For bathroom use, we recommend environmentally friendly paint with F☆☆☆☆ Four-Star certification!
The Furocoat series of paints is specialized in anti-mold and is a safe and reliable paint that complies with building standards!
It is a paint designed for use in bathrooms and bathtubs, prioritizing safety above all else!
The government has established standards and regulations for building materials that emit formaldehyde, which can cause sick house syndrome. These standards also apply to paints, with "F☆☆☆☆" (Four-Star) indicating the highest level of compliance. The "Frocoat Series Paint" meets these standards. Please use "F☆☆☆☆" (Four-Star) certified paint to address sick house syndrome. Additionally, this paint is certified by SIAA for "mold prevention," meaning the paint film has mold-resistant properties. Even if you invest in new painting, if it leads to sick house syndrome, you will need to repaint or renovate, which can be costly. When considering painting, it is advisable to view "sick house syndrome" and "F Four-Star" together and recommend the "Frocoat Series Paint." - There are three types of paint: Bio Coat LXECO: SIAA, Four-Star certified type Bio Coat ECO: Mold prevention function not at SIAA level, Four-Star certified type Frocoat ECO: Budget version of mold prevention, Four-Star certified type
Inquire About This Product
basic information
- There are three types of paint: Bio Coat LXECO: SIAA, Four-Star certified type Bio Coat ECO: Anti-mold function not at SIAA level, Four-Star certified type Flow Coat ECO: Budget version of anti-mold, Four-Star certified type - Since it does not contain toluene or xylene, there is less unpleasant thinner smell during work. - The surface hardness is at H level, allowing it to follow the expansion and contraction of materials like FRP bathtubs, and it is highly durable against impacts (such as dropping a showerhead) compared to other companies. "Surface Preparation Before Painting" - Completely remove old paint, rust, moisture, and oil from the material. Also, if performing solvent degreasing, please use Pre-Solvent and Silicone Off. - Sanding should be done with a final grit of #600 or higher. - After the primer and intermediate coat, please promptly apply the topcoat. "Two-Component Acrylic Urethane Base Coat Paint" This product is designed to perform at its best under various conditions, but actual performance may vary depending on painting conditions, drying conditions, and the materials used, so please confirm in advance before use.
Price information
It varies depending on the amount handled, so please feel free to contact us.
Delivery Time
※It varies depending on the amount handled, so please feel free to contact us.
Applications/Examples of results
[Recommended Uses] ■ Painting in bathrooms of hotels, inns, spas, wellness facilities, and private homes ■ Washbasins, toilets, etc. ■ Suitable for wall painting in water-related areas such as kitchens.
Detailed information
-
We take the time and effort to thoroughly prepare the surface (sanding) before painting, so the paint won't peel off.
catalog（4）
Download All Catalogs
Company information
Our company is pursuing the possibilities of painting by introducing various facilities. The trivalent chemical treatment coating cleaning device significantly enhances the "rust prevention and durability improvement" for iron and die-cast products. After this treatment, we perform painting work in a class 100,000 clean room (where temperature and humidity are controlled to prevent static electricity and dust, resulting in a very clean surface finish of the paint film), creating a paint film with excellent aesthetics. "Insulating paint" to prevent low-temperature contact burns from computers. "X-ray shielding paint" for glasses to prevent secondary exposure for medical professionals. "Choking prevention paint" to prevent accidental ingestion of chip products. "Antibacterial, antiviral, and mold-resistant paint" for various products such as handrails, handles, and buttons. [General Metals] Iron, copper, aluminum, stainless steel, titanium, brass, magnesium, zinc die-cast, aluminum die-cast, rubber cast, etc. [General Plastics] ABS, PC, PP, acrylic, nylon, polyacetal, ferrite, etc. We provide painting solutions aimed at improving the functionality, design, and added value of the final surface of your products.
