Last Updated： Aggregation Period:May 13, 2026～Jun 09, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 13, 2026～Jun 09, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 13, 2026～Jun 09, 2026
This ranking is based on the number of page views on our site.
181～210 item / All 915 items
[New Release] For connecting small diameter VP pipes and HI-VP pipes!
This is exclusively for "small-diameter PVC pipes" that could not use GR, FX, or FZ types. *Cannot be used for hot water piping. [Features] - No secondary processing of piping required - Can be installed with just one torque wrench - Allows for piping connections in narrow spaces *For more details, please refer to the PDF materials or feel free to contact us.
Improved corrosion resistance: New release of hot-dip galvanized products! Disconnect prevention fittings for Atoms coupling.
Significantly reduce the risk of disconnection! We mitigate the risk of piping coming loose from the Atom's coupling due to insufficient bolt tightening. *For those interested, we also provide access to "tensile test data," so please feel free to contact us. 【Features】 ■ Simple installation by just tightening the bolts. ■ Solid support with joint fittings and angle pieces that have a thickness of 6mm (Note 1). ■ High-strength bolts with a strength classification of 10.9 (Note 2) are used for the joint fitting bolts, allowing for tightening at high torque values. Note 1: For sizes 20A to 32A, the thickness is 4.5mm. Note 2: Galvanized products are equivalent to 8.8. *For more details, please refer to the PDF materials or feel free to contact us.
For repairing water leaks in the threaded joint section!
【Features】 ■ Repairable without stopping the fluid ■ Good workability and easy to apply ■ Usable not only for joints with steps but also for leaks in straight pipe sections *For more details, please refer to the PDF document or feel free to contact us.
This is a drainage joint for exposed piping. It is easy to install with band tightening! The inner surface is flat.
This product is the exposed band clamp type of the Atom Joint (rubber flexible expansion joint/vibration joint) series, model 【AJ-DA】. Unlike metal flexible expansion joints, rubber flexible expansion joints are elastic materials themselves, allowing them to follow complex displacements, making them suitable for sites requiring eccentricity. The flat inner surface reduces the risk of liquid accumulation. 【Features】 ■ Easy installation with band clamping ■ Flat inner surface suitable for rainwater drainage ■ For exposed use *For more details, please refer to the PDF materials or feel free to contact us.
Low reaction force, large expansion and contraction, corrosion resistance, wear resistance, weather resistance, and vibration resistance to meet various needs.
CSM Corporation optimally selects the characteristics of both metals and non-metals to meet various needs such as low reaction force, large expansion and contraction, corrosion resistance, wear resistance, weather resistance, and vibration resistance. The "Expansion Joint Comprehensive Catalog" includes a variety of products such as "metal expansion joints" in both no-welding and welding types, "non-metal expansion joints (fabric)" for high-temperature ducts and piping, and numerous "technical materials" related to the design and installation of expansion joints. For more details, please contact us or refer to the catalog.
Developed a super low-reactivity bellows by using thin material and maximizing the height.
The ultra-low reaction bellows made of metal expansion joints have been developed using thin-walled materials and maximizing the height of the corrugations to achieve ultra-low reaction performance. This allows for a large amount of expansion that traditional metal products could not accommodate, making it possible to replace non-metal products. It can help reduce costs in piping work. It can be used for applications such as high-temperature duct joints, air conditioning duct joints, and vibration absorption for blowers. By using a loose flange type, the gas connection part will be made of the same material. Additionally, installation work becomes easier. Due to the ultra-low reaction, the spacing dimensions can be designed to be shorter. The materials used include stainless steel, Hastelloy, Inconel, and others. The thickness ranges from 0.3 to 1.0 mm. For more details, please contact us or refer to the catalog.
Dust covers, flexible shoots and ducts, vibration-absorbing bellows, etc.
Non-metallic flexible pipe joints have a very flexible and pliable nature that cannot be achieved with metal. By selecting the optimal materials, we provide products that excel in water resistance, oil resistance, and weather resistance. Additionally, they are equipped with heat resistance that allows for use at temperatures exceeding 1000°C, thanks to special coating materials and composites. We offer high-temperature duct flexible joints, dust covers, flexible shoots and ducts, vibration-absorbing bellows, pipe expansion joints, special heat-resistant expansion joints, and special corrosion-resistant expansion joints, among others. For more details, please contact us or refer to our catalog.
Introducing PP-made disposer fittings such as eccentric unions and S traps!
This catalog introduces disposal fittings. It includes the cleaning port model "KDT-003-001," as well as the reducing union "KDT-004-001" and the S trap "KDT-002-001." All materials are made of PP. 【Contents】 ■ P trap (30A) ■ S trap (30A) ■ Extension pipe (with cleaning port) (30A) ■ Reducing union (30A×40A) *For more details, please refer to the PDF document or feel free to contact us.
Easy connection of three types of pipes! A type that is compatible with steel pipes, PVC pipes, and polyethylene pipes has arrived!
The "LA Coupling" is a fitting that can be directly connected to a pipe without threading it. It features a structure that seals the fluid with a rubber gasket, allowing for direct connection to the pipe without the need for any processing, thereby reducing the labor involved in piping. 【Features】 ■ Safe and reliable construction ■ Ideal for repair and renovation work ■ Accommodates pipe vibration and expansion ■ Half a century of proven performance and a wide range of products ■ Easy joining of three types of pipes (HI-LA Multi) *For more details, please refer to the PDF document or feel free to contact us.
Leakage due to the "biting" phenomenon has drastically decreased! Stainless steel pipe fittings coated with fluorine-based sealant!
The stainless steel piping fitting "ZD SUS Fitting" is a fitting that has been pre-coated with a fluorine-based sealing material for stainless steel threaded fittings. The sealing material, applied in a uniform and optimal thickness, significantly improves work efficiency, and by eliminating inconsistencies in joint quality, it maintains high quality even after installation. 【Features】 ■ Light threaded torque ■ No need to apply expensive sealing materials, making it economical and hassle-free ■ Prevents contamination of the sealing material ■ Angle adjustment is possible after threading ■ Suitable for various piping applications, including food-related and steam piping below 150°C *For more details, please refer to the PDF document or feel free to contact us.
Responding to the needs for efficient and rational piping methods with a rich product lineup and accumulated technical expertise!
The "Top Joint Piping System" is a housing-type pipe fitting developed with the aim of streamlining and reducing labor in piping construction. It includes products such as "R-OII," which suppresses elongation during pressurization and enhances fixing functionality, as well as "R-5, R-5H," and "R-O, R-OH." It excels in workability and is widely used both domestically and internationally. 【Features】 ■ Abundant surface treatments ■ Equipped with a bolt drop prevention feature ■ Adoption of heat-resistant and chlorine-resistant gaskets ■ Ideal for stainless steel piping ■ Easy to install *For more details, please refer to the PDF materials or feel free to contact us.
"HASEGAWA" compressor equipped, energy-saving, space-saving
Equipped with the world's top brand HASEGAWA compressor, the condensing unit planned, designed, and manufactured by Hasegawa Iron Works offers satisfactory performance and can adapt to a wide range of applications, allowing for the selection of suitable configurations. The compact system design makes installation, construction, and operation easy, and maintenance can be performed quickly and easily in a short period. *For more details, please refer to the PDF materials or feel free to contact us.
A refrigerator that prioritizes maintaining the freshness of products by controlling temperature and humidity.
A custom-made solution tailored to the installation location according to the layout! An original refrigerator (freezer-refrigerator) with a perfect size. Our in-house developed electronic control system "Hishinotron" detects humidity, dehumidification, and temperature adjustments with a single sensor, keeping the interior in optimal condition.
Prefabricated piping components that are optimal for all piping to achieve efficient piping work!
MIE Tech Co., Ltd.'s prefabricated piping is ideal for all piping work that achieves efficient piping operations. High quality, low cost, and short delivery times. Since most of the component manufacturing is done at our factory, we can eliminate welding omissions on site, allowing for easy and quick piping work. For more details, please download the catalog or contact us.
Stable quality titanium butt-welded pipe fittings
Titanium has a low specific gravity and excels in specific strength, corrosion resistance, and workability. It is widely used in chemical plants, nuclear power plants, space development facilities, and aircraft, among others. For more details, please download the catalog or contact us.
Water supply, hot water supply, and heating and cooling piping material 'Miegrip'. Certified to Stainless Steel Association Standard SAS 322.
The grip-type pipe fitting "Mie Grip" for general piping made of stainless steel is certified to the Stainless Steel Association standard SAS 322. It is a simple task of inserting the pipe and tightening it with a special tool. The use of a biting ring made of hardened martensitic stainless steel provides excellent pull-out resistance. Even if the pipe twists to some extent due to sudden torque load, it maintains a pressure resistance of 2.5 MPa. In case of forgetting to crimp, any defects will definitely be discovered during the water pressure test after installation, providing peace of mind. For more details, please download the catalog or contact us.
A screw-type pipe fitting that is highly resistant to corrosion, aesthetically pleasing, and hygienic.
Stainless steel threaded pipe fittings are made from stainless steel. They are highly resistant to corrosion, have an attractive appearance, and are hygienic. There is no worry about rust, and there is no need for painting or plating. The cast products are made from high-strength stainless steel SCS13A and undergo heat treatment and pickling through lost-wax precision casting, resulting in a fine and stable microstructure that ensures high strength and safe usage. Additionally, the surface finish is dense and beautiful, with sufficient dimensional accuracy. For more details, please download the catalog or contact us.
High quality and well-established service system. We can accommodate a wide range of sizes from small diameter pipes to large diameter pipes. We also respond to thickness requirements based on needs.
Our company manufactures high-quality "stainless steel butt-welded pipe fittings" under thorough process management from material acceptance to product completion. The manufacturing facility has obtained ISO 9001 certification and JIS mark certification. We can accommodate a wide range of dimensions from small diameter pipes to large diameter pipes, and we can also handle wall thicknesses from thin to thick. We also offer various inspection services, including material acceptance inspection (material confirmation), weld inspection, non-destructive testing, pressure testing, and dimensional inspections. 【Manufactured Products】 ◎ 45°・90°・180° Elbows ◎ Same Diameter and Different Diameter Tees ◎ Concentric and Eccentric Reducers ◎ Caps ◎ Stub Ends 【Delivery Examples】 ◎ Welding fittings for factories ◎ Welding fittings for construction ◎ Welding fittings for shipbuilding, such as tankers ◎ Flanges ◎ Threaded fittings ◎ Prefabricated processing ◎ Products compliant with electrical and gas business regulations, etc. *For detailed specifications, please refer to the PDF document or feel free to contact us.
![Prefabricated Processing Field [Case] << Rack Piping](https://image.www.ipros.com/public/product/image/303/2000074578/IPROS4558543418854727.jpg?w=280&h=280)
Technology cultivated as a pipe fitting manufacturer.
By installing a variety of piping in a single rack (unit) and connecting each rack, it is possible to simultaneously connect various types of piping.
Incredible! The number of welds has been reduced from 8 to 3! By reducing the number of joints and welding work, piping costs have been cut by 50%! The welding will be performed by JIS certified welders.
The prefabricated piping from MIE Tech Co., Ltd. is ideal for all types of piping work that achieves efficient piping operations. High quality, low cost, and short delivery times. Since most of the component manufacturing is done at our factory, we can eliminate welding deficiencies on-site, allowing for easy and quick piping work. *For more details, please download the catalog or contact us directly.*
Achieved a significant reduction in work time for 'housing joints' that can be connected with two bolt fastenings!
The housing-type pipe fitting "MIE-K" is a pipe fitting that does not require threading or welding. It can be tightened using only the included bolts and nuts with a glove-type pipe fitting. Compared to flanges, its outer dimensions are smaller, making it easy to install in tight spaces. Additionally, since only two bolts need to be tightened, work time can be reduced. 【Features】 ■ Significantly reduces work time compared to threading, welding, and flanges ■ Work involves only tightening two bolts ■ Has expansion and contraction performance and flexibility, allowing for the absorption of interlayer displacement *For more details, please download the catalog or contact us.
A wide variety of insert welding and threaded piping fittings are featured! We are currently offering a comprehensive catalog of stainless steel high-pressure pipes for free!
This is the comprehensive catalog for MIE Tech's "Stainless Steel High-Pressure Pipe Fittings." It features a wide range of stainless steel high-pressure pipes with socket welding and threaded types. 【Features】 ■ Mechanical Properties: According to JIS regulations regarding materials ■ Pressure Resistance: Capable of withstanding the same pressure as specified in the water pressure test characteristics of JIS G3459 ■ Types: 90° elbow, 45° elbow, tee, cross, full coupling, half coupling, boss, cap, union, hex nipple, hex plug, square head plug, bushing *For more details, please check the PDF available for download.
The design makes it easy to accommodate power cords and similar items! The elongated holes provide excellent workability for screws and bolts.
NEW HIKARI is the original brand of Shimizu Corporation. We offer a wide range of construction hardware, fittings, and equipment for professional craftsmen and specialized contractors. Our products have been cherished for many years due to their reliable quality. The "Extra Thick Metal Fold - One-Character Joint" (Stainless Steel) features elongated holes, making it an excellent product for installation with screws and bolts. The hole pitch is 25mm, making it easy to accommodate electrical wires and cables. Please feel free to contact us when you need assistance. 【Specifications】 ■ Material: Stainless Steel SUS-304 ■ Finish: Hairline ■ Screw Diameter: 5.5×10 Long Hole *For more details, please download the PDF or feel free to contact us.
High corrosion resistance with cationic electrodeposition coating finish! Features a hole pitch of 15mm, making it easy to accommodate wire cables and more.
NEW HIKARI is the original brand of Shimizu Corporation. We offer a wide range of construction hardware, fittings, and equipment for professional craftsmen and specialized contractors. Our products have been cherished for many years due to their reliable quality. The "Extra Thick Metal Fold - Straight Joint" (Black Cationic Coating) excels in workability with screws and nuts, and is easy to install on metal surfaces. Due to the cationic electrodeposition coating finish, it also has excellent corrosion resistance. Please feel free to contact us when you need assistance. 【Shapes】 ■ 5 Flat Type (M5 Tap) ■ Flat Type (Long Hole) ■ Flat Type (M5 Tap + Long Hole) ■ 90° Bend (Long Hole) ■ 90° Bend (M5 Tap + Long Hole) *For more details, please download the PDF or feel free to contact us.
By shaping into circles or squares and processing the seams with a sewing machine, it becomes possible to meet various customer needs!
We handle various types of "processed canvas." We offer a diverse lineup of processed canvas, including those for general air conditioning, waterproofing, and smoke exhaust systems. 【Product Lineup】 For General Air Conditioning - FN-810 Single-sided aluminum foil laminated glass cloth For Waterproofing and General Air Conditioning - FN-050 Double-sided PVC coated polyester cloth - FN-123 Double-sided PVC coated glass cloth - FN-350 Double-sided PVC coated glass cloth For Smoke Exhaust Systems - FS-800H Single-sided aluminum foil laminated glass cloth When placing an order for processed canvas, please provide the following information: 1. Material 2. Double (W) or Single (S) 3. Number of piano wires (hard steel wires) (P) 4. Stretch 5. Size (A×B×L dimensions) 6. Quantity
The multi-def type closure joint was specifically developed for large-diameter pipelines with a diameter of 2000 mm or more.
The expansion joint for flexible pipes had economic issues due to the structure of its airtight mechanism when used for large diameters (φ2400 or more). Therefore, the Multi-Def was developed for large diameters. It successfully changes the structure of the automatic rubber ring, allowing it to economically and reliably absorb the expansion and eccentricity of large-diameter piping. It is used in water supply pipes for drinking water and in cooling water pipes for power plants.
A maintenance-free expansion joint developed for water pipe bridges and bridge-mounted pipes.
The Victop VT type is a maintenance-free expansion joint developed for water pipe bridges and bridge-mounted pipes. It features a built-in disengagement prevention stopper to prevent disconnection when the allowable expansion limit is exceeded, and it is a compact expansion joint considering the outer diameter of the main pipe.
We will bolt the divided sleeves together.
We will bolt the divided sleeves together. The ID type is an internal repair and reinforcement joint that can absorb expansion, bending, and twisting, similar to the repair sleeve.
Jouetsu solves various customer challenges with special flanges and fittings.
Our company has introduced a machining center for microfabrication as new equipment, which allows us to broadly meet our customers' needs.
Easy installation compatible with impact drivers! Fitting for overhead piping connections with built-in packing.
The "GG-50N/80N/100N" is a lightweight and compact gas grip-type fitting that can be installed in narrow spaces. It can be easily installed in tight areas by simply tightening two bolts on the side of the fitting. This product features a built-in gasket, eliminating the need for assembly, and can be installed using electric tools (compatible with impact drivers). The applicable installation locations are the inner pipes outside and inside the lamp, excluding buried sections, and the applicable fluids are city gas and propane gas. 【Specifications】 ■ Applicable fluids: City gas, propane gas ■ Applicable pipe type: SGP pipe ■ Applicable pressure: 15 kPa or less ■ Applicable installation locations: Inner pipes outside and inside the lamp, excluding buried sections ■ Size lineup: For 50A, 80A, and 100A *For more details, please refer to the PDF document or feel free to contact us.
