A hoist with brakes that simplifies overhead lines. Enables aerial transport with a single power source. Allows for extensive lateral movement, making transportation on slopes and in valleys easy and economical.
Achieving 100kg aerial transport with a single power unit using a simple aerial line Ideal for the small transport of hazardous trees and materials in slopes and valleys ● Lightweight configuration, no heavy machinery or vehicles required Transport can be carried out along a designated route in areas with risks of falling or contact with protected objects. ● Can be set up in about an hour if there are standing trees For small transport, it is more economical compared to cable cranes or monorails. The aerial line consists of only two cables: a fixed cable (serving as a rail) and a moving cable. The aerial transport device is moved manually. ● You can watch videos of usage scenarios and installation methods on the YouTube Forest Machinery channel > link to the playlist https://www.youtube.com/playlist?list=PLVZFwVUhKZYnLgFF9_d3P0U0_vPzHTkgZ ● Features - Compatible with both aerial and ground transport - Automatically stops falling loads for safety below - Supports temperatures from -40 degrees to +40 degrees; the transport route remains the same regardless of slope - The aerial transport device can stop at any position; no need to secure it when loading or unloading - Standard support for 1 to 3 times the force - Compatible with both fiber ropes and wire ropes through brake replacement - Made of duralumin, the main body weighs 8.5 kg, making it easy to carry.
Inquire About This Product
basic information
●Load Capacity ・1000N (100kgf) for aerial transport, 2000N (200kgf) for ground pulling transport ●Size ・570×380×130 mm ・Weight: 10.5 kg ●Product Registration Approval ・NETIS Registration Number CB-220024-A "Cableway Transporter with Brake" ●Overview of Operating Principle ・Equipped with a mechanical brake that grips the fixed cable, the brake automatically switches ON/OFF based on the height of the load, allowing for lifting and moving the load with a single power source. The direction of movement is only one-way (toward the side with power). ・It is possible to stop the transporter and take the load sideways. ・The angle of inclination (angle of the fixed cable) can accommodate from -40° (lowering load) to +40° (raising load). ・The operating principle is patented. ●Brake (replaceable, one included with the main unit) ・If the fixed cable is a fiber rope, there are four types depending on the diameter. For wire rope, there is one type. Please check the catalog for details. ●Compatible Ropes (to be provided by the customer) ・Fixed cable: Fiber rope diameter Φ9 to 16 mm / Wire rope diameter Φ6 to 12 mm ・Moving cable: Fiber rope only, diameter of 10 mm or less ●Compatible Power Source (to be provided by the customer) ・Engine winch capable of winding fiber rope with a diameter of 10 mm or less.
Price range
P4
Delivery Time
P3
※Delivery dates may vary depending on the timing, so please feel free to contact us.
Applications/Examples of results
[Uses] ▶ Removal of hazardous trees and windfall trees ▶ Removal of discarded thinning timber ▶ Stream maintenance (removal of collapsed materials) ▶ Transportation of materials across slopes and streams ▶ Transportation of mushroom logs ▶ Transportation of firewood and wood biomass ▶ Transportation of seedlings ▶ Transportation of bamboo ▶ Transportation of forest products such as fruits [Track Record] Numerous forestry civil engineering contractors Numerous landscaping contractors Numerous specialized logging contractors Numerous forestry industry professionals / fruit farmers Numerous NPOs and local governments related to satoyama maintenance
Detailed information
-
Examples of usage scenarios and applications ~ real cases ~
-
Examples of usage scenarios and applications ~ Image ~
-
Simple overhead wire configuration
-
Setup Procedure Step 1
-
Setup Procedure Step 2
-
Setup Procedure Step 3
-
Setup Procedure Step 4
-
Setup Procedure Step 5
-
【Advantages】It accommodates all transportation conditions on slopes. The HANAKO transport device utilizes this braking mechanism to handle transportation with loads lifted off the ground (i.e., aerial transportation). This is possible due to its ability to maintain the pulling speed of the moving cable, regardless of how the load is lifted (i.e., the height above ground). *Note: A light aerial cableway is a system operated by a single power source. The HANAKO A2 transport device complies with light aerial cableway standards. ● Compatible with both aerial transportation and end-lifting ground pull transportation By maintaining ground height, aerial transportation can be linked to truck loading. ● Safe handling of dangerous descending loads Safety is ensured below by automatically stopping falling loads. ● Supports descending, ascending, and horizontal transportation The travel path remains the same regardless of the slope, and the operating procedures are also the same. ● Aerial transport device can stop It can stop at any desired position, eliminating the need for securing during loading and unloading. ● Lightweight / No tools required Made from duralumin for high rigidity, the main body is lightweight at 8.5 kilograms. ● Standard support for 1 to 3 times the force The doubling of force reduces swaying during aerial transportation and accommodates small power sources to manual operation. ● Compatible with both fiber ropes and wire ropes Brake replacement allows compatibility with any fixed cable rope.
Line up（8）
| Model number | overview |
|---|---|
| HNA2 | Overhead wire handling device HANAKO A2 set (includes 1 main unit + 1 brake + dedicated clip) |
| FB10 | Brake for fiber rope size 10 Compatible with diameter Φ9 to 10.0 mm |
| FB12 | Brake for fiber rope size 12 Compatible with diameter Φ10 to 12.0 mm |
| FB14 | Brake for fiber rope size 14 Compatible with diameter Φ12 to 14.0 mm |
| FB16 | Brake for fiber rope size 16 Compatible with diameter Φ14 to 16.0 mm |
| AWBC | Brake for wire rope Compatible with Φ6 to 12 mm |
| AWB100 | [Consumable] Brake shoe for wire rope. Each shoe can be used on both upper and lower surfaces. |
| BC2 | Dedicated clip. Included with the overhead wire handling device HANAKO A2. It is also sold separately under the name "BoostClip200". |
catalog（7）
Download All Catalogs
Company information
▶ Utilizing human resources, manufacturing and selling tools for mountain work While supported by the power of machines, we strive to create tools that allow people to use their hands, feet, and senses to demonstrate their ingenuity. ▶ Proposing transportation using simple cableways Cableways are optimal for transportation in mountainous areas without roads or where trees obstruct paths. Our company offers solutions through a simple cableway system. We aim to avoid creating roads that could lead to landslides, extend transportation reach with cableways, and ensure that human effort is applied throughout the mountains to protect them. ▶ Proposing chainsaw woodworking to utilize unused materials To make use of timber (unused materials) that lies dormant in the mountains and does not reach the market, on-site processing methods are necessary. Our company develops and manufactures jig products such as log vices to assist with log processing and woodworking using chainsaws. ▶ Information provision and support We aim for a society where access to mountains and their resources is commonplace, providing know-how and information related to mountain work. We share guides for those starting with cableways, examples of processing unused materials, and more through YouTube, blogs, and guidebooklets. Additionally, we offer on-site support to demonstrate how to use our products according to individual needs.