For corrosion of machinery and buildup on worn areas. Can also be used as an adhesive. [Applications] Piping, pumps, shafts, valves, flanges, tanks, etc.
[Overview] This is a metal repair material primarily composed of epoxy resin, which strongly adheres to a wide variety of metals and resins. After curing, it can be machined and is suitable for areas requiring precision, such as shafts. Due to its excellent insulation properties, it is also used as a corrosion prevention measure for flange mating surfaces. It is easy to use, as you only need to mix the main agent and the hardener. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ [Demo/Sample Distribution] If you would like a demo or a sample, please fill out the application with your intended use and conditions in the "Contact Us" section below. *Please note that we may decline requests based on certain conditions. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Inquire About This Product
basic information
[Instructions] □ Surface Preparation: Remove rust from corroded metal parts using blasting, grinders, etc., and roughen the surface. □ Degreasing Cleaning: Remove moisture, oil, and dirt using a cleaning agent. □ Mixing: Take the main agent and hardener in the specified mixing ratio on a board made of plastic or similar material and mix thoroughly to avoid color variations. □ Application: Initially apply to the prepared surface by rubbing it in, then apply until the required thickness is achieved. [Product Information] □ Properties: Paste-like "after mixing" □ Color: Gray □ Packaging: 1 kg "main agent, hardener set", 2 kg "main agent, hardener set" □ Mixing Ratio (by weight): Main agent 5 : Hardener 1 □ Curing Time: 20 hours at 25°C [Product Physical Properties] □ Adhesive Strength (Iron): 19.2 MPa □ Heat Resistance: 200°C (dry) □ Shelf Life (unopened): 5 years
Price information
Please contact us.
Price range
P2
Delivery Time
P2
Applications/Examples of results
- Piping - Various flanges - Pump casing - Pump parts - Pump impeller - Shaft - Tank - Tank nozzle - Thread - Bearing housing - Engine block
Detailed information
-
Pipe repair: Since no flame is required, it can be safely used in areas with less thickness.
-
Shaft repair: For small ones, machining can be done using a lathe, and for large ones, repair is possible using a molding method combined with release agent 9411.
-
Flange installation: The flange surface can also be easily repaired using a jig.
-
When bonding the plate: It can be used as a high-strength adhesive during the bonding of the piping reinforcement plate.
-
Pump parts repair: Repairs that require precision, such as the gland part, can be accommodated as machining is possible.
catalog（3）
Download All Catalogs
![[Metal Repair/Build-Up Putty] Belzona 1111 Super Metal/User Manual](https://image.www.ipros.com/public/catalog/image/01/fe3/424402/IPROS18176825795919922681.jpeg?w=120&h=170)
![[Metal Repair / Build-Up Putty] Belzona 1111 Super Metal / Construction Examples](https://image.www.ipros.com/public/catalog/image/01/75b/428875/IPROS01475811792391390478.jpeg?w=120&h=170)
Company information
430 billion yen What do you think this amount represents? This is the total cost incurred in Japan due to corrosion over the course of one year (as per a 2015 survey). To reduce this enormous cost of corrosion prevention, we, Japan Molecular Services Co., Ltd., provide solutions through the British maintenance product "Belzona." Since our founding in 1980, we have been active as the "unsung hero" of domestic plants. Belzona products are used by various users in over 120 countries around the world, truly supporting the foundation of various infrastructures that are essential for global manufacturing and daily life. We value limited resources and continue to strive under the themes of "challenge" and "trust" to support the creation of a gentle environment for people and the planet.