Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 217 items
Permanent magnet drum-type magnetic separator
Used for sorting and recovering non-ferrous metals such as aluminum from target materials. The internal magnetic poles are fixed while the SUS outer cylinder rotates. Iron pieces are attracted by the built-in magnet from the target materials flowing over the surface of the outer cylinder. Iron pieces are removed with a scraper attached to the outer cylinder.
Cased drum-type magnetic separator
Used for removing iron powder from powdered materials by incorporating a permanent magnet drum-type magnetic separator into a case.
Catch dust that cannot be visually confirmed! A dust concentration meter that ensures safety through continuous monitoring.
The dust monitor continuously measures the dust concentration in the exhaust gases on the secondary side of dust collectors and monitors changes in relative dust levels, outputting alarm contacts and analog signals in case of abnormalities. It detects the frictional static electricity of dust that comes into contact with or passes near the detection probe. It can be easily installed in existing setups and is useful for environmental measures. Additionally, it is equipped with a concentration correction function, allowing for output correction to the dust concentration obtained by JIS measurement methods by adding a correction factor to the detection signal. Changes in dust levels due to leaks or tears in bags can be monitored, and continuous concentration changes can be output at levels close to actual measurements, enabling trend management of dust collector performance to be monitored at values close to JIS measurement methods. Moreover, it has obtained domestic explosion-proof certification, making it usable in first and second category hazardous locations (zone 1.2). ● Domestic production ensures stable supply Maintenance only requires regular cleaning of the probe. ● Low cost with performance equivalent to optical methods Measurement range of 0 to 1000 mg/m³ with 9 range switches. Detectable particle size from 0.3 μm. ● No specialized knowledge required. Range setting and sensitivity adjustment can be easily made with a switch. For more details, please click on the related link or download the catalog.
It is possible to prevent damage to expensive conveyor belts and falling debris, thereby preventing disruptions in the transportation system caused by accidents!
The belt misalignment switch is a protective switch that detects misalignment and wandering of the belt conveyor, issuing alarm signals and emergency stop signals. It can be used to prevent damage to the belt edges and to avoid material spillage due to belt misalignment. The belt misalignment switch is essential for the safe operation of belt conveyors and is widely used in industries such as steel, cement, chemical, and thermal power plants. 【Features】 ● It is designed for outdoor use with an IP67 rating. ● The highly reliable micro switch uses maintenance-free ball bearings and a touch roller that can tilt up to 75°, ensuring a design with functional margin, so it operates reliably even in cases of abnormal belt misalignment and has a long lifespan. ● When the contacts operate, the touch roller does not reset until it returns more than 2° (hysteresis characteristic), preventing repeated opening and closing of the contacts during operation. Therefore, it can protect the belt conveyor with a simple control circuit. *For more details, please download the catalog or contact us.
We will detect vertical tearing accidents of conveyor belts early!
The belt longitudinal tear detector is a switch that instantly detects longitudinal tears in the belt caused by foreign objects penetrating the belt at the chute drop-off point of the belt conveyor and outputs an alarm signal. It consists of a sensor section that detects longitudinal tears and a converter section that outputs cutting signals. The converter is also equipped with a disconnection alarm output that detects cuts in the sensor or cable, ensuring high safety. 【Features】 ● A highly sensitive cable switch is used in the sensor section. The point that is pressed immediately becomes a contact, allowing for instant detection of abnormalities. ● The conductive part of the touch switch is protected by a safety cover, preventing dust and transported materials from adhering, and it is not affected by ozone, infrared, or other influences. ● The detector can be installed without modifying the conveyor belt itself. It can also be installed on operating conveyor lines. *For more details, please download the catalog or contact us.
Quickly resolve the confusion in the conveyor line caused by a shoot blockage!
The chute switch is a device designed to issue an alarm signal and emergency stop the belt conveyor when the chute of a belt conveyor or the chute of a tripper is blocked by transported materials. It is mounted on the side wall of the chute and operates by moving a detection plate due to the side pressure from accumulated materials such as ore. The detection plate is installed using dust-proof bearings, allowing it to move smoothly even if dust adheres to it. To prevent issues caused by condensation, a proximity switch type is also available as an option. The detection operating force can be adjusted from 9.8 N to 14.7 N at the tip of the detection plate. Therefore, the chute switch can be used across a wide range of belt conveyor lines, from small powders to bulk materials.
24-hour filter tear monitoring! Lightweight model at just 0.5 kg.
The dust switch continuously monitors the filter breakage of general-purpose small dust collectors for 24 hours. It quickly detects fine dust during abnormal conditions and alerts you to dust leakage. Similar to a dust monitor, it detects the friction charge of dust that comes into contact with the detection probe. It is an easy-to-install work environment protection switch that is ideal for detecting filter dirt and breakage, as well as for environmental measures. 【Features】 ● Easy installation on general-purpose small dust collectors ● Capable of monitoring filters ● Lightweight and compact, and can be directly integrated into PLCs For more details, please click on the related link or download the catalog.
Industry-leading detection sensitivity! Detection from a bulk density of 0.02g/cm³!
The "MVL Series" is a vibrating level switch capable of stable detection of various powders and granular materials, from fine powders to coarse particles. It is unaffected by changes in temperature, humidity, pressure, dust, or electrical properties. It is easy to adjust, has no moving parts, and boasts excellent durability. Additionally, the housing can rotate approximately 310°, making it easy to adjust the direction of the lead outlet after installation. 【Features】 ■ Detects bulk density from 0.02g/cm3 ■ Standard specifications support a maximum temperature of 150°C ■ Standard specifications use SUS316L material ■ Clearly displays the current status with two-color LEDs even when the cover is closed ■ Adopts a screw-up terminal block ■ Uses a free power supply For more details, please click on the related link or download the catalog.
Pursuing ease of use! Our unique technology prevents malfunctions even with highly adhesive measurements like slurries!
Level switch for detecting upper and lower limits in silos for powders and granules, and tanks for liquids. - No false detection even with highly adhesive slurries, liquids, and powders! - Avoids malfunction due to adhesion with a special electrode structure and control method! - Covers all sensitivities from low to high with one type of substrate, regardless of L dimension! - Easy setup with range switching and volume adjustment! - No moving parts, providing exceptional durability! 【Features】 ■ Two-color LED operation indicator Easy to distinguish between normal and detection states ■ Understand operational status even when the cover is closed Eliminates wasted time ■ Uses screw-up type terminal block Prevents loss of screws ■ Housing rotates approximately 310° Prevents rainwater intrusion ■ Uses free power supply No worries about voltage fluctuations ■ Standard support for up to 150°C For more details, please click on the related link or download the catalog.
Assisting stable operation of the production process! Equipped with enhanced durability detection blades.
We would like to introduce the application examples of the load flow detector 'EFSL-155S' handled by Matsushima Majatech. When there are no items being transported on the conveyor, there may be abnormalities in the upstream processes. Additionally, if the normal transport volume is not flowing, it could significantly impact the downstream processes. This product is suitable for monitoring the status of the conveyor transport line. Its implementation helps ensure stable operations in the production process. 【Example】 ■ Application: Monitoring the transport status of belt conveyors ■ Product introduced: Load flow detector 'EFSL-155S' *For more details, please refer to the PDF materials or feel free to contact us.
The inclinometer "CM-961A" is an inclination sensor that uses a MEMS accelerometer. It features a metal case, making it durable, and has a protection structure of IP-67.
The tilt meter detects using a MEMS accelerometer (MEMS: Micro-Electro-Mechanical Systems). Additionally, it is designed with a metal case to provide shock resistance and vibration resistance. It is compact (compared to our products). The output is available in two types: voltage output type 1-5V and current output type 4-20mA. As an additional feature, it includes a switch function. You can obtain transistor output at any desired tilt position (specified at the time of order). It has a function to correct installation errors, allowing for correction to 0° within a range of ±1°. There is a YouTube video available. Within the CM-900 series, there is also the "CM-936," which outputs a rotation angle of 360° linearly. It outputs the rotation angle from 0 to 360° as DC voltage 1-5V or current 4-20mA (specified at the time of order). For more details, please search for "CM-936" on the Ipros site. *For more information, please contact us or download the PDF document.
Available for use under various measurement conditions! There are many manufacturing specifications for wetted materials and connection standards.
The "HC-8□ Series" is a liquid-type detector used for pH/ORP measurement in closed loops such as piping and sealed tanks, featuring electrodes integrated into an electrode holder. It is available in two shapes: a case (chamber) type that connects to a bypass line via a flange, and an insertion type that connects to the side of piping or tanks using screws or flanges. To accommodate various measurement conditions, there are many options for liquid contact materials and connection standards, as well as a wide variety of combination electrodes. 【Features】 ■ Widely usable from wastewater and sewage treatment facilities to boiler systems and general process control equipment. ■ Offers internal liquid pressurization for cases with process pressure and internal liquid head pressure (sampling type) for cases without process pressure (atmospheric pressure). ■ Model selection is possible based on the connection method to the process line and the measurement conditions such as pressure, temperature, and properties of the sample water. *For more details, please refer to the PDF document or feel free to contact us.
Ultrasonic cleaning methods and brush cleaning methods, etc.! It is possible to select more effective cleaning methods.
Introducing the immersion-type pH/ORP detector with cleaning function, the "□HC-7 series." The pH and ORP electrodes are equipped with glass sensors or platinum sensors, and the sensing components such as the liquid junction and temperature compensation sensor are positioned facing downward. It allows for the selection of a more effective cleaning method suitable for the installation site. Additionally, we offer the immersion-type detector "UHC-7D," which integrates the immersion-type pH/ORP electrode holder with an ultrasonic cleaner. 【□HC-7 Series Various Cleaning Methods】 ■ Ultrasonic cleaning method ■ Brush cleaning method ■ Water jet cleaning method ■ Pulse air jet cleaning method ■ Chemical cleaning method ■ Lift-up jet cleaning method *For more details, please refer to the PDF document or feel free to contact us.
Easy span calibration with a solution! It is also possible to set the electrical conductivity and liquid temperature in an AND/OR configuration.
This product is a panel-type electrical conductivity meter specifically developed for the food industry, designed to be installed in pipelines and tanks of food manufacturing processes for applications such as CIP (Clean-in-Place) management, defoamer control, and liquid level control. It uses a microcomputer for temperature compensation, allowing for accurate temperature compensation over a wide temperature range, and can be set to any desired temperature characteristics. The measurement range features a manual switching method with two ranges, corresponding to the cell constant of the combination detector, allowing selection between 0–300/3000 μS/cm (at 25°C) or 0–20/200 mS/cm (at 25°C). 【Features】 ■ Compact DIN96 size ■ Sanitary electrical conductivity meter for the food industry ■ Installed in pipelines and tanks of food manufacturing processes for use in CIP management, defoamer control, and liquid level control *For more details, please refer to the PDF document or feel free to contact us.
It is a low-cost empty can sorting conveyor with a simple structure.
By installing the sorting table (optional), the sorting rate will improve.
High-speed sorting of steel cans using a powerful magnet.
It is a high-speed processing type with a capacity of 500 kg per hour.
Standard type! Low running costs! Ultra-high sensitivity allows inspection of aluminum packaged products!
It is possible to inspect aluminum packaging, detecting metals in foods such as fresh produce, pickles, prepared dishes, bento boxes, cup noodles, retort foods, and aluminum cans. There is no influence from moisture, salt content, or temperature in the inspected items. Additionally, we also offer a high-sensitivity type "NT3R-K4B." 【Features】 ■ Ultra-high sensitivity, capable of inspecting aluminum packaging ■ No influence from moisture, salt content, or temperature in the inspected items ■ Low running costs ■ NT2R: Standard type ■ NT3R: High-sensitivity type *For more details, please refer to the PDF materials or feel free to contact us.
The installation space expands with a thickness of 15mm!
The FMT-type electromagnetic flow velocity meter detector, which has received great acclaim for experiments in upstream flow and bottom flow velocity measurements in waterways, now comes in a slim type! With a thickness of just 15mm, it has been significantly slimmed down! Its reduced thickness allows for greater installation flexibility compared to the conventional model!
Can detect stainless steel as small as φ0.3mm. Easy operation with a touch panel. Flexible installation is possible, making it easy to coordinate with front and rear devices.
The "MODEL TABLEX-PRO" is the latest metal detector for tablets and capsules manufactured by the UK company Safeline, capable of detecting and ejecting ferrous, non-ferrous, and non-magnetic stainless steel with high precision. It can detect metal as small as φ0.3mm. If ejection does not occur within a certain time after metal detection, an alarm will sound. It features an easy-to-use color touch panel and supports display in 18 languages. The height of the head, tilt angle, and right/left orientation can be adjusted without tools, making it easy to connect with tablet presses and dedusters. Various metal test pieces are also available for sale. 【Features】 ■ Maximum processing capacity of 10,000 pieces per minute ■ Equipped with a log function for ejection data (date and time) ■ Three sizes of openings available according to processing capacity ■ In the event of a power outage, products will be ejected to the reject side until power is restored ■ Suitable for quality control based on 21 CFR part 210, 211, 11 GAMP *For more details about the product, please refer to the <PDF download>.
The multi-single pixel PbS infrared detector consists of 2 to 16 single pixels in a line or matrix design.
trinamiX's multi-single pixel PbS infrared detector consists of 2 to 16 single pixels in a line or matrix design. The detector covers a wide spectral range, making it very useful for applications in inline or mobile process analysis, quality control, and gas detection. Using single pixel detectors provides high flexibility regarding setup and filters.
The multi-pixel PbS detector consists of 2 to 16 pixels in a line or matrix design.
trinamiX's multi-pixel PbS detector consists of 2 to 16 pixels in a line or matrix design. The detector covers a wide spectral range, making it highly relevant for applications in inline or mobile process analysis, quality control, and gas detection.
The installation of a dedicated outdoor shield has made it possible to measure temperature and humidity outdoors.
By equipping a dedicated outdoor shield, the sensor is protected from sunlight and wind and rain, enabling high-precision temperature and humidity measurements outdoors. A highly reliable platinum resistance temperature sensor is used for temperature measurement, while a fast-responding capacitive type is adopted for humidity measurement. In addition to the temperature and humidity type, a humidity-only type is also available. Outputs of DC 0–1 V/0–10 V/4–20 mA are provided, and temperature is output as Pt 100Ω 2-wire. ☆ Measurement range: -30 to +70 °C, 0 to 100 % RH ☆ Power supply: DC 6–30 V
No correction of measurement values is needed for the free expansion of steel due to temperature changes! Surface strain gauge with temperature measurement function.
The "GS-10F, GS-10FT" is a surface strain gauge used for measuring axial forces in cut beams, steel girders, or slurry solidified column piles. A dedicated mounting foot is welded to the object being measured, and the strain gauge body is attached. Since the linear expansion coefficient of the body is manufactured to be the same as that of steel at 11.4×10^-6/℃, there is no need to correct the measurement values due to the free expansion of the steel caused by temperature changes. We also provide mounting feet (anchors) for installation on the surface of concrete. 【Features】 ■ A dedicated mounting foot is welded to the object being measured, and the strain gauge body is attached. ■ The linear expansion coefficient of the body is manufactured to be the same as that of steel at 11.4×10^-6/℃. ■ There is no need to correct the measurement values due to the free expansion of the steel caused by temperature changes. ■ Mounting feet (anchors) for installation on the surface of concrete are also available. *For more details, please refer to the PDF document or feel free to contact us.
Measure brightness quickly in about 1 second! It is possible to detect flickering light with a small S/N ratio of approximately 0.04 cd/m² brightness difference!
The "Color Response Detector RD-80SA" is a key tool for improving the high quality of sequential 3D displays by enabling the detection of crosstalk and the measurement of brightness and color. Active shutter 3D televisions separate the images for the left and right eyes and alternately display them, but there is a phenomenon called crosstalk where each image momentarily leaves a residual image in the opposite eye, causing the visuals to appear blurred or double. For more details, please download the catalog or contact us.
Optimal for measuring output flicker of LED lamps!! Directly sighting the emitting LED.
The Color Response Detector RD-80SA allows for spot measurement while visually aligning the measurement position, enabling response (reaction), brightness, and chromaticity measurements. It can detect crosstalk, which is a key factor in improving the high quality of sequential 3D displays, as well as measure brightness and chromaticity. It can perform response measurements at ultra-fast speeds of less than 80μs and can measure brightness rapidly in about one second. Additionally, it can detect flickering light with a small S/N ratio of approximately 0.04cd/m². It can be used for detecting the response of LED lamp light output flicker, as well as measuring brightness, chromaticity, and color temperature. *For more details, please download the catalog or contact us.*
The manual sorting has been replaced by automated sorting using machines, which offers benefits such as the possibility of reducing labor costs!
The "Aluminum Separator" is a machine that recovers non-ferrous metals such as "aluminum," "copper," and "brass" from crushed processed materials. By rapidly rotating a magnetic rotor with permanent magnets arranged around its circumference, a powerful alternating magnetic field is generated on the surface of the drum. This induces eddy currents in non-ferrous metals like aluminum present in the processed materials being conveyed, allowing for separation through the resulting propulsion force. 【Features】 ■ Capable of recovering valuable materials such as aluminum, copper, and brass from mixed processed materials ■ Reduction of disposal costs ■ Can be sold as mixed metals ■ Transition from manual sorting to automatic sorting using machinery, reducing labor costs ■ Aimed at the removal of non-ferrous metals (aluminum, copper, brass) *For more details, please refer to the PDF document or feel free to contact us!
You can accurately grasp the points behind the walls and floors.
For understanding the location of penetration openings. When constructing penetration openings in walls or floors made of concrete or block, you can determine the exit position of the bit in advance. Conversely, you can also decide the drilling start point from the exit position. For measuring wall and floor thickness. You can check the bit length of the hammer drill and diamond core tools used for constructing penetration openings. For positioning films in X-ray concrete non-destructive testing.
