Insulation particle heat-cut powder (converted into NASA insulation paint with paint additives)
HCP
Insulation paint can be made at a super low cost! It's a simple task of mixing heat-cut powder into commercially available or industrial paints to create insulation and heat-reflective paint.
The thermal insulation particle heat-cut powder is a new material that combines vacuum insulation effects and infrared reflection effects. By mixing it with paints or adhesives, it is possible to achieve powerful insulation effects. Users can freely choose paints, adhesives, cements, and plasters tailored to their specific usage environments, allowing for the creation of high-quality insulation paints for a wide range of applications. Being made of 100% ceramic material, it has a very high melting point and does not have any negative impact on the environment. Its applications are limitless, including use in exterior wall construction of buildings and in industrial fields with high-temperature or cold areas. The labor cost is only about 500 yen per square meter added to the general painting costs, making it very low-cost for insulation work. Additionally, by using the water-based inorganic heat-resistant paint Thermis in conjunction, it is also possible to create high-temperature insulation paint that can be used in areas up to 1,000 degrees. Applications: [Construction and Building Materials] General houses, shops, public buildings, buildings, factories, warehouses, refrigerators, chemical plants, livestock barns, incineration facilities. [Vehicles and Vessels] Heat protection for cabins and engine compartments of automobiles, ships, and aircraft. [Products and Parts] Waste heat ducts for tanks, boilers, turbines, vending machines, ice storage, compressors.
Inquire About This Product
basic information
The secret of the insulation effect of the heat-cut powder lies in its vacuum hollow structure. While there are various materials to suppress heat, theoretically, there is no material more suitable for insulation than a vacuum state, where thermal conductivity is zero. Furthermore, the heat-cut powder can suppress over 90% of heat absorption by reflecting or re-radiating infrared rays from its spherical surface. The synergistic effect of the low thermal conductivity due to the vacuum hollow structure and the powerful reflective effect not found in other insulating materials gives the heat-cut powder unparalleled high insulation performance. It is a new material that can be freely applied for heat prevention and insulation purposes in various situations, from solar heat shielding in general homes to industrial fields exceeding 1000 degrees Celsius. Characteristics of heat-cut powder: 1. Durability depends on the quality of the base paint. 2. By reducing the thermal load on the paint, it significantly enhances exposure resistance. 3. Being 100% inorganic, it does not cause chemical reactions regardless of the material (metal, resin, wood, fiber, ceramic). 4. It can be used with paints suitable for the intended purpose, whether water-based or oil-based, thus broadening the range of applications and contributing to cost reduction.
Price information
The price varies depending on the quantity, so please feel free to contact us.
Price range
P2
Delivery Time
P2
※The delivery time may vary depending on the quantity, so please feel free to contact us.
Applications/Examples of results
Examples of Heat Insulation for Residential Roofs Concrete Panel Method, Two-Story Flat Roof (Paint Used: Water-Based Emulsion Roof Paint, Mixed Color: White, Mixing Ratio: Approximately 20% of Paint Weight, Outside Temperature: 36 degrees) Roof Surface Temperature: Before Construction 63 degrees → After Construction 40 degrees Indoor Temperature on the Second Floor: Before Construction 40 degrees → After Construction 31 degrees Note: The main living space on the first floor was about 2 degrees cooler than the second floor, allowing the air conditioning setting to be minimized. Record of Heat-Cut Powder Exterior Wall Painting In Osaka City, a wooden house with a mortar exterior wall, eaves, iron shutters, iron fences, and a balcony, with a total area of 145 square meters, built over 30 years ago. Note: As a result of combining exterior wall painting, electricity costs were reduced by approximately 30%, and the cooling capacity of the air conditioning improved compared to before painting, allowing the setting temperature to be increased by 1 to 2 degrees (Before Construction 25 degrees → After Construction 27 degrees). Cooling Power Enhancement Strategy Using Only Outdoor Unit + Refrigerant Tact Insulation Construction Site: Takarazuka City, Hyogo Prefecture, Saint Marc Takarazuka Store, Painted Areas: Air Conditioning Outdoor Unit Installed on the Roof + Outdoor Piping Painting Result: The refrigerant temperature circulating through the outdoor unit and piping was no longer affected by outside temperatures, allowing the store's indoor temperature to be comfortably maintained even during peak daytime hours, resulting in approximately 20% energy savings.
Line up（5）
| Model number | overview |
|---|---|
| HCP300ml | Heat Cut Powder 300ml (Weight 110g) Equivalent to 1L of NASA insulation paint when mixed with 700ml of paint Coverage area 2.5 square meters (1.0 square meters for condensation prevention) Suggested retail price: 3,600 yen (excluding tax) |
| HCP900ml | Heat Cut Powder 900ml (Weight 330g) Equivalent to 3L of NASA insulation paint when mixed with 2.1L of paint Coverage area 7.5 square meters (3.0 square meters for condensation prevention) Suggested retail price: 8,000 yen (excluding tax) |
| HCP3L | Heat Cut Powder 3L (Weight 1.1Kg) Equivalent to 10L of NASA insulation paint when mixed with 7L of paint Coverage area 25 square meters (10 square meters for condensation prevention) Suggested retail price: 18,000 yen (excluding tax) |
| HCP6L | Heat Cut Powder 6L (Weight 2.2Kg) Equivalent to 20L of NASA insulation paint when mixed with 14L of paint Coverage area 50 square meters (20 square meters for condensation prevention) Suggested retail price: 30,000 yen (excluding tax) |
| HCP24L | Heat Cut Powder 24L (Weight 8.8Kg) Equivalent to 80L of NASA insulation paint when mixed with 56L of paint Coverage area 200 square meters (80 square meters for condensation prevention) Suggested retail price: 108,000 yen (excluding tax) |
Company information
Our manufacturing focuses on creating solutions that anyone, regardless of their expertise, can immediately experience the performance effects through their own sensibilities. All of our product lineup is derived from energy-saving measures in the automotive industry, and the materials designed for vehicles that can withstand harsh natural and road environments are also suitable for buildings and homes, which we introduce as innovative construction materials. While technological development is progressing in sustainable clean energy sources such as solar, wind, geothermal, and wave power to combat global warming, we have completed the development of a dynamic flow power chip for air conditioning units that can maintain a comfortable environment for people even while reducing electricity consumption. The dynamic flow, aimed at energy saving, also has the secondary effect of immediate deodorization, allowing for perfect odor removal of musty smells from air conditioners, tobacco odors stuck to filters, and the smells of human and pet waste without the need for maintenance. It is especially recommended for medical and caregiving settings.
![[Heat Stroke Prevention] 'Heat Stroke Prevention Water Powder' Grapefruit Flavor](https://image.www.ipros.com/public/product/image/0bc/2000374022/IPROS6456231630337059953.jpg?w=280&h=280)
![Radiative cooling + heat-insulating paint "Radicool" [Heat stroke prevention for summer warehouses and factories]](https://image.www.ipros.com/public/product/image/682/2001239213/IPROS12092899810390865129.JPG?w=280&h=280)
