Epoxy Resin HS
This resin excels in initial curing properties and has good adhesion. It can be widely used, from carbon molded products that require strength to the repair of dry carbon products. By applying heat during curing, its heat resistance can be increased up to 160°C. It is not a resin that emphasizes transparency.
Inquire About This Product
basic information
Mixing ratio: Base 100 : Hardener 26 (weight ratio) *The mixing ratio is quite critical, so please measure accurately by weight. *Due to its viscosity, please stir thoroughly until fully mixed. Working time: 30 minutes Normal curing method (heat resistance 80℃): Cure at room temperature (25℃) for 24 hours Heat-resistant curing method (heat resistance 160℃): After mixing the resin and completing the exothermic reaction, cure at 80℃ for 12 hours, then at 120℃ for 2 hours, or cure at room temperature (25℃) for 1 week, then at 120℃ for 2 hours.
Price range
P2
Delivery Time
P1
Applications/Examples of results
Repair of dry carbon Repair of jet skis CFRP molding by hand layup CFRP molding by resin infusion
Line up（2）
| Model number | overview |
|---|---|
| 1.26kg set | |
| 5.04kg set |
Company information
Sunlight Co., Ltd. has a wide range of materials necessary for FRP molding. Please feel free to contact us, especially for materials related to FRP parts for automotive and motorcycle exteriors.
![Introduction to 2-component resin [Gem Resin] ✨](https://image.www.ipros.com/public/product/image/2106621/IPROS9230766954671054535.png?w=280&h=280)
