Fittings Product List and Ranking from 221 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.

Fittings Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.

  1. SK-KAWANISHI Co., Ltd. Kagawa//Building materials, supplies and fixtures manufacturers
  2. 水研 Shiga//Building materials, supplies and fixtures manufacturers
  3. null/null
  4. 4 アトムズ Chiba//Building materials, supplies and fixtures manufacturers
  5. 5 ショーボンドマテリアル Tokyo//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Fittings Product ranking

Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.

  1. Dissimilar pipe joint (with stop) "All Fits Joint" 水研
  2. Strub Coupling General Catalog ショーボンドマテリアル
  3. Elastic sealing material "Hayaseal NS"
  4. 4 Copper pipe for water supply × stainless steel pipe for piping, dissimilar pipe joint SKX SK-KAWANISHI Co., Ltd.
  5. 5 Water supply PVC pipe × water supply steel pipe dissimilar pipe joint SKX SK-KAWANISHI Co., Ltd.

Fittings Product List

751～765 item / All 903 items

Displayed results
Seismic expansion joint "Flexi-Joint"

Seismic expansion joint "Flexi-Joint"

Seismic expansion joints that absorb stress on communication conduits caused by ground subsidence and distortion.

The "Flexi-Joint" is a seismic expansion joint that adapts to movements such as ground fluctuations with an eccentricity of ±90mm. The ball sections on both sides can bend up to 15 degrees at one point and 30 degrees in the same direction, allowing for flexible piping. There is no need for alignment work for pipe connections, and thanks to its unique mechanism, there is no leakage, ensuring complete insulation for communication cables. 【Features】 ■ For fiber optic and power cables ■ Adapts to movements such as ground fluctuations with an eccentricity of ±90mm ■ Equipped with a generous expansion range of -60mm to +100mm ■ No leakage due to a unique mechanism, ensuring complete insulation for communication cables ■ No need for alignment work for pipe connections *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low reaction flexible tube "K Series L Type"

Low reaction flexible tube "K Series L Type"

We have prepared 3 mountains for 100mm eccentricity and 4 mountains for 200mm eccentricity! The reaction force during displacement is small, making it less likely for the piping to be damaged.

The "K Series L Type" is a flexible pipe designed with low reaction force. Compared to standard flexible pipes, it has a smaller reaction force during displacement, making it less likely to damage the piping. We offer the "KL100" for 100mm eccentric use (above ground and buried) with 3 peaks, and the "KL200" for 200mm eccentric use (above ground and buried) with 4 peaks, which can be used for connecting resin pipes such as PVC. 【Product Lineup】 ■ KL100: 100mm eccentric use (above ground and buried) 3 peaks ■ KL200: 200mm eccentric use (above ground and buried) 4 peaks *For more details, please refer to the PDF document or feel free to contact us.

  • Piping materials (plastic pipes)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Foods Tech Co., Ltd. Company Profile

Foods Tech Co., Ltd. Company Profile

We provide cultivated know-how and reliable technology! Let us introduce you to the business of Food Tech.

Foods Tech Co., Ltd. provides services centered on the design, manufacturing, and construction of general food factory equipment, including food manufacturing machinery, environmental sanitation machinery, sanitary equipment, refrigeration and freezing, and air conditioning. With the automation of food factories, various types of machinery and components are being developed. We aim to continuously provide comprehensive engineering that combines these elements and sometimes develops new ones to deliver a diverse range of systems swiftly. 【Business Activities】 ■ Sales, rental, and renovation of (marine) refrigerated and frozen containers ■ Design and manufacturing of refrigeration, freezing, and heating equipment ■ Design, manufacturing, and installation of sanitary food machinery ■ General renovation work for food factories ■ Water treatment business ■ Design and manufacturing of fully automatic vacuum fryers (patented in Japan and the U.S.) ■ Overseas export operations of food machinery *For more details, please refer to the PDF materials or feel free to contact us.

  • container

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Design and manufacture of fully automatic vacuum fryers.

Design and manufacture of fully automatic vacuum fryers.

We can also accommodate vacuum freeze-drying, vacuum drying, and impregnation! We will manufacture specifications and sizes tailored to your needs.

We design and manufacture fully automatic vacuum fryers tailored to our customers' specifications and sizes. We can also accommodate vacuum freezing, vacuum drying, and impregnation without using frying oil. The "fully automatic vacuum fryer" operates entirely automatically from raw material input to product retrieval, allowing for free setting and modification of frying conditions and other parameters based on raw material (batter) changes. 【Features of the Fully Automatic Vacuum Fryer】 ■ Fully automatic from raw material input to product retrieval ■ Maintains nutrients and produces products with good texture ■ Widely applicable to vegetables, fruits, and more ■ Suitable for ingredients in instant foods and delicacies *For more details, please refer to the PDF document or feel free to contact us.

  • Cooking facility equipment and supplies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Tunnel Freezer

[Case Study] Tunnel Freezer

By updating the existing tunnel freezer, we significantly improve capacity, operability, and ease of cleaning!

We would like to introduce a case study of the "Tunnel Freezer" developed by Foods Tech Co., Ltd. There were issues with the old equipment, which was frequently breaking down, had uneven cooling, and caused products to scatter in various places. Therefore, we introduced this new device. While discussing with factory operators and maintenance personnel, we created a machine that was appropriately sized, structurally sound, and easy to use. As a result, troubles decreased, maintenance became easier, and both productivity and quality improved. [Overview] ■ Background for Introduction - To update the equipment used in a cake manufacturing factory and to accommodate increased production. - The old equipment was difficult to clean and maintain, leading to dissatisfaction among operators. ■ Solution - We listed the problems and discussed solutions while developing the machine. - In particular, we created space around the main body to facilitate cleaning of the body and walls. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Low-Temperature Processing Equipment for Raw Materials (HACCP Compliant)

[Case Study] Low-Temperature Processing Equipment for Raw Materials (HACCP Compliant)

Introduced HACCP-compliant low-temperature processing equipment! Improved quality, productivity, and environmental aspects!

We would like to introduce a case study of the "Low-Temperature Processing Equipment for Raw Materials (HACCP Compliant)" developed by Foods Tech Co., Ltd. There was a need to sort raw materials such as vegetables upon delivery, but there was no dedicated room for this, leading to issues related to hygiene, temperature, and lighting (visibility). Therefore, we created low-temperature processing equipment in compliance with HACCP standards. Due to the low temperature (around 15°C), the deterioration of raw materials was minimized during work. 【Overview】 ■ Background leading to the introduction - There was a need to sort raw materials such as vegetables upon delivery, but there was no dedicated room, and a shared space was being used, which posed hygiene issues. ■ Solutions/Effects - We created low-temperature processing equipment in compliance with HACCP standards. - The lighting became brighter, allowing for immediate identification of defective parts in the raw materials. - Cleaning after work became easier. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] General-purpose Vacuum Cooling Device

[Case Study] General-purpose Vacuum Cooling Device

A vacuum cooling device with a simple structure that requires almost no maintenance! Affordable size and inexpensive.

We would like to introduce a case study of the "General-purpose Vacuum Cooling Device" developed by Foods Tech Co., Ltd. After harvesting vegetables, they have a lot of residual moisture, so even if they are placed directly in the refrigerator, it takes time to cool down to a certain temperature, which affects their freshness. Therefore, we modified a used shipping container for production. It can be used on a rotating basis by individual farmers. Additionally, it can also be used as a cooling device, and when not in use, various items can be stored inside. 【Overview】 ■ Background leading to the introduction - After harvesting vegetables, it takes time to cool down to a certain temperature due to high residual moisture. - Large vacuum cooling devices are expensive to use, making it difficult to perform small-scale vacuum cooling. ■ Solution/Effect - Modified a used shipping container for production. - Installed a roller conveyor inside, allowing for loading and unloading while on pallets. - Can be easily transported on a truck, making it usable in any location. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
K-PLV joint

K-PLV joint

Achieving unified anti-corrosion piping! Threaded anti-corrosion fittings developed for fire protection pipes.

This product is a threaded external corrosion-resistant joint for fire extinguishing pipes. A unified corrosion protection system can be established for areas with challenges such as bends, branches, and steps, which were difficult to address with conventional corrosion-resistant tape wrapping. The joint used is a zinc-coated ductile cast iron pipe joint with the Yubiwa mark. 【Features】 ■ The outer surface of the joint is coated with polyvinyl chloride resin, allowing for excellent corrosion-resistant piping when joined with externally coated steel pipes for fire protection. ■ By using a specially shaped sleeve and rubber ring (caulking tape is also acceptable), the joint between the pipe and the threaded connection is shielded from external corrosive environments. ■ Excellent corrosion resistance is achieved. *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Casting (As-Cast) High Strength Ductile SCM Alternative

Casting (As-Cast) High Strength Ductile SCM Alternative

It is suitable for alternatives to SCM materials and for cost reduction of complex-shaped parts!

Our company has over 80 years of experience in manufacturing cast fittings for water pipes. Leveraging the know-how gained from years of fitting production, we cater to the needs of various fields, offering a wide range of grades from the conventional FCD450 to FCD1200. Additionally, we have developed a new technology, H-FCD, for producing high-strength cast iron products using as-cast (unmachined) methods. This technology will help solve your company's challenges with various advantages. **Features of H-FCD:** - Technology to manufacture FCD800 and FCD900 without heat treatment using as-cast methods. - Established technology for producing high-strength cast iron (FCD800, 900) without adding rare metals. - Utilizes the excellent properties of ductile cast iron (spheroidal graphite cast iron). - Proposes various materials and shapes, including material switching from steel (forged products). *For more details, please refer to the PDF document or feel free to contact us.*

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ductile cast iron substitute for cast steel VE

Ductile cast iron substitute for cast steel VE

High strength with a yield strength of over 90%! Excellent wear resistance, resulting in superior surface roughness during the cutting process.

This product is manufactured by applying heat treatment (QT) to FCD800. It has high strength, with outstanding fatigue strength in the black skin area. It excels in wear resistance and achieves excellent surface roughness in the cutting process. While austempered ductile iron (ADI) with a hardness of HB320 is already difficult to machine, this cast iron can be processed even at a high hardness of around HB430, allowing for gear cutting and small hole tapping. 【Features】 - High strength with outstanding fatigue strength in the black skin area - High yield ratio of 90% (yield strength = over 1080 MPa) - No grinding process required (no heat treatment after cutting) - Excellent wear resistance - Superior damping ability (reduced operating noise compared to steel) *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Azucast (casting release) FCD SC material alternative VE cost reduction

Azucast (casting release) FCD SC material alternative VE cost reduction

How about considering alternatives from SC materials and complex-shaped parts to reduce processing costs?

JFE fittings can achieve stable mass production of high-strength cast iron FCD800 and FCD900 in as-cast condition without heat treatment. As-cast condition means that there are no concerns about distortion or expansion due to heat treatment, allowing for the production of complex-shaped parts. When considering VE or design changes, please consider adopting our as-cast high-strength cast iron (FCD800 and FCD900). 【Features】 ■ Stable mass production of high-strength cast iron FCD800 and FCD900 in as-cast condition without heat treatment ■ No concerns about distortion or expansion due to heat treatment, enabling the production of complex-shaped parts ■ Good machinability, which can lead to reduced processing costs ■ Improved mechanical properties through the refinement of graphite *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Best Joint Catalog

Best Joint Catalog

We propose the best in excellent workability and safety! Introducing housing-shaped pipe fittings (grooved type).

This catalog introduces the "Best Joint," which secures grooves with a split, sturdy housing. It includes product features, the structure of flexible and fixed types, varieties, and dimensions. Additionally, it provides construction guidelines and how to distinguish between flexible and fixed types. Please take a moment to read this when selecting products. 【Contents (excerpt)】 ■Features ■Structure of flexible and fixed types ■Varieties and dimensions ■Characteristics of plated products ■Types of Best Joints *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PS joint

PS joint

Adopting fluorine-based sealants simplifies the construction process! A wide variety of types and sizes are available.

The "PS Joint" is a product with excellent workability, featuring a fluorine-based sealant applied and baked onto the threaded part. It was developed to eliminate the hassle of winding sealing tape or applying liquid sealants compared to conventional construction methods, aiming for speedy piping work. It has excellent sealing performance and is available in various types, including "screw-type ductile iron pipe joints" and "20K continuous pipe joints." 【Features】 ■ Excellent sealing performance ■ Excellent workability ■ Wide variety of types and sizes *For more details, please refer to the PDF materials or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PLS ivory joint

PLS ivory joint

It is possible to create overhead piping that can adapt to various climates and is resistant to external corrosion environments!

The "PLS Ivory Fitting" is a threaded product used for overhead piping such as city gas and LP gas. There are two types available: polyethylene lining (I-PLS) and PVC lining (IPLV). Additionally, we offer the "PLS Ivory Pipe Nipple," which uses a high-performance PLV base pipe and features high-precision threading. 【Features】 ■ The outer coating is available in two types, polyethylene lining (I-PLS) and PVC lining (I-PLV), just like the pipe. ■ Unified piping can be achieved with both the pipe and fittings. ■ The use of specially shaped sleeves and rubber rings shuts out external corrosive environments from the threaded joint between the pipe and fitting. ■ Excellent corrosion resistance can be obtained. *For more details, please refer to the PDF materials or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transition joint

Transition joint

Easy connection between PE pipes and steel or cast iron pipes! A wide variety of products to meet various construction conditions.

The "transition fitting" is a product for polyethylene pipes used for gas. To connect polyethylene pipes with steel or cast iron pipes, polyethylene pipes are pre-assembled into the fitting body, creating an integrated fitting that allows for easy extension or branching from the main or branch pipes. Additionally, a wide variety of types can accommodate various installation conditions. 【Features】 ■ Comprehensive sizes ■ Easy connection between PE pipes and steel/cast iron pipes ■ Wide selection ■ Simple extension or branching from main and branch pipes *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Fittings

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.