Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
91～105 item / All 353 items
A running charger that has advanced far beyond the conventional SBXE type.
The DC-DC converter "DC-2440SBXF" is a compact and lightweight on-board charger that has significantly advanced from the conventional SBXE type. It comes with a remote display unit that digitally shows voltage, current, and set voltage, improving visibility. For more details, please download the catalog.
It is a DC converter that efficiently converts a DC 24V system to DC 13.8V.
○ External control terminal: Remote control via engine key linkage or external contact switch ○ Ultra-low standby current: Approximately 80mA, making it very suitable for automotive use due to its minimal power consumption in standby mode. ○ High efficiency: Particularly necessary for valuable batteries, achieving approximately 90% efficiency in power conversion. ○ Dual output: Equipped with multiple terminals for a maximum of 40A and 15A. (However, the total current must be used below 40A) ○ Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again) ○ Low noise: Significantly lower noise than conventional switching converters, allowing use similar to regular power supplies without worrying about noise. ○ Automatic cooling fan: The fan starts when the case temperature exceeds a certain level and automatically stops when the temperature falls below a certain level. ○ Slim design: Despite high current capacity, it is compact and particularly slim. ○ Selected components: Uses high-performance components such as metal film resistors and glass-epoxy boards, specifically selected for industrial use.
This is a DC converter that efficiently converts 12V DC to 27.8V DC.
- Ultra-low standby current: Approximately 150mA, with very low power consumption in standby mode, making it suitable for automotive use. - High efficiency: Especially important for valuable batteries, it achieves approximately 90% efficiency in converting electricity. - Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again.) - Low noise: Significantly lower noise compared to conventional switching converters, allowing for use similar to standard power supplies without worrying about noise. - Slim design: Despite handling high current, it is compact and particularly thin. - Selected components: Uses high-performance components such as metal film resistors and glass-epoxy substrates, specifically selected for industrial use.
It is a DC converter that efficiently converts a DC 48V system to DC 13.8V.
- External control terminal: Remote control via engine key linkage or external contact switch. - High efficiency: It is particularly necessary to convert electricity efficiently in the case of valuable batteries, achieving approximately 90% efficiency. - Dual output: Equipped with multiple terminals for maximum 40A and 1A. (However, the total current must be used below 40A.) - Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again.) - Low noise: Significantly lower noise than conventional switching converters, allowing use without worrying about noise, similar to a regular power supply. - Automatic cooling fan: The fan starts when the case temperature exceeds a certain level and automatically stops when it falls below a certain temperature. - Slim design: Despite high current, it is compact and particularly slim. - Selected components: Uses high-performance components such as metal film resistors and glass-epoxy boards, specifically selected for industrial use.
World's smallest lightweight up/down/cross SDI converter【M_UD】
The 【M_UD】 is an ultra-compact and lightweight micro converter designed with dimensions of 68mm x 59.2mm x 20mm and a weight of 95g, supporting up-conversion, down-conversion, and cross-conversion. It can up-convert input SDI signals from standard definition SD-SDI to high definition HD-SDI, down-convert from HD-SDI to SD-SDI, and perform cross-conversion between HD-SDI signals (such as converting 720p to 1080i). The conversion settings can be selected via the dip switches on the unit from [SD (standard definition)/720p/1080i/1080p], and the output video aspect ratio can be set to "Full/14:9/Pillar (Letter)/Cut." The input voltage supports a wide range from DC 5 to 24V, allowing power supply from various devices via the included AC adapter or USB. Its ultra-compact and lightweight design makes it highly portable, suitable for use in filming and on-site applications.
![Analog to SDI Converter [1000AH]](https://image.www.ipros.com/public/product/image/cf3/2000163543/IPROS9104767761622783071.jpg?w=280&h=280)
Analog to SDI converter with up-conversion function
The 【1000AH】 is a mini converter that converts analog signals (composite/component) into SDI signals. Even if your shooting equipment or playback device only supports analog video output, you can use the 【1000AH】 to convert it into an SDI signal that can be transmitted over long distances. It can be connected to professional monitors, switchers, projectors, and other devices equipped with SDI input terminals. Additionally, it features an up-conversion function that converts the input analog signal to 480i/720p/1080i/1080p. By combining the functions of an analog-to-SDI conversion converter and an up-converter into one device, convenience is enhanced. Furthermore, it is equipped with two SDI output channels and one HDMI output channel for simultaneous output, allowing for connection to multiple devices such as monitoring screens. The input voltage supports a wide range of DC 7 to 24V. In addition to the included AC adapter, it can also be powered by various other devices.
The DC connector is a screw-type that prevents disconnection! It excels in portability and versatility, making it usable in various 4K environments.
This product is a 4K-compatible video and audio signal converter that converts HDMI 2.0 to 12G-SDI, compliant with SMPTE ST2082 for long-distance transmission over a single coaxial cable, and to Quad 3G-SDI for transmitting UHD signals over four coaxial cables. It features one HDMI 2.0 input terminal, two 12G-SDI output terminals, and four 3G-SDI output terminals. It is capable of converting 4K signals input via HDMI 2.0 into both 12G-SDI and Quad 3G-SDI. Additionally, it supports simultaneous output to two 12G-SDI and Quad 3G-SDI, distributing the 4K signal to a total of three outputs. 【Features】 ■ HDMI 2.0 → 12G-SDI/Quad 3G-SDI conversion ■ Simultaneous output to two 12G-SDI and Quad 3G-SDI ■ Anti-pull DC connector adopted *For more details, please refer to the PDF document or feel free to contact us.
Low power consumption and low heat generation, providing stable signal output! Can be used in various settings.
At AD Techno Co., Ltd., we handle various converters manufactured by AVMATRIX. The "Mini Converter Series" includes the 3G-SDI to HDMI mini converter and the HDMI to 3G-SDI mini converter. With an optimized internal circuit board design, it achieves a low power consumption of up to 2W while being capable of continuous operation for 24 hours, making it a reliable choice as a broadcast-quality converter. In addition, we also offer the "3G-SDI/HDMI Scaling Cross Converter" and the "Scaling Converter Series." 【Mini Converter Series Features】 <MINI_SC 1112> ■ SDI input / HDMI output ■ Supports 3G/HD/SD SDI multi-format ■ Equipped with 1 SDI loop output ■ Pocket-sized with a dedicated mount bracket included ■ Compatible with 3G-SDI Level A/B input *For more details, please refer to the PDF materials or feel free to contact us.
We will also introduce our lineup of DC-DC converters for electric vehicles and examples of product applications!
Electric vehicles are equipped with onboard electrical components such as high-voltage batteries, inverters, and motors, and due to space constraints, component mounting has become increasingly dense with each generation. Our DC/DC converters are required to be further miniaturized and lightweight while increasing power capacity. To meet this demand, low-loss designs using soft-switching circuits and high heat dissipation and thermal distribution technologies have been adopted. Additionally, full digital control using DSP enables optimal power management and safety design, as well as communication with higher-level ECUs. This catalog introduces part of the DCDC converter lineup from Shinryo Electric Industry! We have also compiled system proposals for auxiliary power supply for electric vehicles, so please take a look. With the evolution of car electronics leading to increased auxiliary power and advancements in autonomous driving technology, there is a growing demand for high-output DC/DC converters. By using DC/DC converters capable of parallel operation, we can meet the needs for increased auxiliary power. <Currently under development!> We are also advancing the development of high-voltage input products (800V input) tailored to the needs for low voltage input and rapid charging. Please feel free to contact us.
Individually controllable 8 contact outputs! Remote control and monitoring of contact I/O via network.
The "POSE SE10-8A7B1" is a contact converter that performs monitoring and control of network-compatible input/output contacts. It allows for flexible monitoring and control of remote contacts via a browser or email. Using an inline frame in the user HTML area, it is possible to incorporate images from surveillance cameras or control buttons into the surveillance camera footage. 【Features】 ■ Remote contact control and monitoring via network ■ Supports inline frames (iframe) ■ Can send emails to up to 8 locations to notify of abnormal occurrences or changes in power status ■ Annual schedule settings available *For more details, please refer to the PDF document or feel free to contact us.
With two contact inputs, you can freely control the "buzzer sound" and "power"! It's easy and simple to control the power using the contacts.
The "BEADS SE10-B1" is a contact converter that controls an AC100V power supply and a buzzer based on two contact input states. By switching modes when the contacts are ON:ON, ON:OFF, or OFF:OFF, various combinations can be selected to determine the ON and OFF patterns for the power supply and buzzer. It allows for easy and straightforward control of the power supply using contacts, making it suitable for immediate use in security systems, AV systems, and measurement systems. 【Features】 ■ Independent of the network ■ Controls AC100V power supply and buzzer sound based on two contact input states ■ Enables control of power output and buzzer through combinations of sensors and switches or contact outputs from IP cameras and sensors ■ Allows for easy and straightforward control of the power supply using contacts *For more details, please refer to the PDF document or feel free to contact us.
Efficiently guides the moisture from the substrate to the de-aeration device, preventing blisters in the waterproof layer.
The Origintex 802 method involves laying a ventilation sheet between the Origintex and the substrate, efficiently guiding moisture from the substrate to the dehumidification device, and preventing blisters in the waterproof layer. It prevents the waterproof layer from breaking due to movement or cracks in the substrate. Additionally, there are no unpleasant odors during the construction period, ensuring that residents are not disturbed. For more details, please download the catalog.
This is intended to apply a non-use agent epoxy resin to maintain the water quality of stored water.
Origin EP Coat is designed to apply a non-solvent epoxy resin for waterproofing and corrosion protection of concrete water tanks in water supply facilities, as well as to maintain the water quality of stored water. For Origin EP Coat B, please take the epoxy base material and hardener in a container, lightly stir them, then add the powder and mix thoroughly using a hand mixer or similar tool. For more details, please download the catalog.
