ALL CLEAR

Added to bookmarks
Bookmarks list

Bookmark has been removed
Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration

Purge agent for plastic molding machines

last updated：Jul 06, 2018

ジェスコ

Official site

Forms a film on the metal surface, allowing for high cleaning. Cleaning of the nozzle tip and check valve, etc., is possible.

Forms a film on metal surfaces, allowing for high cleaning efficiency. Capable of cleaning nozzle tips, check valves, and more. Dissolves at 130°C inside the machine, becoming a liquid that cannot remain in the machine itself. Acts as a purge agent by blending 5% with inexpensive resin for masterbatch. Does not depend on molding temperature or molding resin. If used with PVC, please replace it with other resins. It has self-discharging properties, and the purge resin itself cannot remain at all. It is almost odorless. It can be recycled with recycled materials, and blending 5% with recycled materials is sufficient. It allows for cleaning without using any inorganic substances and does not rely on resin viscosity. It can clean complex shapes of molds and also cleans solid particles from generated gases.

Related Link - http://www.jesco.biz/

Inquire About This Product

basic information

＝＝＝＝　ALLESKLAR (Aresukura) ＝＝＝＝ It removes contaminants from metal surfaces through 100% chemical action (surface chemistry) and can be expelled with a weak resin pressure. "It is possible to remove carbides adhered to metal surfaces." "It is a versatile type that does not depend on molding temperature or molding resin." "It offers significant advantages in terms of environmental impact and cost." "It is a revolutionary purge agent with zero residue." "It can shorten the cleaning time for decomposition." ★If you would like a sample★, please click the "Download" button and fill out the fax form.

Price information

Please feel free to contact us.

Delivery Time

Please contact us for details

※Please feel free to contact us.

Applications/Examples of results

Currently, remove the production resin that is being formed from the cylinder through purging. Blend 5% Aresclad into the production resin that is currently being formed and put it into the hopper. The molding conditions can remain the same. Rotate the screw at a low speed (30-50 rpm) and manually perform the purging. Purging should be done at low speed, and when the resin coming out of the nozzle has changed to Aresclad blended resin, stop the purging. Weigh up to the maximum measurement value, and once the cylinder is filled with Aresclad blended resin, turn off the heater power of the molding machine. Remove the Aresclad blended resin from the hopper. Leave it in this state for more than 8 hours (it is fine to leave it for several days). On the production start date, turn on the power of the molding machine and put the production resin into the hopper. When the cylinder temperature reaches the set temperature, perform normal purging to discharge the cleaning resin. Once the resin in the cylinder has been replaced with production resin, start production.