Quick-setting additive for floor mortar - Screedex

Added to bookmarks
Bookmarks list

Bookmark has been removed
Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration

Screedex

last updated：May 11, 2020

東亜貿易

Special site

It can be walked on 24 to 36 hours after the work is done and can be opened to traffic in the shortest time.

Even with a water reduction of over 15%, it has a buttery consistency and significantly increases strength density. It can be walked on within 24 to 36 hours. The next flooring finish can be applied in a curing period of one-half to one-third. The standard mix is 1:3 to 4, making it easy to work with and minimizing concerns about crazing or cracking, resulting in high economic efficiency due to shortened construction schedules. 【Main Features】 ■ Can be walked on within 24 to 36 hours, allowing for rapid traffic opening and use as a material storage area. ■ Accelerates the drying of the mortar, reducing the time to reach the specified moisture content to typically one-half to one-third. ■ Even with a 15-17% water reduction, it maintains a buttery consistency and can be applied with a cement ratio of 1:3 to 4, allowing for a significant reduction in cement usage.

Inquire About This Product

basic information

【Others, Features】 - The bending strength and compressive strength increase, the surface becomes hard and wear-resistant, and the density also increases, enhancing waterproofing. - Even at the maximum mixing ratio, the calcium chloride content is 0.66% of the cement weight, which is far below the safety limit of 1.5% for rebar and lath.