Tapflex high-pressure injection water stop system
TAP Grout Method Acrylic High-Pressure Injection Waterproofing Tap Flex System
Protect important buildings from water leakage. Acrylic-based high-pressure injection waterproofing system. Quick hardening response for sites troubled by recurring leaks, no matter how many times they are sealed!
2-component acrylic injection system CERINOL TAP-FLEX method Tapflex The TAP-FLEX method is a waterproofing injection technique for leak points in concrete structures that excels in long-term durability. The Ex-Flex injection liquid used in the TAP-FLEX method is a 2-component methacrylate waterproofing material developed with a focus on safety and durability. The TAP-FLEX method contributes to the longevity of concrete structures and the maintenance of asset value by preventing water ingress into the structure, thereby preventing the deterioration of concrete and reinforcing bars. In underground spaces, structures are constantly in contact with water. Additionally, the water that seeps in is subjected to constant water pressure, creating an environment different from that above ground. The TAP-FLEX method has the following features to efficiently and reliably waterproof against infiltrating water in underground spaces, allowing for long-term effective use of these areas: 1. Can be installed in thick-walled areas in a short time and ensures reliable waterproofing. 2. Waterproofing is possible under pressure conditions. 3. The construction method leaves minimal visible traces of waterproofing. 4. Excellent long-term durability in areas where movement is anticipated. 5. Complies with drinking water standards, passing the leaching test under Ministry of Health Ordinance No. 15.
Inquire About This Product
basic information
System Features - Only small diameter holes of approximately 10.5 to 13 mm are drilled into the leak area using a hammer drill or similar tool, so there is no significant damage to the structure. - By continuously injecting the Ex-Flex injection liquid at high pressure against the pressurized water, the leakage is pushed out, and the entire infiltration path is replaced and filled with the injection liquid. - A dedicated injection tool designed for high-pressure injection, considering construction safety, is used. The TAP Grout 2K Inject Unit is a specialized injection system that mixes, discharges, and cures the Ex-Flex injection liquid, which consists of two components, at the tip of the injection gun. - It is air-driven and can inject a two-component mixed injection liquid at medium to high pressure. - The two components are mixed at the tip of the injection gun, allowing for the adjustment of curing time during injection. - It can inject a large volume of Ex-Flex injection liquid at medium to high pressures of up to 20 MPa, even for leaks with high water volume or in underground areas under pressure, resulting in a high water-stopping effect. - Equipped with a dedicated cleaning pump, it allows for cleaning the material pathway during construction, reducing system troubles. - Designed specifically for high-pressure injection, it enables safe operation. - The injection tool is made of stainless steel to minimize the effects of rust.
Price information
The cost for water leakage is 61,200 yen per meter (excluding tax). Prices may vary depending on the quantity and the conditions of the leakage at the site.
Price range
P2
Delivery Time
P3
Applications/Examples of results
Applications - Expansion joint water stop - Tunnel water stop - Sabo dam water stop - Retaining wall water stop - Crack water stop - Underground structure water stop - Water supply and drainage facility water stop - Waterway water stop, etc.
Detailed information
-
Expansion joint water stop condition
-
Tapflex Injection Machine Compression Ratio: 25:1 Mixing Ratio: 1:1 Maximum Discharge Volume: 14 L/min Discharge Volume (Cycle): Approximately 0.08 L Maximum Discharge Pressure: Approximately 20 MPa Maximum Supply Air Pressure: Approximately 0.8 MPa Required Air Volume: 200–400 L/min
-
Durability, elasticity, and rubber elasticity gel substances - Under dry conditions, the dried shrinkage gel absorbs moisture from the surroundings and re-swelcomes. It stops re-leakage at leak points. - The liquid phase in the hydrated gel does not freeze even at 0°C. - Gel time varies depending on stirring, liquid temperature, and the amount of accelerator used. - It has low viscosity and penetrates hairline cracks, demonstrating a leak-stopping effect. - The components of the main agent liquid and curing agent liquid have high safety, and neither component is urethane-based. - It is a two-component equal mixing type of main agent liquid and curing agent liquid. - It is a coexistence system of non-volatile substances and water, and even at low negative temperatures, the aqueous phase does not undergo freezing and thawing phenomena, and it will not be destroyed by repeated drying shrinkage unless the molecular structure (chains) of the three-dimensional structural resin is broken. Packaging and Form Exflex Main Agent: 17L/can, square can Exflex Additive: 20g bag * 5 bags, aluminum bag, 5 bags/box Exflex Curing Agent: 100g bag * 10 bags, aluminum bag, 10 bags/box
catalog（2）
Download All Catalogs
Company information
Supported by a solid foundation of trade cultivated over many years, we engage in the import and export of a wide range of products, including automobiles, machinery, and electrical and electronic equipment, as well as trilateral trade and domestic sales. ○Planning and Organization We facilitate technology transfer and partnerships, and engage in joint ventures and their planning with domestic and international companies, as well as commercialization. ○Financing We provide funding and various forms of support during import and export activities and joint ventures. ○Consulting and Marketing We offer consulting and marketing services related to all aspects of these businesses.
