Microwave Safety Monitoring Sensor 'BFS01/BFS01-P'

This time, we would like to introduce the "Snow Accumulation Prevention Cover (PSP-SCV)" and the "Snow Accumulation Prevention Reflector (PRF-300SP)." If snow accumulates on the surface of the microwave sensor, it may not be able to detect properly depending on the amount of snow. To prepare for such situations, we have the "Snow Accumulation Prevention Cover (PSP-SCV)." *Applicable sensors: BSS01, BSS20, BLS01, BFS01 By attaching this to the sensor, you can prevent snow accumulation on the sensor body. Additionally, when installing the microwave intrusion monitoring sensor (BSS01) facing the reflector, we also have the "Snow Accumulation Prevention Reflector (PRF-300SP)" designed to prevent snow accumulation on the reflector. By using these products together, normal detection can be achieved even in heavy snowfall areas.

BFS01 can measure distance and speed with a single sensor. It simultaneously measures the distance and speed of reflective objects, such as vehicles, that enter the monitored area and outputs an alarm (only if the judgment conditions are met). This feature allows it to be used for safety monitoring, such as preventing vehicle collisions. It is possible to set two-stage detection areas at any distance, so in application examples, it is configured as an alarm area and a caution area. Additionally, microwaves are resilient to weather conditions such as fog, snowfall, and rainfall, resulting in minimal measurement errors even in harsh outdoor environments.

At Pal Giken, we are developing various sensors that use "microwaves," and this time we will explain how they detect intrusions. ◆◆ Two Detection Methods ◆◆ Our microwave sensors support two detection methods. 1) Beam Reflection Detection Method A single sensor is installed, and the transmitted wave output from it defines the detection area. The detection range depends on the antenna angle of the sensor, but the sensor alone covers a wide distance. When a target intercepts the transmitted wave from the sensor, it is received as a reflected wave and detected as an "intrusion." 2) Beam Interruption Method This method configures the detection area by positioning the sensor and reflector opposite each other. The transmitted wave output from the sensor hits the reflector and is received as a reflected wave. Additionally, there are products that configure the detection area using a transmitter and receiver. In this case, the transmitted wave output from the transmitter is received by the receiver. In both cases, the levels that serve as the basis for transmission and reception are monitored, and if the radio wave is interrupted by an intrusion, causing the level to drop below a threshold, it is detected as an "intrusion."

Microwaves are a type of radio wave and a form of electromagnetic wave. Electromagnetic waves propagate as repeating waves, and the number of repetitions per second is called frequency (measured in hertz, Hz). The length from the peak of one wave to the peak of the next is called wavelength. Electromagnetic waves are named according to their frequency, and their applications vary according to their characteristics. In our company, we refer to radio waves with frequencies ranging from 3 GHz to 30 GHz (wavelengths from 10 cm to 1 cm) as "microwaves," and we use 24 GHz band radio waves in our microwave sensors. ◆◆ Features of Microwaves ◆◆ The features of microwaves include: - High directivity - Resistance to weather changes such as rain, fog, and snowfall - Ability to penetrate materials like resin, making them unaffected by obstacles These features, combined with our unique algorithms (signal processing technology), enable long-distance detection even in harsh environments. Additionally, our sensors can be used without a license. They can be installed in various situations, both indoors and outdoors, within the country.