-precision 3D machining for parts used in food machinery and semiconductor equipment, and also performs groove cutting for spindle bearings (urethane) used in wire saws that cut ingots for semiconductors and solar cells. By replacing parts that were previously made of metal with plastic, there are various advantages. 【Advantages of Switching to Resin Machined Parts】 - Easy to process, leading to cost reduction - Lightweight, with a specific gravity of about 1/6 that of metal - Excellent water resistance and chemical resistance, does not rust - Can be made to have insulating or conductive properties We are currently offering a property table for various types of plastics. For more details, please contact us or download the PDF.

Company：ビー・ティ・アイ
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mitsuboshi Production Co., Ltd. Business Introduction

With a three-dimensional measuring device, we can accommodate more advanced and precise products.

【Content of Publication - For more details, please refer to the catalog.】 Mitsuboshi Seisaku Co., Ltd. is continuously making unrelenting efforts to meet our customers' needs. We strive for meticulousness and quality in each of our products, working hard to provide prices and value that satisfy our customers. We aim to be a cutting manufacturer that can satisfy our customers with even higher technical capabilities and products with added value. 【Business Activities】 ○ Metal Processing Turning, Milling, Machining Grinding (Flat Grinding), Welding (TIG Welding) For more details, please contact us or download the catalog.

Company：三ツ星製作
Price：Other

Miscellaneous metal items
others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shiyama Screw Co., Ltd. Business Introduction

We aim to be used like a convenient in-house factory for our customers.

Shiyama Screw Co., Ltd. is a company engaged in precision machining of mechanical parts, manufacturing and selling various screws, and screw rolling processing. We have a variety of machines prepared to aim for "a department store rather than a specialty store." In addition to five-sided machining machines, we have complex NC lathes, machining centers, automatic NC lathes with bar feeders, and a total of 30 other machines, along with various measuring instruments including three-dimensional measuring devices to ensure quality assurance. All our employees are looking forward to your inquiries. 【Product Line】 ○ Precision machining of mechanical parts ○ Manufacturing and selling various screws ○ Screw rolling processing For more details, please contact us or download our catalog.

Company：石山ネジ横浜工場
Price：Other

Joints between components
Miscellaneous metal items
Metalwork
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Japan Tsukuridas Company Profile

Japan Tsukuridas is a company that "creates things" and "supports companies that create things."

Nihon Tsukuridasu Co., Ltd. is a manufacturing service company. We act as a bridge connecting Japanese manufacturing by providing maximum benefits to both manufacturers and small factories. In addition to our core manufacturing and processing divisions, we have launched as a trading company that offers all the necessary services for everyone involved in manufacturing to ensure their comfort, including website attraction for manufacturing, customer response methods, data management, and utilization know-how. 【Business Overview】 ○ Machinery Business ○ BMS Business ○ Software Development Business ○ Development Support Business For more details, please contact us or download the catalog.

Company：日本ツクリダス
Price：Other

Construction and process management software
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Leave the production and processing of parts to us! Welding, sheet metal processing, and machining.

We manufacture industrial machine parts and inspection equipment, produce precision sheet metal processing parts and cutting processed parts, and perform vacuum airtight welding.

Our specialized welding technology accommodates precision sheet metal manufacturing, machining, and more, without limitations on materials or shapes. Additionally, we provide comprehensive support from equipment design, system development, wiring, assembly, and installation to procurement of components, as well as commissioned and modified designs. Furthermore, we offer a wide range of services from the manufacturing of vacuum equipment and parts to leak testing of vacuum devices through helium leak testing. 【Business Activities】 ■ Design and manufacturing of general industrial machinery, various automation and labor-saving devices, and inspection equipment ■ Design and manufacturing of vacuum-related equipment, devices, and parts ■ Manufacturing of precision sheet metal processed parts and machined parts ■ General assembly, adjustment, transportation, and installation work of devices and units *For more details, please refer to the PDF materials or feel free to contact us.

Company：北村鉄工所
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Machining

In addition to resin materials, we also accommodate various metals such as aluminum, brass, and magnesium!

"Cutting processing" allows for production with actual materials and is suitable for confirming functionality and durability. It is a method with high dimensional accuracy and shape reproducibility. It accommodates various metals, including resin materials, aluminum, brass, magnesium, stainless steel, and iron. As post-processing, we offer various decorative treatments such as painting, silk printing, vapor deposition, and plating, as well as processing like insert nuts and tapping. [Features] - High dimensional accuracy and shape reproducibility - Possible production with actual materials - Suitable for confirming functionality and durability *For more details, please refer to the related link page or feel free to contact us.

Company：エムトピア
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting and processing all materials.

Manufacturing of industrial prototypes made from various materials, including plastic (resin), single-item processed products (aluminum prototypes, plastic prototypes, resin prototypes, rubber prototypes).

We can handle everything from prototype machining of soft rubber, elastomers, urethane, and silicone to prototype molding of various types of plastics (resins, general-purpose plastics, engineering plastics, super engineering plastics), non-ferrous lightweight metal materials, and die-cast materials (such as magnesium, zinc die-cast, and aluminum).

Company：ケイズモデルプラスチック（樹脂）・ゴム・アルミ（試作単品短納期加工・CAD/CAM)大阪工場
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Response capability of acrylic and polycarbonate cutting processing!

Mass production of large products is possible with multi-axis machining! Orders from 1 to over 1 million pieces are also accommodated!

Our company, as a plastic machining manufacturer, is involved in a wide range of fields including industrial equipment, plant equipment, and scientific instruments. We can respond to orders from 1 to over 1 million units with the shortest delivery times thanks to our production system and processing equipment. 【Features】 - We have both a general department and a mass production department, allowing for quick responses tailored to the order quantity. - We can mass-produce large products using one of the largest multi-axis machining centers in the Kansai region. - Continuous operation is possible with a 24-hour system. - Maximum simultaneous processing of 6 axes at 1500mm. *For more details, please refer to the PDF document or feel free to contact us.

Company：マーク工業
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting processing of 10mm thick acrylic (PMMA)

Acrylic processing with mirror finish is possible! Ideal for producing parts used in lighting covers!

At Mark Industrial Co., Ltd., we perform machining of acrylic (PMMA) with a thickness of 10mm. We use special tools that provide a mirror finish on the machined surface to manufacture parts used for lighting covers. With years of experience in resin processing, we sincerely respond to our customers' requests, and acrylic processing is particularly one of our specialties. 【Features】 ■ We process various resin-based components. ■ We excel in mirror finishing of acrylic. ■ NC machining of 10mm thick transparent acrylic material is possible. ■ We use special tools called single crystal diamond tools that provide a mirror finish on the machined surface. *For more details, please refer to the PDF document or feel free to contact us.

Company：マーク工業
Price：Other

Other lighting fixtures
others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mass production cutting processing of 2mm thick acrylic (PMMA)

Reduce costs with NC multi-axis machining! A must-see for those looking for a plastic processing manufacturer (prototype and mass production).

At Mark Industrial Co., Ltd., we process various resin components. With years of experience in resin processing, we sincerely respond to our customers' requests from cutting, NC processing, printing, to assembly. We particularly excel in acrylic processing, and we can manufacture items such as diffusion panels used as power indicator lamps. By performing NC multi-axis processing in-house, we keep costs down and can process 100 products from a single sheet of material. If you are looking for a plastic processing manufacturer (for prototypes or mass production), please feel free to contact us. 【Features】 ■ Cost reduction is possible through in-house NC multi-axis processing ■ Processing of 100 products from a single sheet of material ■ Clean and ship while 100 pieces are still attached to the sheet *For more details, please refer to the PDF document or feel free to contact us.

Company：マーク工業
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Casting processing examples: Aluminum/Iron/Stainless Steel Body

We would like to introduce a case study of processing "bodies" for pneumatic parts used in commercial vehicle brakes. Leave precision casting and machining to us!

Our company performs lathe machining, machining, and impregnation treatment for pneumatic parts "BODY" for commercial vehicle brakes. With the motto of "Creating Trusted Products," we respond to our customers' strong trust based on the technical skills we have cultivated since our establishment and our state-of-the-art equipment. You can rely on us for precision cast machining! 【Overview】 ■ Industry Classification: Pneumatic Parts for Commercial Vehicle Brakes ■ Part Name: BODY ■ Material: Aluminum Die Casting (ADC12) ■ Processing Methods: Lathe Machining, Machining, Impregnation Treatment ■ Product Features: Six-sided machining, no pinholes on the seating surface, small quantities of various types *For more details, please refer to the PDF document or feel free to contact us.

Company：須藤機械
Price：Other

Casting and metal decoration
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Processing Example] Impeller Turbine Blade

It was machined using a 5-axis machining center.

We would like to introduce a processing example of the "Impeller" manufactured by Iida Manufacturing. An impeller is a rotating blade that moves fluids. When the impeller rotates, it generates the force to transport liquids and gases. A common example in our daily lives is the open-type impeller used in washing machines and exhaust fans. Plastic impellers are lighter and more corrosion-resistant compared to metal ones, and they have durability without embrittlement in various environments. *For more details, please refer to the PDF document or feel free to contact us.

Company：飯田製作所福島第2工場
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

If you're struggling with parts processing! We can help reduce costs [Special Precision Parts Processing]

We will achieve cost reduction for various precision parts processing such as difficult-to-cut materials, lathe processing, machining, press processing, and forging!

Our company has over 100 partner factories, and we respond to various customer requests based on the drawings provided, focusing on quality, precision, and cost performance. We flexibly handle machining of difficult materials such as aluminum, brass, titanium, and Inconel, as well as cutting processes from small lots to mass production. Please feel free to consult us about any matters regarding quality, lot size, dimensions, delivery times, etc. Additionally, we also handle our own products such as high-lock nuts and high-lock ads, so please do not hesitate to contact us if you have any requests. 【Features】 ■ Difficult-to-machine materials → Aluminum, brass, titanium, Inconel, etc. ■ Lathe processing → Supports small lots to mass production ■ Machining center From 2-axis control to multi-axis control! ■ Press processing We propose optimal processing from single-type presses to progressive presses ■ Forging processing Capable of handling complex shapes! *For more details, please refer to the PDF document or feel free to contact us.

Company：三木製作所
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

We can also handle rubber cutting and three-dimensional processing. (Data provided)

We can also handle rubber cutting and three-dimensional processing (data provided). Due to the characteristics of the material, we will strive to meet your requirements for tolerances and distortions as closely as possible.

At Takimoto Giken Kogyo Co., Ltd., we can handle rubber cutting and three-dimensional processing. (Data provision) Rubber processing may have issues such as machine tolerances not being met or burrs appearing, so discussions are necessary. For industrial machinery related to the automotive sector, there are various shapes for workpieces depending on the design, but we can get as close to your requirements as possible through machining. We perform 3D machining by creating 3D data from drawings using CADCAM. (If you have 3D data, please provide it.) We can also produce small lots, starting from just one piece. We can accommodate repeat orders from single items as well. For companies, we strive to flexibly respond to various conditions and meet diverse requests, such as payment terms or the absence of drawings. We have been in operation since our founding in 1971. We deeply appreciate the support of our users, which has made this possible. We look forward to your continued patronage. *For more details, please refer to the PDF materials or feel free to contact us.

Company：滝本技研工業
Price：10,000 yen-100,000 yen

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

NC Cutting Processing: Thin Film Processing Technology

Short delivery response! High-precision machining utilizing NC cutting technology is possible.

Our company is capable of high-precision processing of thin film with a thickness of 0.025mm or more using NC cutting, while minimizing burrs. Through our network of cooperative processing manufacturers, we can provide cost-effective solutions, accommodating everything from prototypes to mass production of punched parts. Please feel free to contact us when you need our services. 【Advantages of NC Cutting Processing】 - No need for molds during prototyping, reducing initial costs - No need to remake molds in case of design changes - High precision processing ±0.05 - Short delivery times *For more details, please refer to the PDF document or feel free to contact us.

Company：メイテックジャパン
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Cutting Process] It cuts. It is cut.

Introducing jobs in cutting machining! An explanation of processing machines, costs, and quality assurance.

When you hear about a factory for car and motorcycle parts, what comes to mind? You might picture parts being placed on a conveyor belt, with robots diligently working away. Or perhaps you envision large machines lined up neatly in a spacious factory, all engaged in production. However, our company is not a mass production factory. But we do manufacture parts for cars and motorcycles. *For more details, please refer to the related links. For further information, please check the PDF materials or feel free to contact us.*

Company：橋本エンジニアリング
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting processing <Aichi Prefecture support>

Years of cultivated plastic cutting technology! We also accept inquiries for prototypes before mass production.

Our company offers customization to meet customer needs for hard plastic pressing, cutting, and slicing. We have a wide range of machining centers, including the FANUC ROBODRILL α-DiB series, capable of processing materials from small to large sizes (up to 2500mm). Additionally, we possess NC equipment for long materials, allowing us to conduct prototypes on NC cutting machines before the production of press molds. 【Features】 ■ Equipped with machining centers for small to large cutting processes ■ Capable of processing long materials from palm-sized to 2500mm ■ Prototyping can be conducted on NC cutting machines before the production of press molds *For more details, please refer to the related links or feel free to contact us.

Company：DAIKI
Price：Other

Processing Technology
Machining

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Resin cutting processing! Capable of handling difficult-to-cut materials!

We can handle various resin cutting and difficult-to-machine materials! We can accommodate both domestic and international requests! Please consult us regarding dimensional tolerances!

We perform various resin machining from drawings and data. You can choose your desired size and material according to the intended use. Even if integrated processing is difficult, complex shapes can be produced through segmented processing. Additionally, we can also create the necessary 3D data from drawings or sketches, so please feel free to consult with us. 【Features】 ■ You can choose your desired size and material ■ Complex shapes can also be produced ■ 3D data can also be created from drawings or sketches *For more details, please refer to the PDF document or feel free to contact us.

Company：MIXER
Price：Other

others
Machining

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cold forging and precision machining

We excel at mass production of shaft-type components! We can propose processing methods that are low-cost and have short delivery times.

At Kajiume Industrial Co., Ltd., which is part of our business group, we specialize in "cold forging and precision machining." We focus on integrated production until completion. We are particularly skilled in mass production of shaft-type components and have established a system that ensures a stable supply of products at all times. Additionally, depending on the lot size and precision requirements, we can propose low-cost and short-delivery machining methods, which is one of our strengths. 【Features】 ■ Specializing in integrated production until completion ■ Skilled in mass production of shaft-type components ■ Established a system for stable product supply at all times ■ Capable of proposing low-cost and short-delivery machining methods *For more details, please refer to the related links or feel free to contact us.

Company：日本製造
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Leave it to us for precision machining such as 0.01mm! Cutting processing for automotive parts.

Leave precision machining of 0.01mm to us! High quality and strict delivery deadlines even for mass production.

We would like to introduce our business group, "Miyazaki Iron Works Co., Ltd." We primarily engage in cutting processing for automotive parts, consistently implementing the manufacturing of pinions that require high-level through-hole processing technology. We mainly perform cutting processing for automotive parts, machining iron materials such as bars (round bars) to achieve precise dimensions. [Features] ■ Primarily engaged in cutting processing for automotive parts ■ Capable of machining iron materials such as bars (round bars) to achieve precise dimensions ■ Strengths include high quality and strict adherence to delivery times even in mass production *For more details, please refer to the PDF document or feel free to contact us.

Company：日本製造
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Precision machining of automotive parts

Master of Cutting! Introducing examples of precision cutting processing for automotive parts.

We would like to introduce a case where we processed and manufactured a product requested by a client without any secondary subcontracting, and carried out the inspection and shipping process. In this case, there were challenges such as wanting to shorten the delivery time as much as possible and wanting to keep the price reasonable. Our company has maintained zero delays in delivery for many years. Additionally, we provide our services at prices below the market rate. [Challenges] ■ Wanting to shorten the delivery time as much as possible ■ Wanting to keep the price reasonable ■ Wanting to purchase in small lots ■ Wanting to minimize defects through thorough quality control *For more details, please download the PDF or feel free to contact us.

Company：日本製造
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Initial inspection, interim inspection, and shipping inspection are also conducted! Acrylic and polycarbonate cutting processing.

Certified "Takumi" polishing technology! Quick delivery for orders ranging from 1 to over 1 million pieces!

Our company, as a plastic machining manufacturer, is involved in a wide range of fields including industrial equipment, plant equipment, and scientific instruments. We can accommodate orders from 1 to over 1 million units with an appropriate production system and processing equipment for short delivery times. Continuous operation is also possible with a 24-hour system. Furthermore, we conduct dimensional inspections and appearance inspections, delivering high-quality processed products with a robust quality system in accordance with ISO9001. 【Trimming Department Machine Specifications】 Machine Brand Size ■ Projector Measurable up to 150×150 ■ Drilling Machine (DZ-DESK) Up to 3mm thickness ■ Masking (Lami-Man) Up to 8mm thickness, up to 1180mm width ■ GODO Solution ■ Nasca CAD/CAM ■ Mastercam X8

Company：マーク工業
Price：Other

others
Machining

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting processing <A wide range of machining centers available>

Various processing options available! We can also handle long materials from palm-sized to 2500mm.

Our company offers a wide range of machining centers, capable of performing "cutting processing" for materials ranging from small sizes to large ones (up to 2500mm). This processing method involves carving out the shape of products from plastic materials, eliminating the need for molds. As a result, there are fewer steps to reach the final product, allowing for speedy production. Additionally, we accommodate various types of processing, such as cutting and drilling. Please feel free to contact us when you need our services. 【Features】 ■ A wide range of machining centers available ■ Capable of speedy production ■ Various processing options, including cutting and drilling ■ Processing available for materials ranging from small sizes to large ones (up to 2500mm) ■ Consultation for prototypes before mass production is also available *For more details, please refer to the related links or feel free to contact us.

Company：DAIKI
Price：Other

others
Machining

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting process <Consultation available for prototypes before mass production>

Leave the frame, duct, etc. to us! We also handle various processing such as cutting and drilling.

In our company, we also accept consultations for prototypes before mass production in our "machining" services. Prototyping can be done using NC machining before the production of press molds. Additionally, we have both small and large machining centers, capable of processing materials ranging from palm-sized to 2500mm in length. 【Features】 ■ Prototyping can be done using NC machining before the production of press molds ■ Quick production with fewer steps ■ Various processes such as cutting and drilling are possible ■ A wide range of machining centers are available ■ Capable of processing materials from small to large (up to 2500mm) *For more details, please refer to the related links or feel free to contact us.

Company：DAIKI
Price：Other

others
Machining

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Machining Product List and Ranking from 52 Manufacturers, Suppliers and Companies | IPROS

Machining Manufacturer, Suppliers and Company Rankings

Machining Product ranking