A simple chassis cleaning unit that does not require floor construction! It can be easily set up and used only when needed.
The underbody cleaning system, which previously required extensive equipment and installation work, can now be easily set up by simply placing the unit on the ground, allowing for underbody cleaning of vehicles. The nozzle is rotary (and can be equipped with a straight nozzle for powerful and thorough cleaning at a distance), making it compact while still achieving effective cleaning with a low water flow. When combined with a hot water cleaning machine, it is also effective for removing salt and calcium. 【Features】 ■ Low cost as it only needs to be placed on the floor ■ Self-propelled for centralized cleaning ■ Various operation methods available, including remote control and automatic cleaning with ultrasound *For more details, please download the PDF or feel free to contact us.
Inquire About This Product
basic information
Unlike the conventional fixed or swinging fan-shaped nozzles, this system uses two straight nozzles (or narrow-angle nozzles) attached to a rotor that rotates horizontally under the water pressure of the cleaning water, effectively removing mud, snow, and de-icing agents from the lower part of the vehicle. Since it does not diffuse the spray, there is minimal loss of pressure and temperature, allowing the cleaning water ejected from the nozzles to effectively reach the cleaning surface. The cleaning power is not significantly affected even if the distance from the cleaning surface is somewhat greater, enabling a wide area of cleaning with fewer nozzles. This also reduces the amount of water consumed per vehicle wash. A three-nozzle system is also available to accommodate different vehicle sizes. When not in use, it can be stored indoors, making it easy to prevent freezing during winter.
Price information
-
Delivery Time
P3
Applications/Examples of results
Automobile repair shops, transportation companies, truck terminals, food factories and meat centers, livestock barns, and entrances to construction sites.
Detailed information
-
UW-2 Recommended for cleaning the undersides of light vehicles, regular cars, and vehicles up to about 2 tons. The nozzle rotates vertically, providing a spray angle of 180 degrees. Exceptional cleaning power is achieved by using either a straight nozzle or a narrow-angle nozzle.
-
Operation of UW-2 By vertically rotating 2 to 3 rotary nozzles, the lower part of the vehicle is powerfully cleaned. Unlike fixed nozzles like fan-shaped ones, it achieves a 180-degree spray angle, allowing for extensive cleaning with fewer nozzles, which saves water. The nozzles are rotated by the sprayed water, resulting in a simple structure with excellent durability. Additionally, the use of straight nozzles minimizes temperature loss after spraying in hot water cleaning, effectively removing dirt, snow, and de-icing agents, and is also effective for disinfection against avian influenza and other pathogens.
-
Examples of buried type usage Here is an example of a buried type. A slightly more elaborate version where a trench is dug in the ground and a drain is embedded.
-
Additional Example of Side Cleaning This is a system that allows for easy cleaning of the vehicle's sides. When combined with the underbody cleaning unit, it enables comprehensive cleaning of the underside all at once. Installing it at the entrances of food factories will serve as a powerful ally in preventing the spread of avian influenza.
-
System Example Controls the cleaning of the lower part of the vehicle via a control panel. We can accommodate various requests such as sensor detection type, timer type, remote control type, and coin-operated type. When installed at the entrances and exits of food factories, it is effective in preventing the spread of avian influenza. Additionally, by installing it at the entrances and exits of various factories, it can prevent the spread of mud and other contaminants outside the facility, contributing to environmental protection.
-
UW-2 Small Vehicle Underbody Cleaning Unit Easily cleans the underbody of vehicles ranging from regular cars to those around 2 tons. Simple installation by connecting to a high-pressure washer and setting up this product with a high-pressure hose. Achieves a 180-degree spray angle with 2 to 3 rotating nozzles that spin vertically. This allows for effective cleaning of the underbody with just 2 to 3 nozzles, contributing to water conservation due to the reduced number of nozzles. Additionally, the nozzles rotate due to the water pressure of the spray, resulting in a simple structure with excellent durability.
-
Buried-type vehicle underbody cleaning device The UWB-3 is a buried device styled to be embedded in the ground. Under the grating, there is a trough, and the cleaning water and dirt are discharged through this trough. Some installation work, such as trenching and concrete, is required, but it can be installed very economically as a permanent fixture.
Line up（2）
| Model number | overview |
|---|---|
| UW-2 | For standard vehicles to medium-sized vehicles |
| UW-30BRN | For large vehicles |
catalog（2）
Download All Catalogs
Company information
Since the development of Japan's first steam cleaner in 1952, we have not viewed cleaning machines merely as tools for cleaning, but as partners in improving the global environment. We have thoroughly pursued not only performance aspects such as performance, functionality, and durability, but also the development and production of cleaning machines powered by clean energy, as well as pollution-free and recyclable processes from production to disposal. Through this pioneering spirit and accumulation of technology, we have achieved an exhaust emission value that is nearly zero, despite using kerosene in our Narutotype. Furthermore, we have developed environmentally friendly hot water cleaning machines such as the "Yusen," a clean, safe, and quiet high-pressure hot water cleaner powered by nighttime electricity with zero NOx emissions, and the gas-powered high-pressure hot water cleaner "Gas Wash."
