Elastomer - メーカー・企業15社の製品一覧とランキング

更新日： 集計期間:Oct 15, 2025～Nov 11, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Elastomerのメーカー・企業ランキング

更新日： 集計期間:Oct 15, 2025～Nov 11, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. カラヤン 本社 Aichi//others
  2. イェットツー・コム・アジア Tokyo//Service Industry
  3. 東和工業 本社 Tokyo//Building materials, supplies and fixtures manufacturers
  4. 4 伸工貿易 Tokyo//Trading company/Wholesale
  5. 5 クラレトレーディング Osaka//Trading company/Wholesale
企業ランキングへ

Elastomerの製品ランキング

更新日： 集計期間:Oct 15, 2025～Nov 11, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. Vibration-absorbing elastomer "Miyafreak Series" カラヤン 本社
  2. Bridging Styrene-Isoprene-Styrene (SIS) イェットツー・コム・アジア
  3. 2-component reaction-type elastomer "Buildan Seal" 東和工業 本社
  4. 4 Thermoplastic elastomer SIS manufactured by SINOPEC. 伸工貿易
  5. 4 Styrene-based thermoplastic elastomer (SBS) Kumho Petrochemical クラレトレーディング

Elastomerの製品一覧

1～15 件を表示 ／ 全 23 件

表示件数
Rapid Hardening Rubber Repair - Belzona 2311 SR Elastomer

Rapid Hardening Rubber Repair - Belzona 2311 SR Elastomer

For emergency repairs. For repairing rubber and bonding metal parts. [Applications] Repairs of conveyor belts, rubber linings, rubber gaskets, etc.

[Overview] This product is a urethane resin with added fillers such as silica and components that promote curing speed, characterized by rapid curing. After curing, it exhibits excellent elasticity and flexibility, making it suitable for a wide range of applications. It is easy to use, as you simply mix the main agent and hardener, both of which are sealed in aluminum packs, in small quantities. *This product is not a toxic substance. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ [Sample Distribution] If you would like a sample, please fill out the application with your intended use and conditions in the "Contact Us" section below and send it. *Please note that we may decline requests based on certain conditions. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

  • glue
  • Reinforcement and repair materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Thermoplastic elastomer SBS, LCY Corporation, Taiwan

Thermoplastic elastomer SBS, LCY Corporation, Taiwan

[Free Sample Available] Ideal for Asphalt Modification! Introduction to Thermoplastic Elastomer SBS.

This is the thermoplastic elastomer SBS from LCY Corporation in Taiwan. There are two types: oil-extended and non-oil-extended, and various grades depending on the mixing ratio of butadiene and styrene. It is suitable for a wide range of applications, including asphalt and plastic modification, shoe soles, and adhesives. ★You can download the grade table from the link below★ 【About LCY Chemical Corporation】 LCY Chemical Corporation is a major chemical manufacturer established in 1965 in Taipei, Taiwan. The company is one of the largest TPE manufacturers in the world, with manufacturing bases in Taiwan, China, and the United States. The group's annual production capacity is 500,000 tons, allowing for the stable supply of high-quality products at low prices. *For more details, please contact us or download the PDF materials to view.*

  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Thermoplastic elastomer SIS manufactured by SINOPEC.

Thermoplastic elastomer SIS manufactured by SINOPEC.

Free samples available! High-performance and low-cost Chinese-made SIS thermoplastic elastomer.

This is a SIS (Styrene-Isoprene-Styrene) thermoplastic elastomer manufactured by BALING, a subsidiary of China's major SINOPEC Group. It is a low-cost product with physical properties equivalent to domestic products. It is ideal for adhesive tapes, sealants, and hot melt applications, and is adopted by major tape manufacturers in North America and Europe. Free samples are also available, so please feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Latest technology: artificial muscles

Latest technology: artificial muscles

The Future of EPAM Artificial Muscles (Polymer Actuators)

The latest technology, artificial muscles, is a joint research project between Waseda University Graduate School and ARV Co., Ltd. When a voltage is applied to the polymer actuators, the electrodes attract each other, causing Maxwell stress to act, which reduces the space between the electrodes. The polymer trapped between them deforms and expands, utilizing this change. For more details, please contact us or refer to the catalog.

  • Other Smart Grid

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
HP Sponge

HP Sponge

Excellent in compressive permanent deformation at room temperature! A sponge made from a special resin foam using unique blending technology.

"HP Sponge" is a groundbreaking product made by foaming resin using our unique blending technology. It has excellent compression set under general environmental conditions, and since it is originally low in specific gravity, it can be further lightweight, making it possible to reduce the weight of the product. Additionally, its low volume resistivity makes it suitable for electrical insulation applications. Moreover, it allows for coloring, which is difficult with general industrial rubber, and can also be extruded into various shapes. 【Features】 ■ Excellent compression set at room temperature ■ Lower carbon dioxide emissions during manufacturing compared to rubber ■ Coloring possible due to being made of resin (upon consultation) ■ Potential for reduced production costs ■ Further lightweighting possible by foaming low specific gravity elastomers ■ Low water absorption, suitable for use as a waterproof packing *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials
  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Presentation of explanatory materials! What is a thermoplastic elastomer?

Presentation of explanatory materials! What is a thermoplastic elastomer?

Next-generation molding materials that combine both cost reduction and environmental conservation!

Thermoplastic elastomers are materials that possess elasticity similar to cross-linked rubber while being moldable with the ease of general-purpose plastics. Additionally, they are noteworthy not only for their cost-effectiveness but also from an environmental conservation perspective, as they can be recycled and have shorter molding processes. Characteristics: - Excellent elasticity similar to cross-linked rubber. - Superior resistance to pressure, cold, ozone, and flow properties. - Excellent resistance to inorganic chemicals such as acids and alkalis. - Approximately 30% lighter compared to cross-linked rubber. - No need for cross-linking, allowing molding with general-purpose injection molding machines. - Cost reduction is possible due to reusability. - Natural color can be colored. - Painting on finished products is possible. This document includes characteristics of rubber cross-linking, comparisons of molding processes, and case studies. If you are interested, please feel free to download the materials or contact us.

  • Concrete wall

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Low-hardness foam elastomer for residential building materials

Low-hardness foam elastomer for residential building materials

The two-layer structure achieves a balance of cushioning, appearance, colorability, and suitability for double-sided tape.

Higashiho is a manufacturer of extruded and shaped extruded products. "Extrusion molding" is a technology that, as the name suggests, "creates shapes by extruding." Utilizing extrusion molding technology, we produce products that can flexibly accommodate various genres. "Low hardness foam elastomers" achieve a balance of cushioning, appearance, colorability, and suitability for double-sided tape through a two-layer structure. Foaming and hollow shapes are also possible. Examples of extrusion molding include: Surface layer: EVA; foam layer: olefin-based elastomer, or Surface layer: olefin-based elastomer, EVA; foam layer: olefin-based elastomer, styrene-based elastomer, and others. *For more details, please download the catalog.

  • Steel construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Soft extruded cover for LED lighting, made of an elastomer with excellent weather resistance and light diffusion properties.

Soft extruded cover for LED lighting, made of an elastomer with excellent weather resistance and light diffusion properties.

Essential for flexible LED lighting! It is a soft acrylic extrusion product with excellent flexibility, transparency, and weather resistance.

Our soft extrusion cover for LED lighting is environmentally friendly, free of plasticizers and halogens, and is an excellent soft acrylic extrusion product with outstanding flexibility, transparency, and weather resistance. We offer a wide range of hardness and light diffusion options, with the ability to produce products with hardness ranging from 60A to 90A. 【Features】 ■ Weather Resistance Excellent for outdoor use due to minimal physical property degradation in outdoor environments. ■ Superior Secondary Processing Good compatibility with double-sided tape and adhesives, making installation easy. ■ Versatility Shapes can be freely created through mold fabrication, and options for diffusion and hardness selection from 60A to 90A are available.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Product Example] Soft Foam Elastomer Two-Color Molding

[Product Example] Soft Foam Elastomer Two-Color Molding

The shape of the mold has a higher degree of freedom compared to rubber, allowing for a wide range of shapes to be formed!

Here is an example of "soft foam elastomer two-color molding." It is a unique soft resin that has rubber-like properties while allowing for the same processing methods as general plastics. The advantages of foam elastomers include the ability to add various colors, recyclability of the resin, and cost reduction through process simplification. Our company supports various extrusion molding challenges, from product planning to OEM and production transfer from other factories. Please feel free to contact us when needed. [Example] ■ Application: Tight materials ■ Material: TPO Foam TPO ■ Precision: ±0.3 ■ Processing method: Extrusion molding of soft resin *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Styrene-based thermoplastic elastomer (SBS) Kumho Petrochemical

Styrene-based thermoplastic elastomer (SBS) Kumho Petrochemical

It has sufficient production capacity and can provide stable supply! It is used worldwide in various fields such as asphalt and polymer modification.

Kumho Petrochemical Co., Ltd. was established in 1970 and has one of the largest synthetic rubber production capacities in the world, operating in various fields such as synthetic resins, specialty chemicals, nanocarbon, energy, and building materials. Kuraray Trading began full-scale handling of the company's products, including synthetic rubber, thermoplastic elastomers (SBS), and polypropylene glycol (PPG), for the Japanese market starting in 2022. Kumho Petrochemical's SBS is a linear/radial block copolymer made from styrene and butadiene, which exhibits high tensile strength and rubber elasticity without cross-linking, and has excellent processability. 【Features】 - Stable supply possible with a rotation close to Japan - Inventory sales system available within Japan - Diverse applications including asphalt and plastic modification, adhesive bonding agents, and footwear *For more details, please refer to the PDF materials or feel free to contact us.

  • Parts and Materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
SEBS (Hydrogenated Styrene-Based Thermoplastic Elastomer)

SEBS (Hydrogenated Styrene-Based Thermoplastic Elastomer)

China SINOPEC Baling Corporation (10% share of the global SEBS market) manufacturing! Reliable quality! Various high-performance grades available for different applications!

Main Uses Compound: Mixed with PP or extender oil for a smooth surface and excellent weather resistance and heat aging resistance in rubber products, used in handles, toys, stationery, etc. Plastic Modification: Used as a compatibilizer for industrial resins (engineering plastics) such as PE and PS. Wire and Cable: Mixed with PP, extender oil, and flame retardants for the production of wires and cables. Adhesives: Used in combination with C5 petroleum resin to produce adhesives and sealants. Asphalt Modification: Improves various physical properties such as softening point and low-temperature characteristics for asphalt paving and waterproofing applications.

  • Reinforcement and repair materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Developing a low-hardness elastomer that fuses with PBT resin.

Developing a low-hardness elastomer that fuses with PBT resin.

Introducing the development status of low-hardness elastomers that can function as waterproof gaskets and buttons!

Integrating multiple materials through injection molding. This is a development concept that we have valued since the establishment of our company. We have been engaged in manufacturing with various combinations such as "resin + resin" or "resin + metal," but there are cases where integration is not possible depending on the combination of materials. Therefore, our company actively collaborates with various material manufacturers, and when existing materials do not meet the specifications required by our customers, we also work on creating custom materials tailored to those needs. *For detailed content of the column, please refer to the related links. For more information, feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
NTW Corporation "Elastomer Division Product Catalog"

NTW Corporation "Elastomer Division Product Catalog"

A wide range of products, including environmentally friendly TPU!

The "Elastomer Division Product Catalog" is the product catalog of NTW Corporation, which primarily engages in the development and sales of thermoplastic polyurethane elastomer raw materials and sheets. It features thermoplastic polyurethane elastomers (TPU) such as "Elastran," as well as "Highgress" and "Eselan," including polyurethane sheets, polyurethane films, and various polyurethane molded products. [Contents] ■ Product lineup handled by the Elastomer Division *For more details, please refer to the catalog or feel free to contact us.*

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Vibration-absorbing elastomer "Miyafreak Series"

Vibration-absorbing elastomer "Miyafreak Series"

Can be molded into various shapes! A high-performance elastomer with excellent shock absorption and vibration damping properties.

The "Miyafreak Series" is a vibration-absorbing elastomer that excels in both shock absorption and vibration damping properties. It has an extremely high vibration absorption capability (with a tanδ (vibration absorption index) at the industry's highest level), low temperature dependence, and excellent shock absorption and vibration damping characteristics. It offers a wide variety of specifications (standard, high-impact, flame-retardant, heat-resistant, oil-resistant, and wear-resistant) and is widely used as a vibration-damping and soundproofing material in various fields, including mobile communication devices, various motors, and inverters. 【Features】 ■ Extremely high vibration absorption capability ■ Low temperature dependence with excellent shock absorption and vibration damping ■ Wide variety of specifications ■ Can be molded into various shapes (2D and 3D shapes) ■ Foam processing and painting processing are also possible ■ To add soundproofing characteristics (resonance point shift), high-density materials are added to ST ■ Environmentally friendly (siloxane-free, RoHS compliant, degassing, REACH compliant) ■ Post-processing is possible (addition of various films, double-sided tape, etc.) *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Plastic extrusion molding resin "olefin-based elastomer"

Plastic extrusion molding resin "olefin-based elastomer"

The compressive permanent strain is in the 30% range! It is a very rubber-like resin with good weather resistance and can also be colored.

At Katsuron, we manufacture extruded products using "olefin-based elastomers." They have excellent weather resistance and can be colored. The compression set is in the 30% range, making it a very rubber-like resin. It has a low specific gravity (below 1), resulting in lightweight products. Since there is almost no impact on acrylic materials, it is also used for securing window frames made of acrylic. It is suitable for car stoppers, window frame packing materials, automotive tubes, and more. Please feel free to contact us when you need assistance. 【Features】 ■ Compression set in the 30% range ■ Very rubber-like resin ■ Excellent weather resistance ■ Can be colored ■ Lightweight ■ Good low-temperature resistance *For more details, please refer to the PDF materials or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.