batteryの製品一覧
- 分類：battery
3421～3465 件を表示 ／ 全 4011 件
Clear visibility with transparent glass! Recommended for store and building entrances.
- Disaster prevention fittings
- Entrance/Exterior Doors
![[Information] Enax Corporation Comp...](https://image.www.ipros.com/public/product/image/82d/2000653894/IPROS24008023819435132493.png?w=280&h=280){kind=small}
Proposing suitable "solutions"! Featuring high-performance battery development and business models, etc.
- Batteries and Capacitors
- others
![[Case Study] Elimination of connect...](https://image.www.ipros.com/public/product/image/eb6/2000653434/IPROS06087947504023937604.png?w=280&h=280){kind=small}
Color-coded with colored hard anodizing! Changed the material of the connection part from conventional stainless steel to aluminum.
- Parts and Materials
Since the products are shipped after inspection, you can use them immediately upon arrival!
- Other Batteries
This DC power supply is a new model developed based on our previously well-received high-reliability DC battery power supply.
- Batteries and Capacitors
Built-in Sirocco fan! With a direct continuous discharge ignition device, ignition can be reliably achieved!
- Manufacturing Equipment
We boast an enormous number of construction achievements across the country! [Presentation of construction achievement list]
- Measurement and Inspection
Supports a wide range of load requirements! An expandable portable battery system for disaster BCP measures.
- Batteries and Capacitors
HPP-2000, which protects peripheral electronic devices and network equipment from the inrush current of printers.
The portable power HPP-2000 can issue certificates related to the Small and Medium-sized Enterprise Management Strengthening Act. When turning on copiers and printers or waking them from standby mode, inrush current occurs. Inrush current refers to a large current that flows momentarily, typically several times to over ten times the normal current. In the case of printers, inrush current may also occur during printing. When inrush current occurs, the power supply voltage fluctuates and becomes unstable, affecting PCs and network devices connected to the same circuit breaker. In the case of tenant buildings, the available electrical capacity is almost determined by the area of the rented space, so caution is necessary. After executing print processing, if the server suddenly stops, attention must be paid to the circuit breaker installed in the DX environment.
The discharge time (usage time) is 15.4 hours! Introducing the operating status after the lithium replacement.
- Batteries and Capacitors
![[Lithium Case Study] Paper Manufact...](https://image.www.ipros.com/public/product/image/d4a/2000651822/IPROS03429674052036542769.png?w=280&h=280){kind=small}
79% cost reduction! It is calculated that it will extend to 15 years if converted to lithium-ion batteries.
- Batteries and Capacitors
Leave it to us for everything from chemical analysis and physical testing to reliability testing! Introduction to our measurement and evaluation services.
- Other services and technologies
- Measurement and Inspection
Poisson's ratio measurement
We would like to introduce the Poisson's ratio measurement conducted by our company. Poisson's ratio is the ratio of longitudinal strain to lateral strain that occurs when a load is applied to an object, and it is necessary for strength calculations of materials. We offer Poisson's ratio measurement and strength measurement through tensile testing. Please feel free to consult with us.
![[Lithium Case Study] Cardboard Fact...](https://image.www.ipros.com/public/product/image/651/2000651826/IPROS84718908796535220926.png?w=280&h=280){kind=small}
24-hour operation without a backup battery! By extending battery life, reduce battery costs!
- Batteries and Capacitors
If the operating hours are to be increased compared to the current situation, the use of a rapid charger is recommended! - Example of a -25℃ freezer warehouse
- Batteries and Capacitors
Costs for water replenishment operations and purified water can also be reduced! Due to its long lifespan, you can save over 70% in annual costs.
- Batteries and Capacitors
![[Case Study of Lithium] Trial at Be...](https://image.www.ipros.com/public/product/image/80c/2000651825/IPROS04987511814672622465.png?w=280&h=280){kind=small}
The recommended lithium-ion battery is 280Ah! It has a lifespan of about 15 years (annual cost reduction of 65%).
- Batteries and Capacitors
After the lithium exchange, there was a case where the discharge time (usage time) reached a maximum of 16.8 hours for 24-hour operation.
- Batteries and Capacitors
Comparison of 560Ah and 280Ah Lithium: Case Study of Lithium-Ion Battery Replacement Service for Forklifts
- Batteries and Capacitors
After the lithium exchange, there was a case where operations were conducted from 6 AM to 6 PM with a break time of approximately 1.5 hours.
- Batteries and Capacitors
Using a fast charger, charge approximately 6 times a day! A case where it became possible to operate with one unit instead of two.
- Batteries and Capacitors
Equipped with a 280Ah lithium battery on the 7FBR30! A case where it can operate for 8 to 11 hours with additional charging during the day.
- Batteries and Capacitors
Consideration of fluctuations in workload and cases where charging time cannot be taken! Operable for 24 hours without battery replacement.
- Batteries and Capacitors
Introducing the monitoring results where the forklift was used for a maximum of 11.7 hours with 16 hours of operation (2 shifts).
- Batteries and Capacitors
It was determined that a battery capacity of about half is sufficient! This is an example of recommending the introduction of a fast charger in anticipation of a busy period.
- Batteries and Capacitors
A case of replacing the original battery of a tricycle used in the printing industry with lithium, which needs to be replaced every 4 to 5 years!
- Batteries and Capacitors
![[Lithium Case Study] Forklift in Me...](https://image.www.ipros.com/public/product/image/a6e/2000651027/IPROS58170378023724009518.png?w=280&h=280){kind=small}
You can use it for three times longer than a lead battery of the same capacity! Here’s the story of switching to a lithium-ion battery.
- Batteries and Capacitors
For improving the environment of factories and warehouses!
- Manufacturing Equipment
A case recommending the introduction of lithium-ion batteries and fast chargers, considering continuous operation during peak periods.
- Batteries and Capacitors
![[Lithium Case Study] Metal Waste Tr...](https://image.www.ipros.com/public/product/image/196/2000651019/IPROS27441347130182835634.png?w=280&h=280){kind=small}
Discharge is around 250A, and lithium is suitable for rotating forks! Here are some usage examples.
- Batteries and Capacitors
A case study where the operational time has become shorter compared to past performance, now allowing for 19.5 hours of operation per day.
- Batteries and Capacitors
An example of introducing lithium as a backup battery for a 2-ton reach truck that requires battery replacement every four years.
- Batteries and Capacitors
Key-on time is up to a maximum of 24 hours a day! We will introduce the operational status after 6 months and 1 year and 3 months post-implementation.
- Batteries and Capacitors
A case study where the operating hours have become significantly shorter compared to past performance (8 hours/day).
- Batteries and Capacitors
The operating status after the lithium exchange is equivalent to past performance! The lead battery had a load exceeding its capacity.
- Batteries and Capacitors
Examples of implementation that became possible with "lithium-ion battery + rapid charger."
- Batteries and Capacitors
Introducing a verification example that concluded a single battery can operate for up to approximately 20 hours!
- Batteries and Capacitors
Attention users operating with backup lead batteries! We will introduce a case study of operations in a 24-hour refrigerated warehouse.
- Batteries and Capacitors
[Free rental available] Safe, high quality, and easy maintenance with non-contact! Reduces CO2 significantly with no solder waste.
- Work tools
- Manufacturing Equipment
Environmentally friendly long-lasting battery!
- Batteries and Capacitors
- Other Hydrogen/Fuel Cells
Solving common challenges in machine design! For those looking for standard battery packs for power applications.
- Other Batteries
- others
For those who are struggling with wanting to freely adjust the load! We will design it according to your needs!
- Parts and Materials
- others
Introducing measures for work from below and splash prevention from the sides, tailored to the conditions of the site and construction!
- Manufacturing Equipment
- others
Detailed information on "the purpose of preliminary compression," "calculation methods," and "unnecessary cases" is provided!
- Manufacturing Equipment
- others
In the case of repairs, ultra-rapid hardening concrete is used! Here are three points to make expansion joints last longer.
- Manufacturing Equipment
- others
The water resistance greatly varies depending on the ground cover! A detailed explanation of the shapes and types of ground cover!
- Manufacturing Equipment
- others
A clear explanation of the damage caused by noise and the causes of noise generation! We will also introduce inspection methods.
- Manufacturing Equipment
- others
Related to automotive and aerospace applications! How to meet advanced drop weight impact testing requirements!
- Parts and Materials