Construction method Product List and Ranking from 41 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

Construction method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. 成瀬化学 Mie//Building materials, supplies and fixtures manufacturers
  2. 太洋基礎工業 Aichi//General contractors and subcontractors
  3. 水研 Shiga//Building materials, supplies and fixtures manufacturers
  4. 4 菱建基礎 本社 Tokyo//General contractors and subcontractors
  5. 5 三晃金属工業 Tokyo//General contractors and subcontractors
Go to Company Ranking

Construction method Product ranking

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. Waterproof layer renovation method for achieving the long lifespan of facilities! Narlite injection method. 成瀬化学
  2. Install the valve without stopping the water! 'EM Continuous Water Valve Method' 水研
  3. All casing is entrusted to Ryo Construction Foundation! "All Casing Method" 菱建基礎 本社
  4. 4 Reinforcement of existing beam after hole cutting: "Redouble Method" コンステック
  5. 5 HDD method (induced horizontal drilling) achieves shortened construction time and labor savings! 東洋工務店

Construction method Product List

3826～3840 item / All 4222 items

Displayed results
D-Lite D Board Method ~ 3M × DAIKEN ~

D-Lite D Board Method ~ 3M × DAIKEN ~

Next-generation D-board (wall panel) construction method that balances design quality and processability like wood [non-combustible certification obtained].

The D Board method involves laminating 3M's 3M TM Di-Noc TM film onto a non-combustible substrate in the factory and then installing it on walls at the construction site. The Dailight D Board method uses a non-combustible material called 'Dailight,' made from DAIKEN's mineral fibers and volcanic ash glass materials, as the substrate. *Please refer to the materials below. 【Conventional D Board Method】 By manufacturing all boards in the factory and installing the completed boards, on-site work can be made more efficient. Since processing boards on-site is difficult, precise pre-measurement is necessary for board production. 【Dailight D Board Method】 Layout and board production are done based on drawings. Dailight has very high workability, allowing for on-site processing such as cutting edge boards and touch-up painting, which reduces the pre-measurement process and significantly shortens the overall delivery time. Since there is no film application work on-site, it is also recommended for customers who have never used the conventional D Board method!

  • Other wall materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Must-see for those in the Tohoku area!] Cross-section repair method 'sto dry spray method'

[Must-see for those in the Tohoku area!] Cross-section repair method 'sto dry spray method'

Construction can be completed in a short period! Dry spray method using polymer cement mortar.

The "sto Dry Spray Application Method" is a technique that allows for the repair and reinforcement of concrete structures using a unique silo system, enabling construction to be completed in a short period of time. A device called the spray supply system sprays polymer cement mortar at a high speed of 200 km/h. This method can be applied to various concrete structure repair works, such as cross-section repairs and the thickening of the underside of RC slabs, which were traditionally addressed by plastering methods, filling methods using formwork, and wet spray methods. 【Features】 - Shortened construction period - Reduced running costs - Excellent workability - Improved quality - Registered in the Ministry of Land, Infrastructure, Transport and Tourism's NETIS New Technology Information System *Quick response is available for those in the six prefectures of Tohoku. (Aomori, Iwate, Miyagi, Akita, Yamagata, Fukushima) For more details, please contact us or download the catalog.

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Must-see in the Tohoku region! Cross-section restoration method 'sto dry spray method'

Must-see in the Tohoku region! Cross-section restoration method 'sto dry spray method'

Construction can be completed in a short period! - Reducing construction costs, extending the lifespan of structures, and increasing durability - Dry spraying method using polymer cement mortar.

The "sto Dry Spray Application Method" is a technique that allows for the repair and reinforcement of concrete structures using a unique silo system, enabling construction to be completed in a short period of time. It sprays polymer cement mortar at a high speed of 200 km/h using a spray supply system. This method can be applied to various concrete structure repair projects and the thickening of the underside of RC slabs, which were traditionally addressed using plastering methods, filling methods with formwork, and wet spray methods. - Features Transport distance: Horizontal 300m, Vertical 150m Single layer application thickness: 6mm to 50mm (maximum 100mm) Can be applied under traffic vibrations Finishing with a trowel is possible No mixing work required on-site No issues such as blockage of the pumping hose, allowing for long periods of work interruption Easy to clean No formwork required No primer needed High-quality cross-section formation - Benefits Significant reduction in construction time Cost savings in construction Extension of the lifespan and durability of structures *Quick response is possible for the six prefectures in the Tohoku region. (Aomori, Iwate, Miyagi, Akita, Yamagata, Fukushima) For more details, please contact us or download the catalog.

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Paving Material Laston Clogging Method "Miyabi"

Paving Material Laston Clogging Method "Miyabi"

Laston filling method: Fusion of resin pavement and filling agents, modern-style washout.

Our company handles the paving material "Miyabi" using the Laston filling method. 【Features】 ■ Beautifully blends into both traditional Japanese and modern spaces. ■ A durable floor finishing material that mixes the beauty of resin with the strength of mortar. ■ Reproduces the traditional washing-out technique without the need for water, finished by wiping with a sponge. ■ Combines natural stones (a mix of 2-minute and 3-minute stones) with filling material colors to create a rich and diverse color variation. ＼ For more details, please check "Download Catalog" ／

  • IMG_1125.JPG
  • IMG_0526.JPG
  • 雅　台形.jpg
  • 雅商品荷姿.jpg
  • Plastering and painting work
  • Exterior and paving materials <General>
  • Pavement construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low-pressure resin injection method Tarpan Type 2 method *Same results regardless of who performs the work!!

Low-pressure resin injection method Tarpan Type 2 method *Same results regardless of who performs the work!!

An automatic low-pressure injection method that eliminates variability caused by the operator by relying on the restoring force of the spring, ensuring the same results regardless of who performs the work!

The actual interior of the cracks has a complex shape and is not smooth like an acrylic plate. When injected with a grouting pump, the pressure is high, which speeds up the injection time, but considering the filling ability, high pressure is not necessarily always good. Additionally, in conventional methods, workers could not leave the site until the injection was completed, but with the automatic low-pressure injection method, once the capsule is set in the crack, the worker can leave the site as the operation relies on the spring's restoring force. This allows for a small number of workers to cover a wide area, and the significant feature of this product is that anyone can achieve the same results regardless of who performs the work. 【Features】 ■Ease of handling injection equipment! ■A wide variety of bases! ■Includes flat bases, corner bases, L-shaped joints for narrow widths, and holders, making it adaptable to any site! ■A trusted product featured in the LPIS (Automatic Low-Pressure Resin Injection Method Guidebook)! *For more details, please download the catalog or contact us directly.

  • Renovation and repair methods
  • Architectural design office

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metal Waterproofing Construction Case Photo Collection

Metal Waterproofing Construction Case Photo Collection

We would like to introduce examples of the construction of metal waterproof sky promenades.

The Sky Promenade is a waterproofing method that does not require regular maintenance. While conventional waterproofing requires maintenance every 5 to 10 years, the Sky Promenade is fundamentally maintenance-free. (Please note that drain cleaning is required.) Additionally, due to partnerships with major insurance companies, it comes with a 10-year warranty for standard specifications and a 30-year warranty for high-grade specifications. In recent years, the adoption of this waterproofing method has rapidly increased not only for balconies but also for rooftops. Site information is as follows from the photos on the left: 1. Fukuoka Prefecture (7.7 tsubo) 2. Nagasaki Prefecture (8 tsubo) 3. Ibaraki Prefecture (6.9 tsubo) 4. Aichi Prefecture (116 tsubo) 5. Okayama Prefecture (27 tsubo)

  • Waterproofing work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Setter method for detachable horizontal expandable devices.

Setter method for detachable horizontal expandable devices.

More accurate and easier installation of detachable horizontal expansion devices! A unique construction method that pursues construction efficiency.

The "Setter Method" is a unique technique that ensures the reliable integration of expansion devices and post-poured concrete. It allows for the precise placement and fixation of removable expansion device anchor bolts in the end notch of beams, enabling post-poured concrete to be solidly filled without gaps. 【Features】 ■ Easy to ensure the flatness of the pavement surface and the joint body ■ Accurate positioning of anchor bolts ■ Simple installation and removal of special formwork (Setter) ■ Easy complete pouring and verification of post-poured concrete on the underside of the joint ■ Easy application of leveling material to prevent gaps caused by concrete drying shrinkage *For more details, please download the PDF or feel free to contact us.

  • 脱着式ヨコ型伸縮装置用 セッター工法_02.jpg
  • Bridge Materials
  • Bridge Construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
New Release 【APS Method】

New Release 【APS Method】

This is a construction method for wooden houses that allows anyone to easily install a lath and mortar exterior wall using a ventilation structure.

Instead of using ventilation battens, a special dimple-shaped "Sheet GEO 500" is used to ensure a ventilation layer, and by simply applying the dedicated lath "Metal Rib Type 2 ECO," a mortar substrate can be created. Housing type certification 3-1 for deterioration countermeasures and structural framework has been obtained.

  • Plastering base material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aerospace Next-Generation Communication Standard "TSN for Avionics"

Aerospace Next-Generation Communication Standard "TSN for Avionics"

Full-scale practical application progressing in the United States! It can continue normal operation even in the event of a failure.

We will introduce the features of 'TSN for Avionics,' which is progressing towards practical application, centered around the IEEE in the United States. Based on Ethernet, it allows for the setting of communication priorities and achieves communication with virtually no delay, similar to MIL-STD-1553B. Additionally, with synchronization, a single piece of data can be distributed to multiple devices at the same time, making it possible to realize data fusion tailored to future project needs. There are many other features as well. More details are provided in the related links, so please take a look. 【Features】 ■ Real-time capability ■ Synchronization ■ Redundancy ■ Cybersecurity ■ Wide bandwidth and versatility *For more details, please download the PDF or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Construction Information】Chipping work in narrow areas and complex surface shapes is possible with a rotating lance.

【Construction Information】Chipping work in narrow areas and complex surface shapes is possible with a rotating lance.

For more efficient water jet cutting work on uneven surfaces in narrow spaces, leave it to the rotary lance method!

Introducing the "Rotary Lance" of the Water Jet Lance. The "Rotary Lance" allows for high-efficiency work over a wider area compared to a hand lance by rotating the nozzle at the tip, making it suitable for tasks such as paint removal and surface preparation. 【Features】 <Hand Lance> ■ Enables chipping through ultra-high-pressure water injection from a single-hole nozzle head to the substrate. ■ Using an angle conversion fixture on the lance part allows for chipping in narrow spaces. <Rotary Lance> ■ Air rotary lance suitable for paint removal and surface preparation. ■ By rotating the nozzle at the tip, it enables high-efficiency work over a wide area. *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Information] Streamlining the process of "removing" artificial turf and waterproof layers, etc.

[Construction Information] Streamlining the process of "removing" artificial turf and waterproof layers, etc.

We can perform construction tailored to the site, such as whether or not there is vibration. Leave the "peeling" work to us!

The "HBS-2000" is a ride-on scraper capable of removing waterproofing materials without damaging the base material. Thanks to its high power, it can remove residual asphalt (less than 10mm) as well. The scraper unit can be repositioned to one of three locations: left, center, or right of the machine, and the blade tips are available in 300mm and 150mm sizes (300mm is standard equipment). 【Features】 ■ Ideal for removing waterproof layers from bridges and elevated structures, cushioning materials from stadiums, and FRP flooring from parking lots. ■ Capable of removing waterproofing materials without damaging the base material. ■ High power allows for the removal of residual asphalt (less than 10mm). ■ Achieves labor savings and shortens construction periods. ■ Equipped with an environmentally friendly water-cooled diesel engine. *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Construction Information】Achieving the smoothing and strengthening of concrete floors - Placon Floor

【Construction Information】Achieving the smoothing and strengthening of concrete floors - Placon Floor

You can choose the floor finish according to your purpose! It is also possible to use a polished floor as a design element!

"Placon Floor" is a revolutionary flooring finishing method that directly polishes the concrete substrate to achieve a finished surface. This method polishes the concrete floor to a mirror-like state, enhancing both the gloss that reflects light and the durability of the floor. Additionally, by removing the weak surface layer of the concrete and improving its strength, it prevents whitening. Since this method utilizes the existing concrete as is, there is no need for finishing materials. It can be completed in a shorter time frame compared to painted floors, natural stone, or tiles. Furthermore, there is no curing period required like with painted floors, allowing for immediate business operations after construction (post-polishing). We offer plans tailored to your needs, from roughening to mirror finish. 【Features】 ■ Revolutionary ■ Improved floor durability ■ Significantly reduced construction time ■ Beautiful mirror finish ■ Substantial overall cost reduction *For more details, please refer to the catalog or feel free to contact us.

  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Construction Information】 "Metal Cutting by Diamond Method" Safe Cutting and Dismantling

【Construction Information】 "Metal Cutting by Diamond Method" Safe Cutting and Dismantling

By selecting diamond tools according to the type of metal, it is also possible to reduce the generation of sparks during cutting!

Our "Diamond Method" metal cutting technology can cut and drill various materials, from metal to ultra-high reinforced concrete. Large equipment can be cut and dismantled in a short time, and it is easy to extract solidified iron debris. For example, it is widely used in: - Modifications and construction of machinery related to plants - Petrochemical plants - Steel mills and power plants, etc. Dry cutting using air cooling is possible without using cooling water. During cutting, it can be performed without generating an open flame, and remote operation is feasible, making it a preferred option for many companies as an alternative to gas cutting. 【Features】 ■ Capable of cutting complex shapes ■ Can cut both metal and ultra-high reinforced concrete ■ Dry cutting using air cooling without the use of cooling water ■ Can be performed without generating an open flame during cutting ■ Remote operation allows for flexibility in the work location *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Information] Cutting and drilling structures without using water - Dry diamond method

[Construction Information] Cutting and drilling structures without using water - Dry diamond method

No need for treatment of sludge water during cutting and drilling, and dust is also vacuumed. It is also possible to prevent drainage freezing accidents in cold regions!

Compared to heavy machinery dismantling, the "diamond method" allows for cutting and drilling with low vibration and low noise, and is widely used in civil engineering and construction projects. However, a new problem has arisen: wastewater sludge from the cooling water used during operations contaminates the surrounding environment. The "dry diamond method" is a new technique that eliminates wastewater sludge while taking advantage of the benefits of the diamond method. In demolition and renovation work, where reducing environmental impact is essential, this method will serve as a guideline for the future. 【Features】 ■ ECO method that eliminates wastewater sludge ■ Low noise and low vibration method ■ Prevents accidents caused by wastewater freezing in cold weather operations ■ No need for post-processing; can be treated directly as industrial waste *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Information] Cutting and removal of structures underwater is possible - Underwater Diamond Method

[Construction Information] Cutting and removal of structures underwater is possible - Underwater Diamond Method

Experienced divers carry out all the construction work! We handle a wide range of highly specialized underwater construction!

Reliable technology backed by proven results is essential for underwater work, which often comes with many constraints. Our company has undertaken numerous projects based on diamond cutting methods in underwater construction, earning a high level of trust. We handle a wide range of underwater tasks, including cutting, drilling, and anchoring. Please feel free to consult us when considering underwater construction. 【Features】 ■ Capable of various underwater construction tasks, including cutting and drilling using underwater diamond methods ■ Peace of mind with our experienced and specialized staff with a wealth of achievements ■ Implementation of safe and reliable construction using new equipment and technology *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Construction method

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.