Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～14 item / All 14 items
Free samples available! Ideal for improving the strength and durability of concrete, refractory materials, and magnetic products!
Fine particles with a large specific surface area and high SiO2 content silica fume. Ideal not only for concrete, refractory materials, and magnetic products but also for paints, coatings, resins, and rubber.
Mica viscosity mineral - Illite. Free samples are available!
"Ilight" is a type of intermediate mineral between mica and kaolin/montmorillonite suspensions, and it is non-expansive. It has a fine flake structure, excellent suspension and dispersion properties, moisture retention as a functional filler, and high shear flowability. It is widely used in various industries such as paints, resins, rubber, ceramics, and paper, as well as in the fields of feed and agriculture.
Finely finished and easy to apply! A reaction-curing powder filler with excellent anti-mold and anti-rust properties.
The "Konapate Silky 60・120 Type" is a primer putty specifically designed for adjusting various interior substrates such as gypsum board, concrete, mortar, and ALC panels. It has fine particles and minimal shrinkage, making the finishing of the top putty easy. When used in conjunction with "MK Bridge Tape," the seams of the putty become less noticeable. 【Features】 ■ Fine particles with minimal shrinkage ■ Easy finishing of the top putty ■ Good workability and trowel cutting ■ Excellent mold and rust resistance ■ Reduced visibility of putty seams when used with MK Bridge Tape *For more details, please refer to the PDF document or feel free to contact us.
Formaldehyde emission grade F☆☆☆☆! A type developed exclusively for painting substrates with a usable time of 30 minutes.
"Speed 30" is a primer putty specifically designed for adjusting various interior substrates such as gypsum board, concrete, mortar, and ALC panels. It features finely ground particles, significantly reducing shrinkage, and achieves a feather-light trowel application. With an ultra-lightweight packaging (12 kg/box), it boasts the same coverage area as conventional putties (16-20 kg/box). 【Features】 ■ 30-minute working time type developed specifically for painting substrates ■ Finely ground particles that minimize shrinkage ■ Achieves a feather-light trowel application ■ Ultra-lightweight packaging with coverage area equivalent to conventional putties ■ Achieves a beautiful finish when used in conjunction with "bridge tape" *For more details, please refer to the PDF document or feel free to contact us.
Suitable for suppressing track settlement at roadbed consolidation points! A new track maintenance method that "does not use Titanpa."
"Rob X" is a simple-to-manage ballast bottom filler for areas with solidified ballast (such as gravel and mud). It is a moisture-curing polyurethane resin that reacts to moisture from the air and surrounding environment, expanding and hardening. Hardening begins approximately 15 minutes after application, with initial strength developing in about 1 hour. It can be applied without loosening the ballast, increasing the lateral resistance of the ballast by about 30%. [Features] - Moisture-curing polyurethane resin - Initial strength develops in about 1 hour - Can be applied without loosening the ballast - Achieves hardness equivalent to track pads after application - Can be applied in areas with high moisture content - Reapplication is possible *For more details, please download the PDF or feel free to contact us.
A gel-like lubricant that reduces friction between the structure and the ground using advanced construction methods, shield methods, and caisson methods. It suppresses friction regardless of soil type, from aquifers to dry layers.
A gel-like lubricant that reduces friction between the structure and the ground in methods such as thrust construction, shield construction, and caisson construction. It is a jelly-like elastic body that contains slippery components from the surface to the interior. It enables long-term maintenance of low thrust force not only in aquifers but also in previously challenging dry layers (layers without groundwater where the lubricant is absorbed by the ground and lost).
A strong ally for waterway construction!! This epoxy resin-based filler can bond underwater and on wet surfaces, offering excellent workability and versatility for easy use.
"Agripate Aqua" is easy to apply, simply by spreading it on the area to be treated. No primer is needed, and it adheres strongly even underwater or on wet surfaces, making it ideal for repairing joints in irrigation channels and cracks in concrete. 【Features】 ■ Mix equal parts of the main agent and hardener in a 1:1 ratio by hand. ■ Can adhere even in underwater or damp conditions. ■ Strongly adheres to concrete, stone, metal, and more. ■ For application in low temperatures (below -10°C), a winter formula that is easy to mix is recommended. *For more details, please refer to the PDF document or feel free to contact us.
F☆☆☆☆! Powdered filler that can be used for joint treatment of V-cut boards or tapered boards.
"Konapate V 60・120 type" is a reaction-curing powder filler. Pour clean water (approximately 500cc per 1kg of Konapate V) into a clean container, and while sprinkling "Meiko Konapate V" into it, knead for 2 to 3 minutes until the powder is no longer visible, forming a paste for use. If it is too hard or too soft, adjust by adding water or Meiko Konapate V as needed. For the top coat after curing, please use Meiko Paste (general thin coating or water-resistant thin coating). It cures quickly, allowing for a shortened construction period. [Features] - Contains antifungal agent - Reaction-curing powder filler - No cracking or shrinkage from thick application - Cures quickly, reducing construction time - Good adhesion with top paste (Meiko Paste) *For more details, please refer to the PDF materials or feel free to contact us.
Less shrinkage and easy to apply! Powdered filler with anti-mold agent for reaction curing.
The "Konapate Silky II 60・120 Type" is a primer putty specifically designed for adjusting various interior substrates such as gypsum board, concrete, mortar, and ALC panels. This type has less shrinkage compared to conventional products, and the particles have become even finer. With an ultra-lightweight packaging (14kg/box), it boasts the same coverage area as conventional putties (16-20kg/box). 【Features】 ■ Finer particles ■ Less shrinkage compared to conventional products ■ Ultra-lightweight packaging with the same coverage area as conventional putties ■ Contains anti-mold agents ■ Putty color: cream *For more details, please refer to the PDF document or feel free to contact us.
A liquid lubricant that flows easily and enters a narrowed tail void.
1. Due to its good fluidity, it easily enters narrow gaps, and it is effective in propulsion sites where the tail void is narrowed and thrust is increased. 2. Because of its low adhesion, there is less friction resistance during the separation process. 3. It dissolves well in water as a liquid and can be mixed in a short time, making it easy to work with.
Amazing material properties! Portable asphalt-concrete cold-type simple crack filler!
"SHAKE40" is a concrete, room-temperature joint and crack filler that anyone can easily inject. If asphalt or concrete cracks are left unattended, rainwater can seep in and lead to pavement damage. By using this product for the maintenance and repair of existing structures, the progression of deterioration is suppressed. The lifespan of asphalt and concrete structures is extended, and safety is improved. [Features] - Liquid A and Liquid B are different colors, allowing for visual confirmation of adequate mixing. - It is a special non-solvent formula, so there is no shrinkage. - Applying and top-coating with a special stone powder makes repairs less noticeable. - It can be used at room temperature, making it easy to handle and allowing for safe and quick application. - Its low viscosity allows for easy injection into cracks. *For more details, please refer to the PDF document or feel free to contact us.
The role and types of rubber fillers.
Rubber is widely used as an industrial product and everyday item, but it is not made solely from pure rubber material. Rubber products always incorporate "rubber fillers" tailored to their intended use and manufacturing plans. The addition of fillers is essential for reinforcing rubber and increasing production volume. This article will explain the overview and types of rubber fillers. For detailed information, please refer to the related links below.
What is carbon black? Carbon black as a rubber filler.
Carbon black refers to fine particles primarily composed of carbon, typically ranging from 3 to 500 nm in size. It is not only used for coloring black but is also widely used to reinforce rubber. This article introduces the properties of carbon black used in rubber. *For more details, please refer to the related link page or feel free to contact us.*
![Casting defect filling repair putty, 30-minute curing [Steel Nix]](https://image.www.ipros.com/public/product/image/045/2000706441/IPROS71743930192444748931.png?w=280&h=280)
Casting defects, filling holes, surface preparation before painting, just wait for 30 minutes.
Filling Repair Compound for Castings Simply apply to metal defects such as chips, voids, and scratches on castings and wait for 30 minutes to fill them. It is ideal for surface preparation before painting and for repairing castings. 【Features】 ■ Cures at room temperature in 30 minutes just by mixing and applying the main agent and hardener. No need for electrical or gas equipment, making it suitable for any work location. ■ Black with glitter to resemble castings. Can be polished to a metallic finish with a grinder. 【Capacity】 Main agent: 1kg can or 20kg drum Hardener: 20g bottle or 100g plastic container. For more information, please contact us.
