The cross-cut test master is a manual device developed for quickly and accurately performing cross-cut tests on a tabletop.
The attachment part is designed to set a rotary spare cutter, allowing for even cuts in one go. Various spare cutters can be set, including 6 blades with 1mm, 2mm, and 3mm intervals (25 square test) and 11 blades with 1mm intervals (100 square test), enabling all tests at 1mm, 2mm, and 3mm intervals by changing the cutter. This cross-cut tester is developed with the aim of conducting quick, uniform, and fail-proof tests. The maximum size of the test piece that can be set is 200×200mm. The spare cutter has 6 blades (edges). By rotating the blade each time it wears out, you can cut with a new edge, reducing running costs. The cross-cut tester main body can be fixed to a desk or similar surface using screws for use.
Inquire About This Product
basic information
Select a spare cutter for making cuts and attach it to the attachment part. Place the test piece on the table of the main unit. Hold the front handle with the hand opposite your dominant hand, and slowly lower the multiple blades attached to the attachment onto the starting point of the cut on the test piece. With your dominant hand, hold the rear handle and pull it towards you to cut the coating. Change the orientation of the test piece and make cuts both vertically and horizontally to create a grid-like cross-cut in the center. Apply adhesive tape over it and quickly peel it off. Classify the test area by comparing the state of the coating that has been peeled off by the tape with the examples of test results classified from 0 to 5 according to JIS standards (JIS-K5600).
Price information
330,000
Price range
P3
Delivery Time
P4
Applications/Examples of results
Related standards: JIS-K5600-5-6 Adhesion Cross-Cut Method, ISO 2409, ASTM D3359
catalog（2）
Download All Catalogs
Company information
We sell coating quality control equipment. We have a wide range of products related to coating and painting quality, including adhesion tests (cross-cut method and pull-off method), film thickness measurement, coating hardness (pencil hardness tester), bendability tester (cylindrical mandrel bending tester), drying oven temperature data loggers (oven loggers), particle gauges, applicators, blast comparison plates, and more. Please feel free to contact us.
