(Free) Instron WEB Seminar Series: Fatigue Testing Machine Series: Features of Electric Drive Fatigue Testing Machines and Their Application to Biological Materials

Supports testing using a constant temperature bath! Reduces energy consumption by minimizing test time.

"WaveMatrix" utilizes self-heating control software for test specimens to optimize test frequency, thereby improving the productivity and consistency of tests related to composite materials and polymer materials. It is possible to reduce test time while achieving unprecedented accuracy in test temperature. This patented system achieves and maintains the specified test temperature by changing the test frequency according to the measurement temperature of the test specimen. In structural composite materials, the impact of a 5°C temperature change is greater than a change in frequency by a factor of two, making the benefits of strict test temperature control significantly higher than moderate frequency fluctuations. [Features] - User-defined temperature range (controllable up to ±0.5°C) - User-defined frequency range - Thermocouple data input via USB is possible - Analog input of 0-10V for thermocouple data, including infrared thermometer data, is possible - Thermocouples can be installed according to the shape of the test specimen *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

E20000 has been newly added! Dynamic fatigue testing machine that adopts linear motor technology, eliminating the need for hydraulic oil, energy-saving, and low noise.

"ElectroPuls" is an electric fatigue testing machine that utilizes linear motor technology (patented) based on approximately 13 years of testing experience. It features a wide performance range capable of conducting static, dynamic, and fatigue tests, making it an ideal system for various laboratories and testing facilities. It can also be used for testing biomaterials and medical devices. In addition to a variety of testing accessories, the new "E20000" can perform both dynamic and static tests with a single unit. Depending on the application, we offer a lineup of uniaxial systems up to 10kN and 100Nm, as well as linear/torsion (biaxial) options. There are three sizes available for selection based on your needs. Our product meets your testing requirements in a simpler, smarter, and safer way. 【Features】 ■ No hydraulic oil required ■ Energy-efficient ■ Low noise ■ Space-saving ■ No complex and costly maintenance required 【Software Used】 WaveMatrix2 *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Simultaneous testing of up to 16 specimens is possible! Easy access for specimen insertion, preloading, and adjustments.

The "ElectroPuls 16 Station" is a testing system that significantly reduces testing time and contributes to the rapid market introduction of products. It allows simultaneous testing of tensile, compression, and bending tests with up to 16 specimens. Finished products or individual components, such as NiTi single diamond struts, can be uniformly tested at each station due to easy setup and simple preload adjustments. 【Features】 - The adoption of inline button-type load cells allows for precise adjustment of specimens close to the testing fixture. - There are no alignment errors on the XY axis during adjustments or preload at each station. - Each individual push rod can be adjusted by ±5mm for easy insertion and adjustment of specimens. - Anyone can accurately apply uniform preload across all 16 stations. - No specialized knowledge is required. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Dynamic linear load capacity ±10kN / dynamic torque capacity ±100Nm! The required floor space for the frame is less than 0.8m².

The E10000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring linear-torsion type technology. It is equipped with advanced digital control electronics from Instron, a Dynacell load cell for biaxial testing, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at up to 100Hz - Operable on single-phase main power, no hydraulic or pneumatic sources required *For more details, please refer to the PDF document or feel free to contact us.*

• Other measuring instruments

Dynamic linear load capacity ±3000N / static load capacity ±2100N! The required desk space for the frame is less than 0.3, making it compact.

The "ElectroPuls E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It operates on a single-phase power supply and does not require additional utilities (such as compressed air, hydraulic pressure, or cooling water supply) for basic machine operation. Equipped with advanced digital control electronics, DynacellT load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Unlockable to allow for rotational freedom of the actuator, providing flexibility in testing ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Dynamic linear load capacity ±3000N / dynamic torque capacity ±25Nm! The required desk space for the frame is less than 0.3m².

The "E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring a linear-torsion type design. Equipped with advanced digital control electronics, dual-axis Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Separate linear/rotary actuators ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating above 100Hz ■ Dynamic linear load capacity: ±3000 N / Dynamic torque capacity: ±25 Nm *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

A variety of hydraulic servo test systems with different capacities and applications, along with a wealth of applications and fixtures!

This catalog introduces the hydraulic servo fatigue testing systems handled by our company. It features a compact tabletop model "8872 (25 kN)" that meets the high demands of various static and dynamic testing requirements, as well as "8803 (500 kN)" and the controller electronics "8800MT." We also showcase a wealth of applications, so please take a look. 【Featured Products (Excerpt)】 ■ 8872 (25 kN) Fatigue Testing System ■ 8874 (25 kN/100 Nm) Fatigue Testing System ■ 8801 (100 kN) Fatigue Testing System ■ 8862 (100 kN) Low Cycle Fatigue Testing System ■ 8802 (250 kN) Fatigue Testing System *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators
• Other measuring instruments

Dynamic load capacity maximum ±10kN / Static load capacity ±7kN! The required floor space for the frame is less than 0.8m², making it compact.

The "ElectroPuls E10000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. Equipped with Instron's advanced digital control electronics, Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at up to 100Hz ■ Operates on single-phase main power supply, no hydraulic or pneumatic sources needed ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Dynamic load capacity ±1000N / Static load capacity ±710N! The required desk space for the frame is less than 0.15m².

The "ElectroPuls E1000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It features advanced digital control electronics from Instron, Dynacell load cells, console software, and a new testing technique based on the stiffness of the specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology (patented) that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Dynamic load capacity: ±1000 N / Static load capacity: ±710 N ■ Operates on single-phase main power supply, no hydraulic or pneumatic sources needed *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Sekisui Filler Co., Ltd. will be exhibiting at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Car Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coating agents - Optical adhesives We sincerely look forward to your visit.

Are you facing challenges where salary increases don’t necessarily lead to higher take-home pay? In this seminar, together with a certified social insurance and labor consultant, we will explore future HR strategies from both perspectives: system design and practical implementation. ✔ HR strategies under inflationary pressure ✔ Rethinking compensation and benefits design ✔ Real case studies for improving hiring & retention ✔ The concept of the “third wage increase” and how to apply it ―――――――――― ■ Event Details Date: May 27, 2026 (Wed) 18:30–20:00 Location: Kort Valuta Inc. (Shibuya, Tokyo) Fee: Free ―――――――――― ▼ Register here https://forms.gle/SByk7qn7VZRPuEZs8 ▼ Learn more (Press Release) https://prtimes.jp/main/html/rd/p/000000107.000076589.html #HR #HumanResources #EmployeeEngagement #Compensation #Benefits #Fintech

Hello! This is OK-DEPOT. We would like to introduce "EM Cellulose Fiber," made from newspaper, for those struggling with the soaring prices and order suspensions of insulation materials! We encourage you to participate. *Please note that we may decline participation from competitors or those in the same industry. ★Recommended for: - Those facing difficulties due to the soaring prices and shortages of insulation materials caused by the situation in the Middle East. - Those looking for insulation materials that can reduce living noise. - Those who want to create a space to enjoy hobbies without worrying about noise coming from outside or from other rooms. <How to Participate> This seminar will be held online (via the Zoom web conferencing system). You can participate from anywhere using your usual computer, smartphone, or tablet. Even if you have never used it before, you can easily connect by clicking the URL in the invitation email. (It takes about 3 minutes.) After applying, please enter the seminar using the invitation email that will be sent to you the day before the event. *To deliver valuable information to your company, we require video to be ON. If we cannot confirm that your video is ON, you may be asked to leave. Thank you for your understanding. *For quality improvement, the seminar will be recorded.

Solar power generation is entering a scalable era— Have you given up on introducing solar power generation, or are you thinking, "I want to implement it more smoothly"? "Installation constraints," "enormous costs," "prolonged procedures"... By breaking through the "grid connection barriers" that hinder such introductions, you can start with what you need and expand your facilities flexibly as your business grows. The next-generation "distributed power source = off-grid system" makes such "scalable" solar power generation a reality. In this webinar, we will thoroughly explain the mechanism of "non-grid-connected self-consumption" that is not bound by existing frameworks, and present new options and the latest case studies to solve management challenges. We invite everyone considering the introduction of solar power generation to participate!

Tokyo Big Sight (West Hall 1-2) Booth Number: G13-31 Event Dates: May 13 (Wed) - 15 (Fri), 2026 Opening Hours: 10:00 AM - 5:00 PM We will be showcasing our earthquake preparedness products. Live demonstrations of the actual products will be conducted, so please come and take a look if you're interested. We look forward to your visit.