List of Gates, walls and fences products

The impact on neighboring residents is minimal, and the seismic reinforcement work can be completed in a short period!

• Gates, walls and fences

A case where the conventional site space has been maintained even after installation!

• Gates, walls and fences

It is inconspicuous in appearance and neat! The image of the gate so far remains the same.

• Gates, walls and fences
• Fences and gateposts

The lattice material for the roof decoration and the downlights were installed during manufacturing along with the ceiling siding as supplied items!

• Gates, walls and fences
• Fences and gateposts

The general gate and boundary fence are both made of a steel frame structure! Designed with a slit processing incorporated into the design.

• Gates, walls and fences
• Fences and gateposts

The installation time is about 4 hours! Here is an example of a general gate that was installed by connecting and integrating with pipes.

• Gates, walls and fences
• Fences and gateposts

A design with a rounded roof! Manufactured in a shape that appears to split the structure front and back, and connected on-site.

• Gates, walls and fences
• Fences and gateposts

Delivery boxes and electrical conduits are installed with supplied materials during manufacturing in the factory! Introducing construction examples.

• Gates, walls and fences
• Fences and gateposts

The sense of pressure unique to large gates has been reduced! An example of a luxurious closed exterior structure.

• Gates, walls and fences
• Fences and gateposts

By unifying the height, a sense of cohesion is enhanced, creating an elegant entrance that highlights the beauty of white and wood grain!

• Gates, walls and fences
• Fences and gateposts

Manufactured and delivered as one unit! Designed with consideration to ensure that the steel base does not interfere with gate posts and meters.

• Gates, walls and fences
• Fences and gateposts

Designed to fit the shape of the site! A case where columns, beams, and the entrance gate were manufactured separately and connected on-site.

• Gates, walls and fences
• Fences and gateposts

W8,050×H3,455mm (at the highest point)! A design where the height changes from the tall pillar towards the entrance.

• Gates, walls and fences
• Fences and gateposts

Designed with consideration for the arrangement of the steel frame base! A simple and smart closed exterior.

• Gates, walls and fences
• Fences and gateposts

A case manufactured with a design that allows the shutter case to be visible from the back!

• Gates, walls and fences
• Fences and gateposts

A gate with a sense of unity and cohesion in a design that adds variation! Introducing construction examples.

• Gates, walls and fences
• Fences and gateposts

The upper part of the general-purpose door adopts a slab roof! Designed to allow rainwater treatment through a drain.

• Gates, walls and fences
• Fences and gateposts

Large structure approximately W10,000×H3,125×D1,130mm! Installation work will be completed in about 5 to 6 hours.

• Gates, walls and fences
• Fences and gateposts

The total length is approximately W10,450 × H2,925mm! A case where a chic impression of the gate area has been completed.

• Gates, walls and fences
• Fences and gateposts

The universal door has a slab roof! It features a shutter exposure type structure with the shutter case visible from the back.

• Gates, walls and fences
• Fences and gateposts

Manufactured separately! Here we introduce a case where delivery was made on the same day and connection work was carried out on-site.

• Gates, walls and fences
• Fences and gateposts

Due to the large body, it is manufactured in parts! Electrical wiring for delivery boxes and lighting is installed within the factory.

• Gates, walls and fences
• Fences and gateposts

The ceiling of the general-purpose door was installed with supplied downlights! This is a case where waterproof substrate was applied and delivered.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where work was carried out in an orderly manner and installation was completed in a short time.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where painting was done only on the part where the neighboring block wall touches within the factory.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where the roof of the shutter gate was made slightly larger at 150mm.

• Gates, walls and fences
• Fences and gateposts

Approximately W6,350×H2,925mm, installation time is about 3 hours! Exposed type shutter case structure.

• Gates, walls and fences
• Fences and gateposts

Introduction of a construction case where columns and beams were manufactured separately and connected on-site.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where a shutter gate was installed that allows a camper van to enter and exit a private residence.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where FIT GATE was installed to effectively utilize space that would otherwise be dead space.

• Gates, walls and fences
• Fences and gateposts

We will introduce a case where each building was manufactured as a single unit and connection work was carried out on-site.

• Gates, walls and fences
• Fences and gateposts

The pipe shutter is installed and shipped within the factory. Installation work will be carried out after arrival at the site.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where the body setup was divided into two days, with approximately 3 to 4 hours of setup each day.

• Gates, walls and fences
• Fences and gateposts

For the large gate, the columns, beams, and side walls are manufactured separately and assembled on-site.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where delivery was made directly to the site with one unit and installation was completed in a short time of about 2 hours.

• Gates, walls and fences
• Fences and gateposts

Approximately W6,280 × H2,600mm, installation time is about 3 hours! Introduction of a case where the FIT GATE was installed.

• Gates, walls and fences
• Fences and gateposts

Introduction of a construction example where natural wood sliding doors create a natural impression around the gate.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where columns and beams were manufactured separately for a large gate and assembled on-site.

• Gates, walls and fences
• Fences and gateposts

The protruding roof in front has been fitted with downlights supplied during manufacturing.

• Gates, walls and fences
• Fences and gateposts

Approximately W9,400×H3,700mm (including the roof) with an installation time of about 6 hours! Introduction of FIT GATE construction examples.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where the upper part of a column extended from the roof was divided and connected on-site.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where the wooden frame type 1 and shutter gate were installed together in approximately 4 hours.

• Gates, walls and fences
• Fences and gateposts

Introduction of a case where only the column part extended from the right side of the roof was manufactured in sections and connected on-site.

• Gates, walls and fences
• Fences and gateposts

This is a P-type fall prevention fence that blends well with the landscape, made from recycled wood called Seco Wood.

• Gates, walls and fences

This is a P-type fall prevention fence that blends well with the landscape, made from recycled wood called Seco Wood.

• Gates, walls and fences