One-touch finishing and repair material for external flooring 'LI Coat (G)'

To apply mortar on the old asphalt surface of the warehouse loading area, a primer was applied first, followed by the installation of resin mortar. Since the application is thin enough for the asphalt surface to show through, there are some areas where the mortar has worn down, but considering the daily use by large vehicles and forklifts, there has been no lifting or peeling, indicating that the effectiveness and durability of the primer are sufficient. A point to note regarding the asphalt surface is the need to check how much oil residue remains during paving to ensure that it does not repel the primer during application.

Problems with thin mortar repair in parking lots include issues such as delamination, peeling, and wear due to aging. The 'LI Coat (G)' repair, which is approximately 3 mm thick, shows no signs of delamination or peeling even after 10 years, although dirt and fine cracks may be observed. (There may be variations depending on the thickness of the application, climatic conditions, and the vehicles in use.)

To finish the tenant building floor without raising it, a thickness of 5 mm was used. Due to the lack of time before the opening, the interior work was carried out concurrently. Two days after construction, moisture had not yet evaporated, resulting in visible color unevenness, but it became less noticeable by the time of the opening. This site opened with the finish exposed as is, but in the case of a painted finish, a sufficient curing period is necessary until the moisture in the material evaporates.

Easy application even in hard-to-reach areas with a trowel!! Thanks to its fluidity, it can be easily leveled even in hard-to-reach areas under fences!! (Photo) ■Product PR 'Nichimo L.I. Coat (G)' is developed as a leveling material specifically for floors and can be used as a finishing and repair material for both interior and exterior applications. It boasts excellent fluidity, strong adhesion to the substrate, and creates a floor surface with high curing strength. ■Features 1. Smooth finishing is possible just by pouring it in narrow or inaccessible areas where a trowel cannot reach. 2. Due to its strong adhesion to the substrate and high curing strength, it is ideal for repairs in areas exposed to rain, such as parking lots, bicycle parking areas, and roof balconies. Moreover, it can also be finished with a raw surface. ■Packaging 20 kg/bag