Aluminum heat-insulating sheet, non-combustible aluminum heat-insulating sheet, aluminum non-combustible heat-insulating sheet.
Is comfort related to temperature? Even if you increase the thickness of insulation and lower the thermal conductivity, it won't necessarily lead to comfort. It is used in the roof, walls, and floors of buildings, demonstrating high heat insulation effectiveness!
● This is a non-combustible material with a glass fiber core and aluminum foil attached to both sides. ● A tape of the same material (such as SS tape) is used at the seams to maintain adhesion. Heat insulation measures for buildings during the summer are key. ● In summer, roofs heat up due to solar electromagnetic waves, reaching temperatures of around 55°C to 70°C. By covering them with SS sheets, radiant heat is reflected, protecting the building from radiant heat that insulation materials cannot guard against, creating a comfortable space that is less affected by outside temperatures. ● By covering with this product, radiant heat is reflected, protecting the building from radiant heat that insulation materials cannot guard against, creating a comfortable space that is less affected by outside temperatures. ● The glass fiber reinforced core with aluminum sheets on both sides demonstrates durability, making it less prone to cracking from bending and improving workability on site. It also has waterproof performance and achieves moisture-proofing, heat insulation, and airtightness with a single layer of sheet even in fire compartments. ● According to alkali exposure tests conducted at our research institute, when applying this product directly to hardened concrete, no alkali corrosion is observed if primers, adhesives, etc., are used.
Inquire About This Product
basic information
- When directly applying SS sheets to hardened concrete, using primers and adhesives will prevent alkaline corrosion. - As a CO2 reduction measure, it can be used during renovations or new constructions in factories, stores, and office interiors, leading to reduced heating and cooling costs and improved environmental conditions. - It can be used on roofs, walls, and floors of buildings, providing a comfortable space and energy-saving effects. - Floor: It reflects 97% of the heat radiated from the floor, making the area underfoot and the entire floor comfortable. - Walls: It reflects 97% of the heat radiated from the outside, demonstrating high soundproofing and heat insulation effects, eliminating the need for waterproof sheets, and preventing the growth of bacteria and mold. - Ceiling: Used as an inner lining, it provides high soundproofing and heat insulation effects. - Due to its excellent durability, it can also be easily used for refrigeration, insulation, storage, and duct and pipe insulation.
Price range
Delivery Time
Applications/Examples of results
● Wooden structures (new and existing) roofs, attics, walls, floors ● Existing folded plate roofs ● Heat insulation measures for outdoor air conditioning units ● Shielding for cables, connectors, etc.
Detailed information
-
Thermal insulation performance test method A thermocouple was placed 25 cm away from an infrared heater on a gypsum board, and the temperature changes were measured in two scenarios: without covering the sensor with a sheet, and covering it with an SS sheet or commercially available aluminum foil. Measurement duration: every 10 seconds for 2 hours Room temperature: 18–20℃
-
Performance Sheet SS Sheet The SS sheet is a double-sided aluminum sheet that has obtained non-combustibility certification, making it an excellent building material in terms of durability and workability.
-
Performance Table: Aluminum Foil (Comparison) It is practically impossible to install aluminum foil in buildings.
-
Regarding fireproof certification: Fireproof material certification (non-combustible: NM-1776) is required for construction under interior restrictions. 1) Fireproof materials are those defined by the Minister of Land, Infrastructure, Transport and Tourism according to performance classifications of non-combustible, quasi-non-combustible, and flame-retardant materials. ● When subjected to heat from a typical fire, the following points must be met: ◎ It must not burn. ◎ It must not undergo harmful deformation, melting, cracking, or other damage that is detrimental to fire safety. ◎ It must not produce harmful smoke or gas that could impede evacuation. ● Each performance is determined based on the time after heating begins. ◎ Non-combustible performance: 20 minutes after heating begins. ◎ Quasi-non-combustible performance: 10 minutes after heating begins. ◎ Flame-retardant performance: 5 minutes after heating begins. 2) Fireproof performance is certified based on the combination of the substrate material (as per the Ministry of Construction Notification No. 1400, non-combustible materials are defined by the amendments to Ministry of Construction Notification No. 1400 and Ministry of Land, Infrastructure, Transport and Tourism Notification No. 1178, as determined by the Minister of Land, Infrastructure, Transport and Tourism) and the construction method.
-
Alkali resistance test: standard SS sheet
-
Alkali Resistance Test: Contact with concrete slab for about 1 year SS sheets were adhered to the cured concrete using a primer and interior adhesive, and after leaving them for about six months, they were removed to check for signs of corrosion. As a result, there were no signs of corrosion after about six months. Therefore, when directly adhering SS sheets to concrete, it is sufficient to insert a primer that does not corrode in alkali and can maintain a pH that is nearly neutral. Primer: Special urethane-modified acrylic emulsion penetrating sealer Adhesive: Interior chloroprene rubber adhesive (solvent-based) Adhesive: Acrylic emulsion adhesive for carpet tiles (water-based)
catalog（3）
Download All Catalogs
Company information
Our mission is to add our unique ideas and know-how to the new materials that are continuously emerging, in order to meet the needs of various industries, and to propose them as new products with added functionalities. Our functional composite materials demonstrate excellent and original capabilities across various fields, including home appliances, precision instruments, medical equipment, construction, and transportation, as well as in areas such as equipment parts, special rooms, and architectural panels, thereby contributing to society. Our pride lies in our development capabilities that continue to lead the industry, reflecting the times and exploring the next generation. We offer a wide range of products for electromagnetic wave countermeasures. Furthermore, we have established a system that allows us to consistently provide everything necessary for effective and efficient implementation, from on-site electromagnetic wave environment measurement and surveys to construction advice and shielding work. Technology is not born overnight. Our employees value a proactive attitude, especially when it comes to "technologies that no one else is doing," "technologies that are deemed impossible," and "unique technologies." Not everything in development is successful; in fact, failures are more common. However, it is also true that the byproduct technologies born from these challenges support our company today.
![[Warehouse Demonstration Data] The Power of Aluminum Heat Shield Sheets](https://image.www.ipros.com/public/product/image/7ee/2000541503/IPROS50832780304217508540.jpeg?w=280&h=280)
