CAD(制御) - List of Manufacturers, Suppliers, Companies and Products

CAD Product List

1～15 item / All 21 items

Displayed results
Achieving parallel consideration of mechanics and control! 3D CAD suitable for automotive equipment design.

Achieving parallel consideration of mechanics and control! 3D CAD suitable for automotive equipment design.

Achieving front-loading in automotive equipment development, including control and robot verification! Ultra-fast response 3D CAD that smoothly handles large-scale data.

In the automotive industry, there is a demand for the rapid market introduction of new vehicles, which requires the development of automotive production equipment with short lead times and high quality. Additionally, not only mechanical design but also PLC simulation of equipment and welding robot simulation are becoming more complex, leading to efforts for pre-validation using simulators. However, general simulation software requires conversion of CAD data, which necessitates reconfiguration of mechanisms and IO information each time there is a design change. This makes it difficult to conduct parallel considerations in line with design progress, and many customers may have given up on this. To solve this issue, it is important to achieve control debugging and robot simulation directly on 3D CAD. COLMINA Design and Manufacturing Support iCAD SX can handle vast amounts of data, including operation and control information of large-scale models, with ultra-fast response times of processing 3 million parts in 0.2 seconds. It allows for control debugging and robot simulation directly on CAD. This enables an earlier start on control design, shortening the equipment development period and achieving front-loading. ▶ A special site is currently offering limited access to <case studies>! 　　 ↓↓↓

  • Other CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Explanation] Supervised by the developer: "Shortening L/T of equipment development through collaboration between mechanics and control."

[Explanation] Supervised by the developer: "Shortening L/T of equipment development through collaboration between mechanics and control."

Analysis of rework occurring during the installation of mechanical equipment - A comprehensive explanation from concurrent control design to the end! 【*Free technical materials supervised by the developer are currently available!】

Deep dive into the challenges and background of control debugging conducted during machine installation. We will explain the concepts for realizing 'Manufacturing DX,' which can solve issues related to tight deadlines, such as the concurrent design of control systems and simulation methods utilizing 3D data. 【Do you have these concerns?】 ◆ The machine behaves unexpectedly and gets damaged ◆ Additional specifications arise during installation, requiring overtime work ◆ The preparation for control simulators is difficult, leading to abandonment 【Overview of the publication】 ◆ Challenges in control design aimed at shortening manufacturing lead time ◆ Identifying additional specifications that arise during installation in advance ◆ Considerations for preliminary discussions at the design stage and practical application in real operations 【How to download】 * You can obtain it from the [PDF Download] at the bottom of the text.

  • Other CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Securing Talent and Preventing Attrition with Electric Control Design CAD 'ACAD-DENKI'

Securing Talent and Preventing Attrition with Electric Control Design CAD 'ACAD-DENKI'

It is easy to introduce because it inherits the feel of AutoCAD in .dwg format. It contributes to improving the work environment to stop the outflow of personnel through business efficiency.

■Do you have any of these concerns? The workload is increasing, and the burden on each employee is significant. Since drawings are created using general-purpose CAD, checking and parts aggregation are done manually. The electrical control design CAD "ACAD-DENKI" is an add-on application developed by our company, which has been involved in electrical control design as a developer for 35 years. Compared to drawing with conventional general-purpose CAD, it enables improved drawing efficiency and data utilization in subsequent processes, streamlining operations. By reducing the burden on each employee, it is possible to improve the working environment. As it is an AutoCAD/BricsCAD-based add-on application, there is little confusion in operation if you are familiar with general-purpose CAD, and the startup after implementation is not difficult. As a result, it can address the challenges faced by the manufacturing industry as a whole, such as "securing talent and preventing talent outflow." For more details, please refer to the product page and catalog.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bi-monthly ACAD-DENKI Utilization Webinar

Bi-monthly ACAD-DENKI Utilization Webinar

Support from circuit diagram design to panel manufacturing! Improve electrical control design operations with the CAD system "ACAD-DENKI" for electrical and control design!

We will hold a webinar titled 'Utilizing ACAD-DENKI' that strongly supports everything from circuit diagram design to panel manufacturing collaboration. "Although I am using ACAD-DENKI, there are still many business challenges remaining..." "It seems there are more issues that could be resolved with ACAD-DENKI's features, but I am not fully utilizing it..." Do you have such concerns? In this webinar, we will share how to utilize ACAD-DENKI from the perspectives of speeding up drawing, improving accuracy, and data utilization. Please feel free to apply. [Overview] ■ Date and Time: Please check the next schedule on this page. https://www.alfatech.jp/seminar/acad-denki_webinar2.html ■ Method: Online via Zoom ■ Participation Fee: Free (Pre-registration required) ■ Capacity: 20 participants ■ Application Deadline: Three days before the event date (Please note that registration may close before the deadline if the capacity is reached) *For more details, please refer to the related links or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
What is the 3D CAD required for semiconductor manufacturing equipment design?

What is the 3D CAD required for semiconductor manufacturing equipment design?

3D CAD that achieves a reduction in lead time for semiconductor equipment development! Realizing ultra-fast response capable of handling 3 million parts in 0.2 seconds.

In recent years, the development of semiconductor manufacturing equipment has seen a significant increase in the complexity of required functions, resulting in a vast number of components being handled. Consequently, the biggest challenge has become how to efficiently arrange various mechanical devices within a limited space. 'iCAD SX V8' is a domestically developed 3D CAD specialized for mechanical design, created to support Japanese manufacturing. iCAD achieves high-speed response, capable of handling 3 million components in 0.2 seconds, allowing for stress-free design consideration and verification of the entire semiconductor manufacturing equipment, which can involve tens of thousands of parts. Leveraging its ability to manage vast amounts of information, it is possible to accumulate and utilize all necessary design information for equipment development, including piping, wiring, and control (movement), into a single CAD data set. This single data set can be used across various scenarios and departments, from design to manufacturing, assembly, and maintenance. *Case studies from semiconductor manufacturing equipment manufacturers are available for limited viewing on a special website. Please click the link below to download.

  • Other CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
AutoCAD Electrical

AutoCAD Electrical

A variety of features that assist in electrical design are standard equipment.

"AutoCAD Electrical" is a product sold as part of "ONLY ONE.AutoCAD." as an electrical control design CAD. Not only does it assist in drawing electrical diagrams, but it also features automated processing functions such as bulk updating of title blocks, reference handling, and data aggregation and checking, which can prevent design errors and improve productivity. However, to effectively utilize these functions, designers need basic knowledge of this product. We encourage you to take advantage of our services, including operational training, inquiry support, and data creation. [Support Content] ■ Training ■ Starter Kit ■ Apps ■ Support *For more details, please download the PDF or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electrical and Control Design CAD System "ACAD-DENKI"

Electrical and Control Design CAD System "ACAD-DENKI"

[Case Studies and Demo Videos Available] Solve challenges with specialized features packed with 35 years of know-how and the familiar operation feel inherited from AutoCAD/BricsCAD!

■Do you have any of these concerns? - Checking drawings and counting parts on paper takes a lot of time and is prone to errors. - Work by multiple people leads to inconsistent writing styles. - Unable to respond to short delivery times or link data to manufacturing. "ACAD-DENKI" is an electrical CAD developed by our company, which has been supporting electrical design for 35 years, and is compatible with the industry-standard DWG format. 【Achieving cost reduction and increased productivity】 Users have given high praise for the familiar operation and rich features inherited from AutoCAD and BricsCAD. It facilitates not only reuse design but also smooth collaboration between different departments. The launch is supported by various support menus from experienced staff, ensuring peace of mind. Customization is available! ■Features ▼Full utilization of electrical-specific functions for increased efficiency - Various wiring inputs (automatic generation of intersection marks, automatic wire cutting, special wiring) - Symbol input (symbol palette, pattern registration and input) - Line number input, IO diagrams, terminal block tables, panel diagrams creation - Continuous printing ▼Significant efficiency improvements and prevention of errors through automatic processing functions - Relay and jumper wire calling - Drawing check function ▼Output of wiring connection information list - From-To list and external terminal list output function

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Standardization of Design Operations and Collaboration with Manufacturing through the Utilization of Parts Master

[Case Study] Standardization of Design Operations and Collaboration with Manufacturing through the Utilization of Parts Master

Successful early cultivation of the groundwork for realizing DX through efforts to improve the efficiency of electrical design utilizing data.

Implementing Company: Aimu Manufacturing Co., Ltd. Business Description: Design/Manufacturing/Test Operation of Control Devices and Distribution Boards ■Challenges Before Implementation Operations and management were paper-based without providing attribute information to drawings. Standardization of design was not achieved. There was a complete reliance on customization, leading to a lack of scalability. ■Reasons for Introducing ACAD-DENKI Ability to use drawing functions of AutoCAD/BricsCAD, providing high flexibility and ease of implementation on-site. Data utilization through the provision of attribute information is possible. A wide range of built-in standard functions allows for operation without relying on customization. ■Specific Initiatives Improved search efficiency through the addition of properties. Organized parts master, with manual input limited to order elements only. Integration with parts procurement sheets and production management systems. Collaboration with manufacturing for equipment label data, etc. ■Effects As a result of these initiatives, a reduction of 14 to 20 hours of labor per order was achieved. Manual tasks were eliminated, leading to improved accuracy, standardization of work, and increased efficiency. From this experience, a foundation for utilizing data over manual work has been cultivated within the company for the past ten years, enabling smooth progress towards digital transformation (DX) without resistance.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CAD for electrical and control design "ACAD-DENKI" for DWG.

CAD for electrical and control design "ACAD-DENKI" for DWG.

[Case Studies and Demo Videos Available] Achieve smooth design and manufacturing from electrical diagram creation to 2D/3D panel design, length measurement processing, and output to processing machines!

Do you have any of these concerns? - Checking drawings and counting parts on paper takes a lot of time and is prone to errors. - There are many missed checks on circuit diagrams, layout diagrams, and parts lists. - Relying on skilled staff to create manufacturing instructions. ▼ What ACAD-DENKI can do 〇 Achieve significant efficiency improvements and prevent errors through automated processing features. - Relay and jumper wire calls - Drawing check function - Create layout diagrams and parts lists based on circuit diagrams 〇 Output necessary information for manufacturing instructions to eliminate dependency on specific individuals. - From-To list and external terminal list output functions - Display processing holes and duct lengths on outline drawings 〇 Fully utilize electrical-specific functions to enhance efficiency. - Various wiring inputs (automatic generation of intersection marks, automatic wire cutting, special wiring) - Symbol input (symbol palette, pattern registration and input) - Line number input, IO diagrams, terminal block tables, panel diagrams creation - Continuous printing 〇 Operations tailored to the customer's design environment are possible. - Start-up is supported by experienced staff through various support menus for peace of mind. - Customization is also available! ▼ We also cover other necessary functions for electrical design. For detailed features, including case studies and operation demos, please check the PDF materials. ▼

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Reduction of design man-hours and utilization of data for subsequent processes such as procurement/manufacturing.

[Case Study] Reduction of design man-hours and utilization of data for subsequent processes such as procurement/manufacturing.

Contributing to the reduction of mistakes and losses in design operations, pursuing cost reduction and cost-effectiveness of existing electrical CAD, and utilizing design data for subsequent processes.

Introduction of the case study for the electrical and control design CAD system "ACAD-DENKI" Mitsuba Electric Industry Co., Ltd. faced two major challenges: 1. Improving the quality of manufacturing drawings raised by the manufacturing department during the production design process. 2. Issues related to licensing costs. By implementing our developed and sold electrical design CAD "ACAD-DENKI," they achieved a reduction in design man-hours and enabled the utilization of data for subsequent processes such as procurement and manufacturing. Through repeated proof-of-concept experiments leveraging the 3D capabilities of the base CAD, BricsCAD, further data integration is being advanced. [Challenges before implementation] - Reducing mistakes and losses in design operations - Cost reduction of existing electrical CAD and pursuit of cost-effectiveness - Utilization of design data for subsequent processes *For more details, please refer to the related links or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wiring Support System Implementation Case: Nikko Electronic Industries Co., Ltd.

Wiring Support System Implementation Case: Nikko Electronic Industries Co., Ltd.

Improvements were sought on the theme of "efficiency and cost reduction in the processes from design to manufacturing," so we introduced the Zuken Alphatech / panel wiring support system!

We are introducing the purpose of implementation (background of implementation), the reasons for choosing our system, and the effects of implementation. Originally, our main business was the design and manufacturing of control panels for our parent company, Nikko Co., Ltd. However, with the aim of future business expansion, we began manufacturing distribution boards and control panels for other companies' products. Nevertheless, since we were latecomers in the market for other companies' products, competitiveness became an issue. The management requested improvements with the theme of "efficiency and cost reduction in the processes from design to manufacturing," and the design group spent time gathering information while going through trial and error. ▼ Reasons for choosing Zuken Alphatech / Panel Wiring Support System - As a manufacturer (development/sales/support) of electrical control CAD, they had many years of experience and achievements. - Through our own verification before implementation, we identified the potential for a system that could achieve "efficiency from design to manufacturing." - A consistent support system was prepared from design to manufacturing operations, and they provided accurate support from the pre-implementation stage. Please check the actual implementation effects through the related links below. For product details, please refer to the catalog.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
What is 3D CAD that realizes shorter delivery times and higher quality for machine tools and processing machines?

What is 3D CAD that realizes shorter delivery times and higher quality for machine tools and processing machines?

Reduce rework in the later stages! A 3D CAD that can detect and correct defects during the design phase.

Currently, in the market for machine tools and processing machines, there is an increasing demand for high-quality products with short delivery times. Instead of repeatedly prototyping to ensure quality, it is important to discover and correct defects during the design phase to reduce rework. iCAD achieves high-speed response capable of handling 3 million parts in 0.2 seconds. It can manage the entire assembly even for large machine tools, accumulating and utilizing various information, including motion and electrical/control data. For example, confirming movements through device models and utilizing electrical circuit diagrams for automatic wiring routing allows considerations that were traditionally done with physical machines to be conducted during the design phase. This prevents damage to actual machines due to dynamic interference and increases in man-hours due to on-site wiring path adjustments, enabling the production of high-quality machines with short delivery times. ＼ Customer case studies are exclusively available on the <Special Site>! ／ 　▶ Click on the Special Site and download now! 　　↓↓↓

  • Other CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"ACAD-DENKI 2023" New Feature Introduction Part 1

"ACAD-DENKI 2023" New Feature Introduction Part 1

The drawing management feature "Denki Cabin" of ACAD-DENKI has evolved.

Do you have any of these concerns? - Setting up hierarchy for drawing management is cumbersome. - Manually moving/copying subfolders/files during hierarchy setup. By using the new features of ACAD-DENKI's drawing management function "Denkiabi," you can reduce such manual tasks and streamline your work. For more details, please check our company website or download the document "New Features Detailed Explanation."

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Video Explanation] Basic Knowledge of Electrical CAD - ACAD-DENKI Operation Explanation

[Video Explanation] Basic Knowledge of Electrical CAD - ACAD-DENKI Operation Explanation

"I want to eliminate omissions in circuit diagrams, layout diagrams, and parts lists." "I want to streamline the creation of equipment layout tables." We will solve such challenges.

=【Features Being Introduced】=== 1. ACAD-Parts Component Aggregation (Playback Time: 3:30) ■Solving the following issues: - Want to streamline component aggregation - Want to streamline the verification of circuit diagrams, layout diagrams, and parts lists 2. Relay Processing (Playback Time: 4:25) ■Solving the following issues: - Want to streamline relay processing - Want to streamline the creation of equipment deployment tables ================== To watch the video, please download the PDF document below. File Name: "Solving Issues with 'Component Aggregation' and 'Relay Processing' - ACAD-DENKI Introduction Movie [Watch the video from the link in the PDF]"

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[User Case] Wiring Support System Implementation Achieves Efficiency

[User Case] Wiring Support System Implementation Achieves Efficiency

Effects of Introducing the Wiring Support System: Shortened delivery times! Improved quality! Cost reduction! We will introduce examples of increased efficiency!

**Client** Manufacturer of distribution boards/control panels/operation panels: Company N **Background of Wiring Support System Implementation** The parent company primarily engaged in the design and manufacturing of operation panels, but aimed to expand its business in the future by undertaking the production of distribution boards/control panels from other companies. However, since they were latecomers in the market for other companies' products, competitiveness became an issue. The management requested improvements focused on "efficiency and cost reduction in the processes from design to manufacturing," leading the design group to spend time gathering information while going through trial and error. During this time, they participated in a seminar introducing the wiring support system hosted by Alphatech and became convinced that successful implementation would yield significant benefits, leading to its adoption. **Reasons for Choosing the Wiring Support System** - The manufacturer of the electrical control CAD had many years of experience and a proven track record in development, sales, and support. - Through in-house verification before implementation, they identified the potential for a system that could achieve "efficiency from design to manufacturing." - A consistent support system was prepared from design to manufacturing operations, providing accurate support from the pre-implementation stage.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to CAD

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.