Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
121～150 item / All 537 items
![[Inspection Equipment] ECU Intermediate Inspection Device](https://image.www.ipros.com/public/product/image/16f/2000607980/IPROS30824976817603056205.jpeg?w=280&h=280)
Fully automated line for inspecting multiple circuit boards before separation.
Perform ROM writing and function testing on multiple circuit boards (up to 8) before separation. The boards are conveyed on a conveyor for inspection at each stage. Capable of accommodating circuit boards of various sizes.
Final inspection device for leveling function.
A mechanism that uses weights for measurement and applies the same load in the forward and depth directions.
![[Production Achievement Introduction] Housing for UV Irradiation Lamps](https://image.www.ipros.com/public/product/image/1c4/2000608373/IPROS30057351324898005893.jpeg?w=280&h=280)
Ceiling-mounted UV irradiation lamp housing
In addition to completed devices and assembled products, we can also create custom add-ons tailored to your needs. Trust us with everything from small items to large ones.
Easily achieve flexible inspections like visual checks. Instantly detect products that do not meet shipping standards.
With just one missing ingredient, you could lose valuable trust. With TDI-P's "Color Discrimination Inspection Device," products that do not meet shipping standards are detected instantly. It automatically inspects irregularly shaped missing ingredients, such as the contents of food. After image inspection, it can sort good and defective products and eliminate the defective ones. Inspection can be performed simply by adding cameras, lighting, and sensors to existing production lines. For more details, please contact us or refer to the catalog.
The starting point is that it is an inspection that minimizes equipment investment.
Until now, image inspection machines have all been very expensive, using industrial cameras. Nevertheless, the current situation is that the field of view is narrow, and focus cannot be adjusted due to the height of the parts. We focused on this issue and worked on developing software that controls digital cameras available in the general market to the utmost limit. At SG Tech, we propose a low-cost, high-performance solution system.
Equipped with a multi-focus X-ray tube! Effective for various applications such as resin parts, rubber parts, and metal parts.
The "Cheetah EVO" is a micro-focus X-ray fluoroscopy and CT system with dimensions of W1,650×D1,400×H2,050mm. It is equipped with a multi-focus X-ray tube that combines nano-focus mode and high-output mode. In addition to its outstanding expressive power provided by the 16-bit (65,000 gradation) flat panel detector, it is effective for various applications, including not only electronic components but also resin parts, rubber parts, and metal parts. 【Features】 ■ Equipped with a multi-focus X-ray tube that combines nano-focus mode and high-output mode ■ Outstanding expressive power from a 16-bit (65,000 gradation) flat panel detector ■ Effective for various applications Company Name: YXLON *For more details, please refer to the PDF document or feel free to contact us.
Thorough checks from both the new automatic inspection machine and human eyes! A high level of skill is required from the staff.
At our company, we conduct rigorous inspections using image inspection machines to detect minute defects that are not visible to the human eye at the point when printing is completed. We perform both transmission and reflection inspections simultaneously. To ensure that all inspection staff can inspect at the same level, we constantly communicate with each other and thoroughly manage quality in the pre-processing stages. Additionally, before shipment, we conduct thorough checks from both automated inspection machines and human eyes. 【Features】 <Intermediate Inspection> ■ Conduct strict inspections by human eyes at the point when printing is completed ■ Constantly communicate among staff to ensure thorough quality management in the pre-processing stages *For more details, please refer to the PDF document or feel free to contact us.
There is manufacturing performance and reliability with 1500 units.
In order to respond to customer needs more quickly and accurately, we provide comprehensive support for outsourcing. Utilizing our unique technology, achievements, and know-how, we offer a wide range of services from mechanical design to overseas maintenance, while sharing each other's results to enhance synergy. This significantly shortens the time required for product development and increases product reliability.
Leave the color measurement of large items such as printed materials and building materials to us.
The PPLB-210 can measure large items, making it ideal for sampling inspections of printed materials and building materials. (The shooting range is approximately A3) 【Inspection Examples】 Printed materials… Overlay image data of standard and inspection items to measure and display color differences by area. Building materials… Register the captured image of the standard item and measure the color difference with the inspection item for OK/NG judgment. *For more details, please refer to the YouTube video or PDF materials, or feel free to contact us. YouTube video https://youtu.be/TMTItVHccLQ
"A good site is the best salesperson." We aim to create a factory that impresses our customers.
We take pride in being able to meet a variety of requests, as we have equipped ourselves with a diverse range of facilities.
Detecting fine surface defects such as scratches and pits on the surface of hard disks.
By irradiating the surface of the hard disk with a high-power laser, we detect fine surface defects such as scratches and pits, classify them by defect type, and display the results. Not only can we detect scratches with high sensitivity through simultaneous irradiation of multiple lasers, but we can also determine the uneven shapes of the defects. Features: - Detection of minute defects using high-power lasers - High scratch detection capability - Discrimination of defect unevenness - Automatic focus for all units - Excellent cost performance - Customization support - Automatic inspection for one cassette - Compatible with transparent glass substrates
Detecting chipping, dirt, etc. on glass substrates, media surfaces, and edge areas with high speed and high precision.
This is a mass production line inspection device that detects glass substrates, media surfaces, edge chipping, dirt, etc., with high speed and high precision through image analysis captured by a CCD camera. It can automatically sort disks based on pass/fail judgments, and the inspection results can be communicated to and managed by a higher-level system. - Throughput: up to 800 PPH (depending on inspection conditions) - Footprint: Main body: (W) 1380 × (D) 1700 × (H) 2100 mm (W) 1810: including cassette transfer section PC rack: (W) 570 × (D) 630 × (H) 1850 mm - Cleanliness: Class 10 (at 0.1μm) - Compatible with automatic transport systems Inspection specifications: - Supported disks: 1.89”, 2.5”, 3.5” - Inspection area: entire area excluding the inner peripheral end face (or designated area) - Sensor element size: 7μm - Pixel resolution: inspection area (dependent on lens magnification) - Lens magnification: 1x to 3x (designed according to inspection content) - Design example: 2.5” disk, 800 PPH Inspection area: Inner circumference: R10.0 to R15.0 (2x) Outer circumference: R31.0 to R32.5 (3x)
Transparent wafers also undergo high-speed inspection! High-output lasers detect tiny scratches and particles!
The "Laser Explorer" is the latest wafer surface defect inspection device that also supports transparent wafers. A high-power laser detects minute defects such as scratches, pits, and particles! It can be utilized for shipping and receiving inspections of wafers, as well as for quality control in the epitaxial process! 【Other Features】 ■ High throughput (inspects 25 wafers in a cassette in about 40 minutes) ■ Discriminates the unevenness of defects ■ Automatic focusing for all samples ■ Customization support ■ Automatic inspection for one cassette ■ High-precision marking for defects (optional) ■ Defect review using a laser microscope (optional)
Degradation evaluation of ceramic thermal barrier coating for gas turbine thermal power plant by using few GHz microwave
This invention is about a non-contact & non-destructive inspection method for evaluating the degradation with the age of thermal barrier coating on heat resistant metallic material by using microwave. The formation and growth of thermally grown oxide (TGO) which is formed as a result of aging, is evaluated for ceramic coated element used in gas turbine thermal power generation, and the interfacial strength is indirectly evaluated. YSZ (top coat) is used in ceramic coating for gas turbine element, and MCrAlY alloy layer (bond coat) is inserted between the YSZ and the substrate (Ni-based superalloy) to increase delamination resistance. This element is known to form TGO on the bond coat as the material deteriorates, so the element life evaluation is possible by evaluating TGO.
For authenticity verification and quality control of precious metals! Non-destructive, quick, and accurate measurement is possible.
We handle measuring instruments that can quickly and non-destructively determine the authenticity of precious metals manufactured by FISCHER. The "SIGMASCOPE GOLD" measuring instrument measures gold ingots and coins based on their electrical conductivity. This is possible because the conductivity differs between pure gold and alloys. The "X-RAY XAN series" analysis device can accurately analyze the composition contained in precious metals using fluorescent X-rays. In addition, we offer a wide range of products to meet various customer needs. 【Features】 ■ SIGMASCOPE GOLD B - Measures the conductivity of gold ingots up to approximately 18mm thick - Determines whether it is pure gold or an alloy - Allows selection of three measurement ranges based on the penetration depth of the gold ingot *For more details, please refer to the PDF document or feel free to contact us.
A display inspection device that can leave logs as needed, such as measurement values, and allows operations equivalent to a PC.
The "FREEDOM mk II" is a base unit capable of simultaneous current measurement from four modules. It supports 4K4K (4,096×4,096) as standard. With functional expansion through customization, it can support up to 8K4K. Additionally, the expansion board can be customized to suit the customer's environment, providing an appropriate inspection environment (optical adjustments, frequency measurements, PWM output, etc.). 【Features】 ■ High resolution of 4,096 x 4,096 ■ 8 power supplies for 4 modules ■ Simultaneous current measurement from 4 modules ■ Maximum output resolution is 4K4K ■ 8 power supplies per module (total of 32) *For more details, please refer to the PDF document or feel free to contact us.
High detection sensitivity & long lifespan! The belt width can be up to 800mm and is capable of multi-lane inspection.
"Dymond" is an X-ray inspection device that contributes to food safety and improved production efficiency. We offer four models with different outputs and sizes, capable of inspecting packaging of various sizes. The belt width can accommodate up to 800mm and is also capable of multi-lane inspections. 【Features】 ■ High detection sensitivity & long lifespan ■ High reliability, detects foreign objects of various materials ■ Wide range of product lineup ■ Easy operation *For more details, please refer to the PDF document or feel free to contact us.
For inspection of rose products and bare products! It can remove various foreign substances from raw materials.
"Dymond Bulk" is a system that enables accurate X-ray inspection for bulk materials in the food industry. By detecting foreign objects such as stones and metals and removing them from the product flow, it contributes to the safety of both the products and the machinery. It blocks the contamination of foreign objects at the raw material stage, preventing their entry into the product flow. 【Features】 ■ Achieves high-sensitivity detection of iron, non-ferrous metals, etc. using X-rays ■ Intuitive operation ■ Worldwide service including remote support ■ High-performance interface for direct connection to networks ■ Removes various foreign objects from raw materials *For more details, please refer to the PDF document or feel free to contact us.
A flat film defect inspection method that can completely detect flaws that are difficult to see with only one wavelength.
We handle the "Flat Film Defect Inspection System" manufactured by Dr. Schenk (Germany). With high-speed switching technology for both bright and dark light sources, images of the same defect can be captured from up to 5 different light sources, allowing for the detection of defects that may not be easily visible with just one wavelength. This enables us to achieve a high defect classification capability, allowing for the distinction between Critical Defect, Marginal, and Negligible. 【Features】 ■ Manufactured by Dr. Schenk (Germany) ■ Capture images of the same defect from different light sources with up to 5 channels ■ Completely detect defects that are not easily visible with just one wavelength ■ High S/N ratio detection for defects due to unique high-brightness LED light sources ■ Observation of film quality such as film thickness and haze is also possible (software option) *For more details, please refer to the PDF document or feel free to contact us.
![Notice of Participation in "Mechatrotech Japan 2023" [Yamazen TFS]](https://image.www.ipros.com/public/product/image/22f/2000997120/IPROS94161760886457735865.png?w=280&h=280)
Exhibition of automated lines for deburring, measurement, and inspection processes! Automation of inter-process transportation has been made possible by utilizing AGVs!
The automated processes after work processing include deburring, non-contact roughness measurement, non-destructive hardness measurement, and AI appearance inspection. Unmanned transport between each process is carried out by AGV, and the status of each equipment and production results are aggregated and centrally managed through automatic operation monitoring. We will thoroughly resolve the concerns of each site regarding the shortage of skilled workers, labor saving, and safety! Our company will exhibit at "Mechatrotech Japan 2023," which will be held from October 18 (Wednesday) to 21 (Saturday), 2023. We sincerely look forward to your visit. 【Features of the Automated Process】 ■ Deburring: Automated with collaborative robots ■ Non-contact roughness measurement: High-speed inspection of gear tooth surface characteristics, capable of inline inspection ■ Non-destructive hardness measurement: Significant cost reduction through time savings from process reduction and waste elimination ■ AI appearance inspection: Comprehensive support for achieving automation of the inspection process *For more details, please refer to the PDF document or feel free to contact us.
![What is seal inspection? Introducing inspection methods and inspection equipment! [Yamazen TFS]](https://image.www.ipros.com/public/product/image/162/2001108931/IPROS14863112100518082013.png?w=280&h=280)
What is seal inspection? In the production site, there is a process for seal inspection that prevents the outflow of defective products.
This document provides information about seal inspection methods and inspection equipment. It offers a detailed introduction to the main methods of seal inspection, including infrared, internal pressure gas, and X-ray inspection. It also includes details about our inspection equipment, so please feel free to read through it. [Contents] ■ What is a seal? ■ What is seal inspection? ■ Methods of seal inspection ■ Suitable for seal inspection: Introduction to soft X-ray inspection equipment *For more details, please refer to the PDF document or feel free to contact us.
Automation of printing inspection, pinhole inspection, seal misalignment inspection, and bite inspection in a food factory on one line.
We have introduced a solution that combines "visual inspection equipment" and "soft X-ray inspection equipment" to automate the inspection process for Cosmos Food Co., Ltd. As a result, we have automated printing inspection, pinhole inspection, seal misalignment inspection, and bite inspection on a single line, reducing the required personnel for inspection tasks by two. 【Challenges Before Implementation】 - Depending on the number of personnel, restroom breaks could only be taken during shift changes. - There were differences in inspection standards among employees, leading to inconsistent inspection criteria. - Training new employees took a significant amount of time. 【Benefits of Implementation】 - Reduced burden on employees - Standardization of inspection criteria - Decreased training time for new employees - Ensured personnel interchangeability *For more details, please refer to the PDF document or feel free to contact us.
”NEW μ-X360s” The world's lightest and smallest
Portable X-ray Residual Stress Analyzer NEW μ-X360s 【Operability】 ・Easy sample setting,measurement time:Approx.60secs(Ferritic samples) 【Portability】 ・Sensor unit:Approx.2.4kg,Power supply unit:Approx.6.2kg. ・Ideally suited for field measurements. 【Applications】 ・Thermal treatment industrial of products,welding,plastic forming,surface reformation,monitoring and maintenance of plant and infrastructure.
Analyzing the causes of cracks/chips in metals by measuring residual stress! Measuring tensile and compressive stresses in mechanical parts and transportation equipment in a "non-destructive & non-invasive" manner.
Are you struggling with cracks/chips caused by residual stress due to metal fatigue? "Cracks appear when placed..." "Welded areas often crack..." "I want to improve the durability of metal products..." and so on. By measuring the residual stress remaining on the surface of steel materials, we can clarify the causes of metal cracks/chips and help optimize quality control and maintenance! *For more details, please download the PDF or feel free to contact us.
Non-destructive testing equipment for the aerospace industry using TSR processing
【Case Studies】 Aerospace industry, defense industry, power generation industry, automotive industry, etc., both domestic and international. 【Product Introduction】 ■MOSAIQ - Simplifies the inspection of large structures - Processes for image processing, analysis, and synthesis handled in one step ■TAFIS - Infrared inspection device specifically for turbine blades - Automation system ■ThermoScope2 - Allows for standalone operation with an interactive display - Equipped with interlayer delamination, FOD (foreign object detection), adhesive failure, corrosion, water intrusion, and impact damage inspection functions ■EchoTherm - High-performance analysis and processing routines - High cost-effectiveness ■Voyage IR Pro (scheduled for release soon) - Portable high-performance non-destructive testing device ■Virtuoso (scheduled for release soon) - Latest ultra-high-performance analysis software for specialized technicians *New products such as portable non-destructive testing devices and the latest software (for technicians) are not yet released, but please feel free to contact us if you have any questions or concerns. For more details, please download the catalog or contact us.
This is a concrete rebar corrosion inspection device that can detect the corrosion state of rebar in concrete, compliant with ASTM C876.
Corrosion of rebar is greatly influenced by the quality and structure of the concrete. Ideally, rebar is covered by high-quality hardened concrete and is protected by the alkaline components within the surrounding concrete material. Conversely, this protection from alkaline components can be compromised by the carbonation effect of chlorides. When the protection from alkaline components weakens, the rebar is exposed to oxygen and moisture, making it more susceptible to corrosion. Therefore, the early detection of this corrosion becomes very important.
Quality comprehensive management is further accelerated! Enhanced measurement algorithms enable inspection of a wide range of substrates.
The conventional visual inspection machines were unable to perform comparisons between model substrates and patterns. The 'Focus-5500DT' is a visual inspection machine that allows for the storage of inspection content history as measurement values, making traceability of measurement values easy. Due to the CAD data of the substrate design and the internal library data, there is no need for the conventional inspection setting programming, significantly reducing the time required for inspection preparation settings to one-fifth to one-tenth of that of conventional inspection machines. Additionally, it is equipped with performance similar to the visual measurement inspection machine "Focus 5000 GX," achieving complete compatibility with inspection data. 【Features】 ■ A wide range of substrates can be inspected thanks to enhanced measurement algorithms. ■ SPC (Statistical Process Control) allows for automatic and quantitative graphical display of quality management. ■ Overall quality management is further accelerated. *For more details, please refer to the PDF materials or feel free to contact us.
From conventional appearance inspection (AOI) to next-generation appearance measurement (AOM)! Determining substrate components using multi-directional LED lighting and multiple images.
The "Focus-5000GX" is an electronic circuit board appearance measurement inspection machine that quantitatively determines component misalignment and solder quality evaluation indices through vector imaging measurement and solder shape analysis. No good sample boards are required. It comes standard with a board transport conveyor for automatic inspection. Test programs are automatically created using CAD data, mounting data, and a package library that shows the standard component outlines. 【Features】 ■ Judgment of board components using multi-directional LED lighting and multiple images ■ No good sample boards required ■ Supports large boards up to 460×510mm ■ High-precision orthogonal robot ■ Comes standard with a board transport conveyor for automatic inspection *For more details, please refer to the PDF materials or feel free to contact us.
Efficient because multiple tests can be conducted at once! It is safe as there is no contact with moving parts or high-voltage circuits.
The "State Inspection Device" is a device that consolidates multiple testers into one to reduce processes and evaluate products. It switches circuits for each tester used, measures resistance with a digital multimeter, and determines surge waveforms with a surge tester. The inspection results are displayed using lamps installed on the device. Due to the background of wanting to consolidate processes because "measuring with multiple testers involves many setups and is inefficient," and "it is very dangerous to use high voltage, so we want to work safely," this device has been introduced. [Purpose of Introduction] ■ Reduce operational burden - We want to conduct multiple tests at once. ■ Work safely - We want to avoid touching high-voltage circuits. *For more details, please refer to the PDF document or feel free to contact us.
