List of Surveying, measuring and analysis equipment products

This is a noise calibrator used to generate accurate sound for the operation check and calibration of a sound level meter.

• Other analytical equipment

This is a high-performance arbitrary waveform function generator that employs DDS technology with frequency bandwidths of 5MHz, 12MHz, and 25MHz.

• Other measuring instruments
• Electrical Equipment Testing

It is possible to measure micro differential pressure within a range of ±5000Pa in accordance with wind speed, air volume, and temperature measurements.

• Anemometer

It is a hot-wire anemometer that can measure wind speed, air volume, and temperature.

• Anemometer

This is an arbitrary waveform function generator that uses DDS technology with frequency bandwidths of 5MHz, 12MHz, and 25MHz.

• Other measuring instruments
• Electrical Equipment Testing

This anemometer is capable of measuring strong winds up to 45 m/s.

• Anemometer

The GPD-2303S/3303S/4303S is a series of DC power supplies with interfaces that are independent (isolated) for each channel.

• DC Power Supply
• Other measuring instruments

Wind speed can be displayed in m/s, km/h, knots, mph, and ft/min.

• Anemometer

Frequency setting resolution: This is a series regulator power supply equipped with an LCD display that has a full range of 0.1Hz.

• DC Power Supply
• Other measuring instruments

This is an AC/DC withstand voltage/insulation testing machine that is safe and accurate, based on various global safety standards.

• Harbor Construction
• Other measuring instruments
• Electrical Equipment Testing

The slump test apparatus C-273 is the most common testing device for measuring the consistency of mixed concrete.

• Work tools
• Geological Survey
• Other measuring instruments

The Washington Air Meter C-280 is a device for measuring the air content in fresh concrete, allowing for easy direct reading of air content and accurate testing.

• Concrete curing material
• Other measuring instruments

The Funnel Clay Meter S-251 is a simple flow-type clay meter for muddy water, used to measure funnel viscosity.

• Pile and foundation work
• Geological Survey
• Other measuring instruments

The S-252 is a mud density measuring device that allows for easy measurement on-site through screw adjustment.

• Other civil engineering works
• Geological Survey
• Other measuring instruments

C-320 conducts fluidity tests for injection mortar used in pre-packed concrete.

• Concrete Machinery
• Geological Survey
• Other measuring instruments

C-321, also known as JP-Roat, is a fluidity tester for PC grout.

• Geological Survey
• Other measuring instruments
• grout

It is a simple field density measuring device that complies with the Japan Highway Public Corporation standards, has a wide application range for the ground, and offers high measurement accuracy.

• Geological Survey
• Other measuring instruments

The MT160 is an ultrasonic thickness gauge capable of measuring thick materials, including metals, plastics, ceramics, composite materials, epoxy, and glass.

• Non-destructive testing
• Other measuring instruments

It is possible to measure a wide range of materials such as plastics, ceramics, composite materials, epoxy resins, and glass, which conduct ultrasound.

• Non-destructive testing
• Other measuring instruments

TM8812 is an ultrasonic thickness gauge with a measurement range of 1.0mm to 200mm.

• Non-destructive testing
• Other measuring instruments

The MCT200 is a thickness gauge of the electromagnetic induction and eddy current type that can measure non-magnetic coatings on magnetic material substrates.

• Non-destructive testing
• Other measuring instruments

TM8811 is an ultrasonic thickness gauge used in the machinery manufacturing industry and for measuring corrosion, with a measurement range of 1.2mm to 200mm.

• Non-destructive testing
• Other measuring instruments

Measure the surface roughness of the processed parts of various machines, calculate the corresponding parameters based on the measurement conditions, and display all the measurement parameters.

• Non-destructive testing
• Other measuring instruments

The SRT6223 is a surface contour gauge specifically designed to accurately measure the peaks and valleys of blast-finished surfaces.

• Metalwork
• Non-destructive testing
• Other measuring instruments

Wide-range measurement (-200 to 1370°C, depending on the sensor used) is possible.

• Other measuring instruments

It is a full-color handheld oscilloscope equipped with a DMM.

• Other measuring instruments
• Electrical Equipment Testing

This is a digital handheld oscilloscope equipped with true RMS measurement function.

• Other measuring instruments
• Electrical Equipment Testing

This is a hardness tester for rubber and plastic that can measure soft plastics, rubber, synthetic rubber, silicone, vinyl, felt, leather, and more.

• Safety and consumables
• Non-destructive testing
• Other measuring instruments

The portable hardness tester HM6560 features a probe separation design, allowing for quick measurements across a wide range and the ability to perform multiple point measurements on large workpieces.

• Metalwork
• Non-destructive testing
• Other measuring instruments

Measurements can be taken from any angle, even upside down, with a wide measurement range, allowing for the hardness of all metal materials to be measured.

• Non-destructive testing
• Other measuring instruments

Display all hardness scales HRB, HRC, HV, HB, HS, and HL directly, and show three prominent hardness scales.

• Non-destructive testing
• Other measuring instruments

A compact plastic case suitable for harsh working conditions, this portable hardness tester can measure at any angle, even upside down.

• Non-destructive testing
• Other measuring instruments

This is an ultra-precise ultrasonic thickness gauge with a minimum measurement thickness of 0.15mm and a resolution of 0.001mm. It is ideal for measuring the thickness of thin materials.

• Non-destructive testing
• Other measuring instruments

TM8812C is a compact ultrasonic thickness gauge with a measurement range of 1.0mm to 200mm.

• Non-destructive testing
• Other measuring instruments

The TH-803 is a hygrometer that can automatically record a wide range of temperature and humidity, equipped with an alarm function that sounds an alarm at maximum and minimum temperature and humidity ...

• Other measuring instruments

This is a thermometer and hygrometer that can display the current temperature digitally and switch between a 24-hour or 7-day recording chart.

• Other measuring instruments

The measurement range is a temperature recorder that can be selected from the ranges of -50 to +50℃, 0 to +50℃, 0 to +100℃, +50 to +100℃, and 0 to +250℃.

• Other measuring instruments

The TS-30K is a compact electronic scale for special purposes, integrated with a carrying case, designed for concrete, asphalt, and soil.

• Concrete curing material
• Other measuring instruments

The GM-12K is a special-purpose electronic scale for fresh concrete, asphalt, and soil, powered by dry batteries.

• Concrete curing material
• Other measuring instruments

The GMW-12K is a special-purpose electronic scale for ready-mixed concrete, asphalt, and soil. It is equipped with two types of hold functions tailored to different applications.

• Concrete curing material
• Other measuring instruments

This is a specific gravity meter that is optimal for quality control in measuring the specific gravity of rubber and plastic. It has a capacity of 220g and a minimum display of 0.01g.

• Weighing scale
• Other measuring instruments

CGX is a counting scale that allows for easy counting tasks with sample functions. It is available in capacities of 16kg, 30kg, and 60kg.

• Weighing scale
• Other measuring instruments

S-207 is a field density measuring device that conforms to the "Density Test Method for Soil by Sand Replacement" specified in JIS A 1214.

• Pipeline Construction
• Geological Survey
• Other measuring instruments

The Cone Penetrometer S-217 is the easiest to operate and portable static cone penetration testing device.

• Pile and foundation work
• Geological Survey
• Other measuring instruments