List of Surveying, measuring and analysis equipment products

Are you putting off the "soundproofing and sound absorption" in your office? We are offering a document that explains the key points for improvement and the issues that can be resolved.

• Soundproofing/Shielding Unit

It can be quickly implemented in existing facilities such as outdoor areas and lockers where securing power is difficult. Rental options help reduce the costs of implementation and operation.

• Attendance management system

It is possible to measure micro differential pressure within a range of ±5000Pa in accordance with wind speed, air volume, and temperature measurements.

• Anemometer

It is a hot-wire anemometer that can measure wind speed, air volume, and temperature.

• Anemometer

This is an arbitrary waveform function generator that uses DDS technology with frequency bandwidths of 5MHz, 12MHz, and 25MHz.

• Other measuring instruments
• Electrical Equipment Testing

This anemometer is capable of measuring strong winds up to 45 m/s.

• Anemometer

The GPD-2303S/3303S/4303S is a series of DC power supplies with interfaces that are independent (isolated) for each channel.

• DC Power Supply
• Other measuring instruments

Wind speed can be displayed in m/s, km/h, knots, mph, and ft/min.

• Anemometer

Frequency setting resolution: This is a series regulator power supply equipped with an LCD display that has a full range of 0.1Hz.

• DC Power Supply
• Other measuring instruments

This is an AC/DC withstand voltage/insulation testing machine that is safe and accurate, based on various global safety standards.

• Harbor Construction
• Other measuring instruments
• Electrical Equipment Testing

The slump test apparatus C-273 is the most common testing device for measuring the consistency of mixed concrete.

• Work tools
• Geological Survey
• Other measuring instruments

The Washington Air Meter C-280 is a device for measuring the air content in fresh concrete, allowing for easy direct reading of air content and accurate testing.

• Concrete curing material
• Other measuring instruments

The Funnel Clay Meter S-251 is a simple flow-type clay meter for muddy water, used to measure funnel viscosity.

• Pile and foundation work
• Geological Survey
• Other measuring instruments

The S-252 is a mud density measuring device that allows for easy measurement on-site through screw adjustment.

• Other civil engineering works
• Geological Survey
• Other measuring instruments

C-320 conducts fluidity tests for injection mortar used in pre-packed concrete.

• Concrete Machinery
• Geological Survey
• Other measuring instruments

C-321, also known as JP-Roat, is a fluidity tester for PC grout.

• Geological Survey
• Other measuring instruments
• grout

It is a simple field density measuring device that complies with the Japan Highway Public Corporation standards, has a wide application range for the ground, and offers high measurement accuracy.

• Geological Survey
• Other measuring instruments

The MT160 is an ultrasonic thickness gauge capable of measuring thick materials, including metals, plastics, ceramics, composite materials, epoxy, and glass.

• Non-destructive testing
• Other measuring instruments

It is possible to measure a wide range of materials such as plastics, ceramics, composite materials, epoxy resins, and glass, which conduct ultrasound.

• Non-destructive testing
• Other measuring instruments

TM8812 is an ultrasonic thickness gauge with a measurement range of 1.0mm to 200mm.

• Non-destructive testing
• Other measuring instruments

The MCT200 is a thickness gauge of the electromagnetic induction and eddy current type that can measure non-magnetic coatings on magnetic material substrates.

• Non-destructive testing
• Other measuring instruments

TM8811 is an ultrasonic thickness gauge used in the machinery manufacturing industry and for measuring corrosion, with a measurement range of 1.2mm to 200mm.

• Non-destructive testing
• Other measuring instruments

Measure the surface roughness of the processed parts of various machines, calculate the corresponding parameters based on the measurement conditions, and display all the measurement parameters.

• Non-destructive testing
• Other measuring instruments

The SRT6223 is a surface contour gauge specifically designed to accurately measure the peaks and valleys of blast-finished surfaces.

• Metalwork
• Non-destructive testing
• Other measuring instruments

Wide-range measurement (-200 to 1370°C, depending on the sensor used) is possible.

• Other measuring instruments

It is a full-color handheld oscilloscope equipped with a DMM.

• Other measuring instruments
• Electrical Equipment Testing

This is a digital handheld oscilloscope equipped with true RMS measurement function.

• Other measuring instruments
• Electrical Equipment Testing

This is a hardness tester for rubber and plastic that can measure soft plastics, rubber, synthetic rubber, silicone, vinyl, felt, leather, and more.

• Safety and consumables
• Non-destructive testing
• Other measuring instruments

The portable hardness tester HM6560 features a probe separation design, allowing for quick measurements across a wide range and the ability to perform multiple point measurements on large workpieces.

• Metalwork
• Non-destructive testing
• Other measuring instruments

Measurements can be taken from any angle, even upside down, with a wide measurement range, allowing for the hardness of all metal materials to be measured.

• Non-destructive testing
• Other measuring instruments

Display all hardness scales HRB, HRC, HV, HB, HS, and HL directly, and show three prominent hardness scales.

• Non-destructive testing
• Other measuring instruments

A compact plastic case suitable for harsh working conditions, this portable hardness tester can measure at any angle, even upside down.

• Non-destructive testing
• Other measuring instruments

This is an ultra-precise ultrasonic thickness gauge with a minimum measurement thickness of 0.15mm and a resolution of 0.001mm. It is ideal for measuring the thickness of thin materials.

• Non-destructive testing
• Other measuring instruments

TM8812C is a compact ultrasonic thickness gauge with a measurement range of 1.0mm to 200mm.

• Non-destructive testing
• Other measuring instruments

The TH-803 is a hygrometer that can automatically record a wide range of temperature and humidity, equipped with an alarm function that sounds an alarm at maximum and minimum temperature and humidity ...

• Other measuring instruments

This is a thermometer and hygrometer that can display the current temperature digitally and switch between a 24-hour or 7-day recording chart.

• Other measuring instruments

The measurement range is a temperature recorder that can be selected from the ranges of -50 to +50℃, 0 to +50℃, 0 to +100℃, +50 to +100℃, and 0 to +250℃.

• Other measuring instruments

The TS-30K is a compact electronic scale for special purposes, integrated with a carrying case, designed for concrete, asphalt, and soil.

• Concrete curing material
• Other measuring instruments

The GM-12K is a special-purpose electronic scale for fresh concrete, asphalt, and soil, powered by dry batteries.

• Concrete curing material
• Other measuring instruments

The GMW-12K is a special-purpose electronic scale for ready-mixed concrete, asphalt, and soil. It is equipped with two types of hold functions tailored to different applications.

• Concrete curing material
• Other measuring instruments

This is a specific gravity meter that is optimal for quality control in measuring the specific gravity of rubber and plastic. It has a capacity of 220g and a minimum display of 0.01g.

• Weighing scale
• Other measuring instruments

CGX is a counting scale that allows for easy counting tasks with sample functions. It is available in capacities of 16kg, 30kg, and 60kg.

• Weighing scale
• Other measuring instruments

S-207 is a field density measuring device that conforms to the "Density Test Method for Soil by Sand Replacement" specified in JIS A 1214.

• Pipeline Construction
• Geological Survey
• Other measuring instruments

The Cone Penetrometer S-217 is the easiest to operate and portable static cone penetration testing device.

• Pile and foundation work
• Geological Survey
• Other measuring instruments

It is made based on JIS A 1221 and is applicable to all soil layers excluding gravel as an auxiliary method for standard penetration tests.

• Pile and foundation work
• Geological Survey
• Other measuring instruments

The S-213 soil penetration testing device is a compact and lightweight penetration testing machine developed by the Civil Engineering Research Institute for slope investigation.

• Dam construction
• Geological Survey
• Other measuring instruments