BAG Product List and Ranking from 154 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.

BAG Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.

  1. インターアクション Osaka//Building materials, supplies and fixtures manufacturers
  2. ドレイン工業 Aichi//Building materials, supplies and fixtures manufacturers
  3. 東洋アクアテック Kanagawa//Facility Design Office
  4. 4 キシムラ Kanagawa//Service Industry
  5. 5 菊地シート工業 Osaka//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

BAG Product ranking

Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.

  1. Level 1-2 Asbestos Use 0.15mm Thick Yellow Polyethylene Bag - Large インターアクション
  2. Large sandbags made from natural hemp fibers! Embedded type that does not require removal. ドレイン工業
  3. Emergency Drinking Water Bag "Aqua Bag" 東洋アクアテック
  4. 4 Mortar bag for mountain retaining wall filling キシムラ
  5. 5 Safety measures against smoke and fire from lithium-ion batteries! Heat-resistant fireproof bag. 菊地シート工業

BAG Product List

331～345 item / All 405 items

Displayed results
[Partner Product Example] Aluminum Coated Bag

[Partner Product Example] Aluminum Coated Bag

Introduction of a case where a wrinkle-free bag was achieved by being careful from the previous process.

Here is a case study for Kyoto T. Large-sized aluminum vapor-deposited films are very prone to wrinkling, and when side seal processing is performed, the conditions become even more likely to cause wrinkles. However, there was a request to somehow create bags without wrinkles. Even with similar machines, it is possible to reduce wrinkling by changing the way they are used. Additionally, the condition of the film also affects the outcome, so by being careful from the earlier stages of the process, we were able to finish the bags without wrinkles. [Case Overview] ■ Partner: Kyoto T ■ Product: Aluminum vapor-deposited bags *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Partner Product Example] OPP Bags with Tape

[Partner Product Example] OPP Bags with Tape

We propose a change of tape! We have prepared several types of OPP bags with tape to meet your needs.

Here is a case study for Mr. Y in Iwate Prefecture. When we received an inquiry by phone and asked about the intended use, we learned that he was looking for bags to hold tenugui (Japanese hand towels) and was searching for a company that could produce them in small quantities. He found our website and called us. After hearing that he would be opening and closing the bags several times, we suggested a change in tape, and he placed an order. We offer several types of tape-sealed OPP bags tailored to our customers' needs. If you let us know your intended use, we can recommend the most suitable tape-sealed OPP bags, so please feel free to contact us. [Case Overview] ■ Client: Mr. Y in Iwate Prefecture ■ Product: Tape-sealed OPP bags *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Partner Product Example] Bags for PET Bottle Promotional Items

[Partner Product Example] Bags for PET Bottle Promotional Items

The strength has been tested through sample submission! We were able to reduce the price compared to conventional methods.

Here is a case study for Mr. H in Osaka Prefecture. He inquired about wanting promotional bags attached to PET bottles. Since it was for promotional use, he wanted to keep the price low and was concerned that the items might fall out with regular bags. Therefore, we created the header part using only ultrasonic sealing without inserting a core. This allowed us to reduce the price compared to conventional methods. The strength has been tested with sample submissions. To address the risk of items falling out, we proposed a Type B bag, where the insertion part for the product is positioned at the top, instead of a Type A bag. *The PET bottle in the photo is different from the actual product. [Case Overview] ■ Partner: Mr. H in Osaka Prefecture ■ Product: Bags for PET bottle promotional items *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Partner Product Example] Heavy-Duty Shoulder Drop Header Bag

[Partner Product Example] Heavy-Duty Shoulder Drop Header Bag

An example of how a specialized blade has made it possible to narrow the width and neatly accommodate even thick items.

We received a request stating, 'I want to include thicker items. Until now, we have been using standard shoulder drop header bags, which are fine for the top, but the tape part does not adhere well, making it inefficient, so I would like you to find a solution.' In addition to the standard shoulder drop bags, we have made it possible to neatly accommodate thicker items by narrowing the bottom with a specialized blade and adding slits. To cut the bottom, a straight blade is inefficient, so we created a specialized blade. [Case Overview] ■ Partner: Nara Prefecture ■ Product: Shoulder drop header bag for thick items *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Partner Product Example] Bag with Cut-off Gusset

[Partner Product Example] Bag with Cut-off Gusset

Ultimately, by cutting off the margins of the two parts, work efficiency improved!

Here is a case study for Company A in Saitama Prefecture. They were struggling with wanting to "neatly pack thick boxes" and found that "using regular gusseted bags resulted in inefficiencies due to excess space when folding and closing the lid." They sent actual boxes, and we created samples multiple times. Ultimately, by cutting off the excess space at the lid, we improved work efficiency. [Case Overview] ■ Partner: Company A, Saitama Prefecture ■ Product: Cut-off gusseted bags *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Partner Company Bag Case] 'Delivery Bag' Suitable for Packing Small Packages

[Partner Company Bag Case] 'Delivery Bag' Suitable for Packing Small Packages

Both arranging raw materials through our company and bringing in raw materials by the customer are possible! We accept both products and processing!

〈Features of the Bag〉 【Water Resistance】 It is designed to be strong against rain and dirt. 【Reduction of Packaging Burden】 It is thinner than cardboard, allowing for cheaper shipping costs for products. 【Confidentiality】 The adhesive strength of the tape is strong, and once sealed, it cannot be opened without tearing the bag. Additionally, the interior is black-colored, preventing visibility from the outside, which enables privacy protection. *Security tape options are also available separately. 〈Available Range〉 Thickness: 0.06–0.08mm Size: 150mm×250mm + 40mm to 500mm×600mm + 50mm *There may be slight variations depending on whether printing is included. Gusset: 15mm–60mm (supports thickness up to 0.07mm) We are open to discussing quantities and delivery times, so please feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Partner Company Bag Production Case】Turning Customer Requests into Reality - Innovations in Sealing Openings

【Partner Company Bag Production Case】Turning Customer Requests into Reality - Innovations in Sealing Openings

We will provide suggestions based on the display method and contents. *Free samples are currently available.

There are two types of hanging bags: bottom-loading and top-loading. This time, we would like to introduce a customer's request, stating, "I am worried that the products will fall out of the bag since I will be putting heavy items in it..." It is quite rare for the bottom-loading type of hanging bag to experience product drop due to temperature changes or the passage of time. Conversely, with the top-loading type, the film itself supports the weight of the product, eliminating concerns about dropping. For this reason, we proposed the top-loading bag to the customer. They were satisfied with our suggestion, and we proceeded to a formal order. Additionally, there are other advantages to the top-loading type: - It can hold heavier items compared to the bottom-loading type. - It can accommodate thicker products by adding a bottom gusset. On the other hand, the advantages of the bottom-loading type include: - It is easier to load products. - Depending on the product size, the main body can be folded back, allowing for flexibility in vertical size. You can choose according to your preferences and intended use. If you have any questions, please feel free to use our inquiry form or contact us by phone.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Partner Company Bagging Example】 A Perfect Collaboration of Divider Seal and Punching Position

【Partner Company Bagging Example】 A Perfect Collaboration of Divider Seal and Punching Position

Solving the problem of "tilting that occurs when hanging products"!

As for the design of OPP bags, there are many customers who request punch holes. The purposes vary, such as holes for displaying products in stores or for attaching to PET bottles for promotional use. This time, we would like to introduce a bag that solves the problem of products tilting when suspended during display. Typically, punch holes are often made in the center, but this time we created the hole off to one side. The position of the hole can be accurately determined by discussing the dimensions on all sides, allowing us to create the hole in the correct location. However, as it stands, the product may still move inside the bag, and the tilting issue cannot be resolved. This is where partition seals come into play. By applying a partition seal on the opposite side of the punch hole, we can prevent the product from moving significantly within the bag, and by placing the product on the side with the punch hole, we can also prevent tilting. For customers, it is very important to showcase the product in a way that enhances its appeal. Our company will provide proposals and bags that meet such customer needs!

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Partner Company Bag Case] Shoulder-Drop Header Bag Considerate of Product Appearance

[Partner Company Bag Case] Shoulder-Drop Header Bag Considerate of Product Appearance

Focusing on how to display products, achieving a good fit between the product and the bag, as well as ease of display!

Our products typically feature bags with corners on all four sides, but this time we incorporated a shoulder drop processing based on the following customer requests: 1. For a bag that holds a lunch box, we want to ensure that the corners at the top of the bag do not protrude when the product is placed inside. 2. We want to improve the visual appeal as much as possible when arranging the products. These were the two main points. Now, regarding the shoulder drop processing, when inserting thicker products, it is usually necessary to set the header portion longer than the width of the product. However, this increases unnecessary parts of the bag and distorts its shape, taking up extra space during display. Therefore, we decided to apply the shoulder drop processing. We made the header portion smaller than the product width from the beginning and cut both ends of the upper part of the header diagonally. This allows us to achieve a fit that matches the product size and eliminate unnecessary margins in the bag, increasing the number of different types that can be displayed in one location from three to four. In fact, bags with shoulder drop processing save about 10-20% more space compared to regular bags. We are happy to provide proposals that meet various customer needs, so please feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Partner Company Bag Example】 OPP Bags Utilizing the Benefits of Cubed Cutting Processing

【Partner Company Bag Example】 OPP Bags Utilizing the Benefits of Cubed Cutting Processing

By applying corner cutting processing, we achieve greater efficiency in the bag sealing operation! *Free samples available.

This time, we would like to introduce a case study of a bag with corner cutting processing applied to the flap part. In sealing operations, there are methods that use glue on the flap part and those that use tape such as cellophane tape. 1. When sealing with glue for products of a certain thickness: If the flap part shifts even slightly from the main body of the bag, the glue may protrude from the bag and stick to other products. 2. When sealing with cellophane tape for products of a certain thickness: If the tape is not applied all the way to the edges, it may peel up, resulting in an unsightly appearance. (Applying tape to the edges increases the width of tape used and makes it more cumbersome to remove.) The solution to the above issues is "corner cutting processing." For point 1, even if the seal shifts slightly from a straight position, it can prevent the flap part from protruding from the main body of the bag. For point 2, it reduces excess material, minimizes the width of the tape used, and allows for a neat seal. Our company strives to provide proposals that enable aftercare for bagging operations after the bag products reach our customers.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Partner Company Bag Case] Focus on Appearance with Matte Film!

[Partner Company Bag Case] Focus on Appearance with Matte Film!

You can enhance the presentation of products using the film you choose.

There are various types of films used for bag-making, and this time we would like to introduce a bag-making case using matte film. We received a request from a customer stating, "We want to improve the visibility of products displayed outdoors, as sunlight makes them difficult to see due to reflections." While regular OPP film enhances the appearance of products due to its high transparency, this transparency also makes light reflections more noticeable. In response to the customer's request, we decided to use a matte film, which is different from regular films. Matte film, also known as non-gloss film, helps to soften light reflections and significantly improves product visibility. However, it should be noted that it does not completely eliminate reflections. Additionally, matte film has a calm atmosphere and offers a more luxurious feel compared to regular films. In this case, we used OPP matte film alone, but it is also possible to laminate it with CPP film for bag-making. Starting with the material of the film proposed this time, our experienced staff will provide suggestions on specifications and processing methods that will satisfy our customers.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
OEM production of OPP bags that you can trust and leave to us with peace of mind.

OEM production of OPP bags that you can trust and leave to us with peace of mind.

We achieve customer satisfaction through a wide range of capabilities and comprehensive services provided by OEM production. *Free samples are currently available.

When considering producing packaging materials in-house, there are various challenges such as the burden of capital investment in machinery and buildings, as well as securing personnel. In this context, it has become common to adopt "OEM production." Our company is equipped with abundant machinery and technical expertise, allowing us to confidently accept OEM production orders. In fact, we have a proven track record of handling numerous OEM productions to date. Additionally, our ability to handle all processes, including printing and lamination, in a single order is one of the reasons you can trust us with your needs. <Benefits of entrusting us> ◆ Production is possible while reducing production costs such as capital investment and human resource investment. ◆ Since we maintain our own equipment, we can accommodate various types of bag production and provide flexible responses tailored to the timing, such as shortening delivery times. ◆ We can enter into contracts in advance and accommodate confidentiality agreements. ◆ We can also arrange other packaging materials (such as polyethylene bags). <We can fulfill requests like these> - I want to request printing. - I want to do lamination. - I want to create custom-made bags. - I want to place a small lot order. - I want samples of bags. Please feel free to contact us for more details.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
OP sheet and special bag

OP sheet and special bag

For OP sheets and special bags, contact our company! Double-sided embossed sheets are popular for high-quality raw ham, sukiyaki, and shabu-shabu.

We handle not only special sheets like double-sided embossed sheets but also standard OP sheets (such as those used in dental clinics) and OP small rolls. The double-sided embossed sheets (shown in the photo) are well-received in processing sites due to their ease of peeling during use as well as their excellent workability during processing and packaging when products are wrapped in sheet form. Additionally, we offer special bags (such as deformable bags, adhesive bags, and zipper bags), lamination processing, and processing of laminated products. With our extensive experience and rich connections in this field, we can assist in solving our customers' challenges. Please feel free to contact us. *For more details, please do not hesitate to inquire.

  • Subsidiary materials
  • Other store equipment and supplies
  • Other commercial buildings and service facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Static Electricity Prevention Series

Static Electricity Prevention Series

Cutting and sealing processing, coloring is also possible. This is a groundbreaking product that exhibits anti-static effects!

Introducing our anti-static series. 【ELEX101 (Anti-static Bag)】 - Exhibits excellent anti-static effects due to a specially formulated conductive material. - Protects products without dust adhesion. - Transparent film allows for content verification. 【SuperELEX (Non-contaminating Anti-static Bag)】 - Provides anti-static effects from its plastic resin structure. - Non-contaminating, does not damage or contaminate contents. - Free from carcinogens, sulfides, chlorides, and halogens. 【Conductive Elite, Conductive FIBC (Conductive Polyethylene)】 - Good openness for easy handling. - Prevents dust explosions. - No stickiness or bleeding, additives do not leach out. *For more details, please download the PDF or contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Soil biodegradable freshness preservation bag

Soil biodegradable freshness preservation bag

Returns to the soil after 36 months! Can be reused as a freshness preservation bag until collection!

Our company has completed the development of a new raw material master batch for the "biodegradable (soil) + freshness preservation bag," which will help address the microplastic problem, in collaboration with "Nature Grace Co., Ltd.," the manufacturer of the plant extract essence "Bansei." We have also started sales of this product. This product can be used as a freshness preservation bag for one year after molding and will return to the soil after the remaining 24 months. The duration can be adjusted according to requests. Additionally, by returning to the soil, the reduced soil can lead to a decrease in the use of pesticides and chemicals. 【Features】 ■ Food waste reduction ■ Waste reduction ■ Suppression of soil oxidation ■ Crop production in the reduced soil ■ Reduction in the use of pesticides and chemicals *For more details, please refer to the PDF materials or feel free to contact us.

  • Packaging materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to BAG

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.