1～15 item / All 21 items
Thermal bridge reduction for externally insulated composite systems (ETICS) with German general building certification using floating installation methods.
◆Applicable Base Materials - Ordinary concrete, with and without cracks - Perforated bricks - Perforated limestone bricks - Lightweight concrete hollow blocks - Solid limestone bricks - Solid bricks - Other applicable base materials - ALC
Cost-effective fastening with plastic nails.
◆Applicable Base Materials - Concrete - Lightweight concrete porous blocks - Vertical hole bricks - Perforated limestone bricks ◆Applications Fastening the following insulation materials to facades, etc.: - Polyurethane boards - Bonded wood wool lightweight building material boards - Cork boards / coconut fiber mats - PU panels
Installation inside insulation to reduce heat bridges.
◆Applicable Base Materials - Bead method polystyrene foam (EPS) type - Extruded polystyrene foam (XPS) type - Wood fiber type - Rigid polyurethane foam type - Rock wool, etc. ◆Features - Dedicated fastening for direct installation to insulation materials, designed to reduce thermal bridging. - FID ii shape allows for easy installation without pre-drilling through a thin mortar layer, shortening the construction process. - FID ii is a high-load fastener specifically for insulation materials, suitable for thin insulation thicknesses of 60 mm, while FID ii Plus is for thicker insulation thicknesses of 100 mm. - Quick and economical installation using Torx T40.
A versatile hammer set fastening that can also be used for rotational installation.
◆Applicable Base Materials - Ordinary concrete - Solid bricks - Solid limestone bricks - Solid blocks made of lightweight and ordinary concrete - Vertical hole bricks - Hole-punched limestone bricks - Aerated lightweight concrete - ALC ◆Features - Hammer set construction with an option for rotary set installation, termed "termoz CNplus." - Fasteners applicable to various base materials and types of insulation. - Flexible for use, reducing warehouse and order processing. - Quick and simple hammer set construction fasteners allow for the use of electric drivers to readjust fasteners that are too deep during installation. - Using dedicated tool CS for embedded or flush installation. The only fastener with multiple construction methods. - Additionally, rotary installation is set up as an optimal application for soft insulation materials on the surface of insulation. - The thin disk with a thickness of 2.5mm fits perfectly to the insulation, providing a low-cost thin reinforcement layer. High energy efficiency composite nails through embedded rotary installation serve as thermal bridge reduction.
Fire-tested metal insulation fasteners for fire-resistant insulation boards.
- The metal insulation fastener achieves fire resistance performance of F120. It can be used with confidence even in places where fire resistance is required. - The DTM 80 plate (sold separately) for soft insulation materials makes storage easier and allows for cost reduction. - The simple driven installation method shortens the work process and reduces the installation load. - The shaft shape enables installation without pre-drilling into aerated concrete, reducing the installation process by one step. - Made of stainless steel (DHM A2, material 1.4301), it is suitable for outdoor and damp environments. - DHM can also be combined with colored cover caps, enhancing the aesthetic quality of the finish.
Adjustable cover cap for DHM and DHM A2.
This is a high-quality optional cover cap for DHM and DHM A2.
Plastic insulation support DHK 45
● Made of polypropylene ● The serrated shape grips the hole wall during insertion. ● Reduces perforation volume for minimum perforation depth. ● Wide temperature resistance from -40 to 80℃. ● Easy and quick insertion construction. ● Minimal buckling of the shank. ● No additional screws or nails. ● Halogen-free.
Self-drilling screw with dedicated polyamide retaining disk for easy installation of panel building materials.
◆Features - The DHT S dedicated self-drilling screw with a diameter of 4.8mm can be screwed in without a pilot hole, reducing construction effort. - The plug reduces heat conduction, minimizing marks on the finished surface. - The very thin disc shape is used for thin finishing layers and reinforcement layers, providing great flexibility. - Polyamide disc with a diameter of 50mm. ◆Suitable Base Materials - Wood and wood-based building materials - Thin steel plates of 0.8mm or more
Disk used in combination with a 5mm screw.
The Fischer plastic insulation disc HK 36 is a product designed to be used in combination with a 5mm screw. It can be used to secure lightweight insulation boards and films to wooden and wood-based substrates. This flexible plastic disc can accommodate a variety of applications.
Disk used in combination with a 5mm screw.
The Fischer zinc-plated insulating disk HV 36 is a fixing disk used in combination with a 5mm screw. It securely fixes lightweight insulating boards and films to wood and wood-based substrates. The flat-shaped plug disk also allows for the installation of thin finishing materials on top after fixing.
Easy-to-install polyamide fixing discs compatible with panel-type building materials.
The combination of a polyamide support disk and a plastic plug is a product designed to securely fix pressure-resistant insulation materials using wood screws, particle board screws, and self-drilling screws. The combination of insulation fasteners and screws allows for optimal fixation of pressure-resistant insulation materials. Two shaft lengths are available to provide appropriate fastening solutions according to the application.
Economic hammer set-type insulation fastener
- Sleeve-integrated anchor with a plate. - Composite nails (steel tip - plastic head) reduce thermal bridging. *Composite nails are included separately. - Composite nails require several strikes with a hammer. - The 3 mm thick plate fits perfectly into the insulation material, providing a thin reinforcement layer. - The steel tip of the composite nails offers high holding power. - A drill diameter of 8 mm and a shallow effective embedment depth of 25 mm reduce drilling time. - For soft insulation materials, large discs DT 90, DT 110, and DT 140 are combined with the anchor plate.
Standard use economic external insulation hammer-driven fasteners
TermoFix PN is an economical hammer-driven fastener for external insulation designed for standard applications. It can securely fix pressure-resistant insulation materials such as polystyrene, mineral wool, and wood fiber (up to 180mm thick) to substrates like concrete and perforated building materials. It consists of a plate-integrated sleeve and a separate plastic nail, allowing for easy installation by simply hammering it in. This leads to reduced construction time and costs. The design features fiberglass-reinforced plastic nails that minimize the transmission of heat loss.
Securely fixed with any thickness of insulation material! It is possible to fasten all common insulation materials to wood and boards with standard screws.
TermoFix H can securely fasten all common insulation materials to wood and boards with standard screws. By combining different shaft lengths and screw lengths, it can firmly secure insulation of any thickness.
Prevent thermal bridging by installing insulation flush! Insulation fasteners with wood screws.
◆Compatible Base Materials - 3-layer solid wood - MDF plywood - OSB plywood ◆Functions and Usage - Fasteners are installed using a standard Torx T30 bit for flush mounting. - Use the dedicated tool T T S for embedding installation. Screw in the fasteners for precise installation positioning. Insert a separately sold cap into the countersink area to make it flush with the surface of the insulation material. - Rotate the disk of the dedicated tool T T S to make it flush with the surface of the insulation material. Install the fasteners without going too deep.
