Announcement of the publication of Aqua System "Product Catalog Vol. 22" (2022 Edition)

For the transfer of low-viscosity oils such as kerosene, light oil, and biodiesel.

**EMH Series** EMH-20FC (For oil, kerosene, diesel, biodiesel / Pump only) EMH-20SUS (For oil, kerosene, diesel, biodiesel, solvents / Pump only) EMHH-20FC (For oil, kerosene, diesel / Hose at both ends) EMHD-20FC (For oil, kerosene, diesel / For drum) EMHD-20SUS (For oil, kerosene, diesel, biodiesel, solvents / For drum) **Advantages** ● Continuous operation possible ● Can transfer kerosene and diesel without selecting containers ● Ideal for transferring biodiesel oil ● Low vibration and low noise **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Equipped with a relief valve (0.1MPa), vane pump ● Various customizations available for drum and hose connections. *Note: SUS type cannot be used with water or solvents.*

• pump

[For oil, kerosene, light oil, and biodiesel / for drums] Electric handheld pump for transferring low-viscosity oils such as kerosene, light oil, and biodiesel!

**EMH Series** EMHD-20FC (for oil, kerosene, diesel / drum can) EMHD-20SUS (for oil, kerosene, diesel, biodiesel, solvent / drum can) **Benefits** ● Continuous operation possible ● Can transfer kerosene and diesel without selecting containers ● Ideal for transferring biodiesel oil ● Low vibration and low noise **Features** ● Dedicated to JIS standard 200L closed drum cans (large cap G2) ● Equipped with relief valve (0.1MPa) and vane pump ● Various customizations available for drum can and hose connections *Note: SUS type cannot be used for water or solvents.* **Mechanism of EMH Pump** The center of the pump body is slightly offset from the center of the impeller, creating a structure where the movable vanes extend outward due to centrifugal force. This adopts a principle of operation that increases pressure by reducing volume with the vanes. Additionally, the EMH series uses Teflon and fluorine for the packing, allowing for the transfer of biodiesel.

• pump

For transferring low viscosity oils such as kerosene, light oil, and biodiesel! Electric handheld pump.

**EMH Series** EMH-20FC (for oil, kerosene, diesel, biodiesel / pump only) EMH-20SUS (for oil, kerosene, diesel, biodiesel, solvents / pump only) EMHH-20FC (for oil, kerosene, diesel / both ends with hose) **Advantages** ● Continuous operation possible ● Can transfer kerosene and diesel without selecting containers ● Ideal for transferring biodiesel oil ● Low vibration and low noise **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Equipped with a relief valve (0.1MPa), vane pump ● Various customizations available for drum cans and hose connections *Note: The SUS type cannot be used with water or solvents.* **Mechanism of EMH Pump** The center of the pump body is slightly offset from the center of the impeller, creating a structure where the movable vanes extend due to centrifugal force. It adopts a principle of operation that increases pressure by reducing the volume with the vanes. Additionally, the EMH series uses Teflon and fluorine for the packing, allowing for the transfer of biodiesel.

• pump

An air-operated handheld pump that can be used in explosion-proof areas and is easy to carry. For transferring liquids from tanks or drums of kerosene, diesel, etc.

《AMVH Series》 AMH1-20FC (For oil, kerosene, diesel, biodiesel / Pump only) AMH1-20SUS (For solvents / Pump only) AMH1D-20FC (For oil, kerosene, diesel / For drum) AMH1H-20FC (For oil, kerosene, diesel / Hose at both ends) AMH1D-20SUS (For solvents / For drum) ◎ Explosion-proof design that does not use electricity ◎ Usable without sealing the drum ◎ Customizable 《Benefits》 ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Safe due to air-driven operation with no electric leakage ● Can be used as a circulation pump due to continuous operation capability 《Features》 ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Available in types for drums and hose connections

• pump

Radial piston vane pump, suitable for use in explosion-proof areas and easy to carry! For transferring liquids from tanks or drums such as kerosene and light oil.

**AMVH Series** AMH1-20FC (for oil, kerosene, diesel, biodiesel / pump only) AMH1D-20FC (for oil, kerosene, diesel / for drums) AMH1H-20FC (for oil, kerosene, diesel / hose at both ends) ◎ Explosion-proof design that does not use electricity ◎ Usable without sealing the drum ◎ Customizable **Benefits** ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Safe due to air-driven operation with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability **Features** ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Available in types for drums and hose connections **Mechanism of Radial Piston Motor** A motor that operates by alternately compressing air into three pistons. With three pistons built in, it is characterized by high discharge pressure. It can transfer high viscosity liquids (up to 2,000 cP) within a height and distance of 15m.

• pump

Air-operated diaphragm pump capable of transferring high-viscosity oils and flammable liquids to high places or over long distances for solvent/drum use.

"DF Series" *AS, SUS DF4D-20AS (for solvents / for drums) DF6D-20AS (for solvents / for drums) DF6D-20SUS (for solvents / for drums) ◎ Explosion-proof design that does not use electricity ◎ Compatible with high-viscosity liquids ◎ Can be used without sealing the drum ◎ Powerful discharge "Benefits" ● Efficient transfer of high-viscosity liquids ● Safe transfer of flammable liquids ● Ideal for horizontal and high-lift transfer ● Can be used as a circulation pump due to continuous operation capability "Features" ● Dedicated to JIS standard 200L closed drums (large plug G2) ● High lifting capacity ● Diaphragm pump (with pulsation)

• pump

For oil, kerosene, light oil, and gasoline / both ends of the hose: High-viscosity oils and flammable liquids can also be transported to high places or long distances.

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Can be used as a circulation pump due to continuous operation capability 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●High lifting capacity ●Diaphragm pump (with pulsation)

• pump

High-viscosity oils and flammable liquids can be transported to high places or long distances for oil, kerosene, diesel, and gasoline/drum cans.

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Can be used as a circulation pump due to continuous operation capability 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●High lifting capacity ●Diaphragm pump (with pulsation)

• pump

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for the transfer of solvents in areas where open flames are prohibited.

**CHD1 Series** CHD1-20ASUS (for solvents) CHD1-20ASUS-V (for solvents / with ball valve) CHD1-20ASUS-N (for solvents / with gun nozzle) ● Oil-free air motor type ● Lightweight and compact body ● Inexpensive **Features** ● Safe and secure due to air drive ● Dedicated for JIS standard 200L closed drum (large plug G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 20L/min (with nozzle) ● Discharge only **Applications** Not only used in metal plating factories and semiconductor manufacturing, but also in chemical plants, pharmaceutical warehouses, and more. It is also used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flame areas, please use the air model (CHD1-20ASUS-N). **Can be used in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, home appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Alcohol ■ Thinner ■ Acetone ■ Methanol ■ MEK, etc.

• pump

Solvent use: High flow rate, high head pressure-resistant explosion-proof motor pump! For the transfer and dispensing of flammable liquids (electric explosion-proof motor pump).

**EMM Series** EMM-25PP (for solvents) EMM-25SUS (for solvents) **Advantages** ● High discharge volume and high lift pressure-resistant explosion-proof motor pump ● Liquid transfer and small packaging in fire hazard areas ● High performance with 40L per minute and a lift height of 8m ● Suitable for transferring and small packaging of gasoline (EMM-25SUS) **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Equipped with pressure-resistant explosion-proof motor (d2G3) ● For low viscosity liquids (below 50cp) *Note: The outlet is not explosion-proof.*

• pump

AdBlue for purifying diesel exhaust gases When you want to quickly portion out AdBlue from a resin drum.

"HRB Series" HRB-20P (for AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction and agricultural machinery, and needs change, we are currently developing and importing AdBlue products suitable for Japan to respond to customer feedback. ◎ Hand-operated pump that requires no power source 《Benefits》 ● Lightweight and compact, easy to use due to hand-operated design ● Optional attachment for a high-power hose available ● Cost-effective and reduces expenses 《Features》 ● Designed specifically for JIS standard 200L closed drums (large cap G2) * Optional adapter specifications available in Kodama resin and Sanko ● Hand rotary type ● Discharge pipe made of durable stainless steel

• pump

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

"AdBOX Series" AdBOX (for AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suitable for Japan to respond to customer feedback. "Benefits" ● Easy to carry with a portable design ● Can be powered from heavy machinery or vehicle batteries ● Compact yet delivers 25L per minute ● Ideal for refueling large vehicles such as cargo trucks, construction machinery, and agricultural machinery "Features" ● AdBlue pump set that fits in one box ● DC-24V

• pump

For transporting fuel and water in places without power or during emergencies. Despite being a manual pump, it has excellent suction capability.

**HDO Series** - HDO-20ALA (for oil, kerosene, diesel, and water / hose nipple specification) - HDO-20(25)ALB (for oil, kerosene, diesel, and water / threaded connection specification) - HDO-20ALOZ (for oil, kerosene, diesel, and water / coupler connection specification) - HDO-32(40)ALB (for oil, kerosene, diesel, and water / threaded connection specification) - HDO-20(30P) (for water and seawater / hose nipple specification) - ST-HDOS-32(40)ALB (for oil, kerosene, diesel, and water / threaded connection specification) - KT-HDOS-32(40)ALB (for oil, kerosene, diesel, and water / threaded connection specification) - HDO-50 (for oil, kerosene, diesel, and water / threaded connection specification) ◎ For emergency water supply pump ◎ Easy operation **Benefits** ● Performance of 8m suction (no priming required) and 8m discharge (HDO-32/40ALB has 5m suction and 7m discharge, HDO-50AL has 4m suction and 7m discharge) ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil **Features** ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble

• pump

A manual hand diaphragm pump that is ideal for transporting fuel and water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

**HDO Series** HDO-20ALA (For oil, kerosene, light oil, and water / Hose nipple specification) HDO-20(25)ALB (For oil, kerosene, light oil, and water / Screw connection specification) HDO-20ALOZ (For oil, kerosene, light oil, and water / Coupler connection specification) ◎ For emergency water supply pump ◎ Easy to operate **Benefits** ● Performance of 8m suction (no priming required) and 8m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil **Features** ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble **Applications** ● Water supply and drainage pump for disaster situations ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge and emergency equipment for ships and boats ● Rainwater utilization system for households ● Waste cooking oil collection

• pump

Introducing cleaners that can filter cutting fluid without stopping the machine and cleaners that can be used for cleaning during setup time!

Since its establishment in 1957, our company has been responding to the diverse needs of various customers related to liquid management in factories, from light oil and oil to chemicals and food, with the motto "Small but spicy like sansho pepper." This time, we would like to introduce the "Air-Powered Tank Cleaning and Filtration Cleaner," which reduces the burden of daily cleaning of cutting fluid tanks! ■ Do you have any of these concerns? - Inefficiency due to machine stoppage during cleaning - Difficulty in collecting and disposing of cutting fluid - Time and cost involved in tank cleaning - Frequent breakdowns of electric vacuum cleaners * We have a wide range of products tailored to your needs. * For details, please request our materials or view the PDF data available for download! ~ Regarding the demo machine rental service mentioned ~ * As of August 1, 2019, the demo machine rental service has generally been discontinued. We apologize for any inconvenience this may cause and appreciate your understanding.

• pump

A vacuum cleaner for collecting oil and metal shavings in a pail. Now more convenient with a hand switch.

**APPQO Series** APPQO550AH (For oil / Wet and dry use / With hand switch) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options **Benefits** ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition ● No hassle of manually operating a valve upon return ● Can be turned ON only when needed ● Does not waste air ● Easy one-handed operation **Features** ● For collection only (general oil, oil, chips, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• pump

A vacuum cleaner for collecting oil and metal shavings in a bucket. It is convenient for site cleaning as it can be used for both dry and wet applications.

"APPQO Series" APPQO400S (For oil / Wet and dry use) APPQO400 (For oil / Wet and dry use) APPQO400G (For kerosene and light oil / Wet and dry use) APPQO400AS (For solvents / Wet and dry use) ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas with no risk of ignition "Features" ● Dedicated for collection (general oil, oil, chips, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 3 horsepower (2.25kw) or more

• pump

All stainless steel, won't rust even in water.

**AVC Series** AVC-550SUS (for water and water-soluble liquids / wet and dry use) AVC550SUS-SET (for water and water-soluble liquids / wet and dry use / vacuum cleaner set) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options **Benefits** ● Can be used simply by placing it on a commercially available pail (stainless steel can (APPQO-SK) recommended) ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition **Features** ● Dedicated for collection (general oil, water, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pail (recommended for top outer diameter of 300mm±1, plate thickness of 0.4mm or more) * Stainless steel can (APPQO-SK) recommended ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• pump

A vacuum cleaner for collecting oil and metal shavings in a pail can. It is convenient for site cleaning as it is suitable for both dry and wet use.

《APPQO Series》 APPQO550S (For oil / Wet and dry use) APPQO550 (For oil / Wet and dry use) APPQO550-SET (For oil / Wet and dry use / Vacuum cleaner set) ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, chips, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• pump

Minimum recovery particle size of 5.5μ for powder collection. Powder and dust recovery rate of over 98%.

《APPQO Series》 APPQO-CY25 (for dust) APPQO-CY32 (for dust) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for dust collection ● Compatible with JIS standard 20L open pails (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Standard equipped with grounding wire ● Uses anti-static hose ● Usable with cyclone-type drums of 50L, 100L, and 200L * Not to be used for materials that pose a risk of dust explosion (metal powders, aluminum powders, toner, etc.) * As it is an industrial vacuum cleaner, it cannot be used for powders that directly enter the human body (food powders, medicines, etc.)

• pump

Electric vacuum cleaner for collecting oil and metal shavings in a bucket. Convenient for site cleaning as it is suitable for both dry and wet use.

"EVC Series" EVC550 (for oil / for both wet and dry use) EVC550-SET (for oil / for both wet and dry use / vacuum cleaner set) ◎ Easy operation ◎ Continuous operation possible ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry use "Features" ● Dedicated for collection (general oil, oils, metal shavings, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness 0.4mm or more) ● Automatic stop when liquid is full ● Can be used with a 100V power supply, making it versatile for any location ● Also available in 200V specifications * Please regularly clean the filter inside the cover.

• pump

A new filter ideal for chip recovery has arrived! A must-see for customers using NC lathes and machining centers!

Cleaning time for our conventional stainless steel filters When dirt is severe, it takes about 30 minutes or more, now reduced to just a few minutes! *The time is an approximate guideline and may vary depending on the cleaning method, environment, and usage conditions. ◎ Filter cleaning has become easier ◎ It now includes a dewatering function ◎ Compatible with both stainless steel and non-woven fabric types *Not included with the main unit and sold separately. 【Compatible Products】 ■ Air-operated circulating filtration cleaner 'J-F Series' 　＜J-FS＞ For chips, SUS filter type 　＜J-FF＞ For polishing, non-woven fabric filter type ■ Air-operated tank cleaning filtration cleaner 'APDQO Series' 　＜APDQO-FS＞ For chips, SUS filter type 　＜APDQO-FF＞ For polishing, non-woven fabric filter type

• pump

[For oil / wet and dry use] Large capacity high-speed drum vacuum cleaner, maximum 200L

◎ Simple structure that is trouble-free ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a drum with a top plate ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, cutting chips, etc.) ● Specifically for JIS standard 200L open drums ● Automatic stop when liquid is full ● Usable with air compressors of 10 horsepower (7.5 kW) or more ● Recommended air hose size is 3/8 or larger 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting and cutting oil in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Solvent / Wet and Dry Use: A vacuum cleaner that can collect solvents and metal shavings! Convenient for on-site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less likely to break compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Designed for collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

[For kerosene and light oil / Wet and dry use] A vacuum cleaner that can collect kerosene and light oil! Convenient for site cleaning due to its wet and dry capabilities.

◎Simple structure, trouble-free ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump ●Less likely to break compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for collection (general oil, oil, metal shavings, etc.) ●Compatible with JIS standard 20L open drums (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oil in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

Oil and wet/dry vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure with no risk of failure ◎ Easy to operate ◎ Convenient options 《Advantages》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, trouble-free ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎Simple structure, no breakdowns ◎Easy to operate ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump ●Less prone to breakdown compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Designed for collection only (general oil, oil, metal shavings, etc.) ●Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and shavings in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Environmentally friendly oil dispersants, industrial high-performance oil cleaners, cleaning, cleanliness, cleaning, cleaner, cleaning, adsorption, decomposition, environmentally friendly, nature conservation.

"Oil Remover Cleaner Series" ● 3.78 liters (1 gallon) ● 1 liter "Features" ● Cleaning Performance Not only removes mud, lubricants, oil, dust, wax, paint, ink, soot, stains, etc. that adhere to surfaces or penetrate gaps, but can also be used as an industrial cleaner. ● Impact on Substrates The oil remover cleaner uses environmentally friendly raw materials, so it will not damage or corrode the surfaces of substrates such as metal, plastic, rubber, ceramics, concrete, or wood. ● Biodegradability The removed oils are biodegradable by safe natural bacteria included in the formulation. *Please dilute as needed for use in sprays or other applications.

• pump

A vacuum cleaner for collecting oil and metal shavings in a pail. Now more convenient with a foot switch.

"APPQO Series" APPQO550AF (For Oil / Wet and Dry Use / Foot Switch Included) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition ● Operable while standing ● Easy ON/OFF with just a foot press ● No unnecessary movements, no waste of air consumption ● Both hands are free, increasing work efficiency "Features" ● For collection only (general oil, oil, metal shavings, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• pump

Collects everything from small stones to paper scraps. An environmentally friendly, battery-free push cleaner.

**AJL Series** AJL360 ◎ No power source required It can be used simply by pushing it while walking. It is an ideal cleaner for beautifying not only inside factories but also around factories and on roads. It is a simple manual sweeper that can collect sand, small stones, hair, breadcrumbs, and paper scraps. ◎ Equipped with two standard brushes The brushes are installed on both sides, allowing them to pick up fine dust even in corners. The brushes can be easily replaced. The rotating action helps to expand the area for collecting debris. **Benefits** ● Manual operation means no power source needed ● No power cord, making it usable on roads and in parks ● Just push and walk, easy to operate for women and the elderly ● Comes with a collection bucket, allowing disposal without getting hands dirty ● Equipped with roller brushes for collecting fine debris **Features** ● Collects debris simply by pushing ● No power source required ● Two brushes included as standard ● Easily accessible dust box for collection ● Adjustable handle height ● No backflow of debris with side brushes ● Can be stored upright, saving storage space

• cleaning

Cutting fluids for machine tools can be reused! Tank cleaning time is drastically reduced!

**APDQO Series** APDQO-FF100 (Non-woven Fabric Filter) APDQO-FS100 (Stainless Steel Filter) APDQO-FB100 (Bag Filter) ◎ Does not use electricity ◎ Automatically stops when full ◎ Equipped with a safety valve as standard **Benefits** ● Enables reuse of cutting fluid ● Improves tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes **Features** ● Designed specifically for JIS standard 200L open drums ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of cleaning tanks of machine tools, as well as filtering and separating 'liquids' and 'solids'. Therefore, in addition to filtering chips and sludge from machine tools, it can be used in the following ways: ● Cleaning machine tool tanks (removing chips and sludge and reusing cutting fluid) ● Separating and sorting food waste in food processing plants (restaurants) ● Separating water and sludge from mountains and rivers ● Separating and sorting waste and sewage

• others

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure that is trouble-free ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum, functioning as an inhalation pump as well ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, making it safe for use in explosion-proof areas without fire risk 《Features》 ● Designed for collection only (general oil, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp, paper, and printing factories Collection of cuttings in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Electric vacuum cleaner for oil and wet/dry use! Convenient for site cleaning as it can collect oil and metal shavings.

◎Easy operation ◎Continuous operation possible ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a vacuum cleaner and a wet/dry pump 《Features》 ●For collection only (general oil, oil, metal shavings, etc.) ●Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1 for the top, with a plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with a 100V power supply, making it versatile for any location ●Also available in 200V specifications *Please clean the filter inside the cover regularly 《Applications》 Cleaning around equipment in automotive repair shops and vehicles Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Collection of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Collection of sludge and wastewater from septic tanks and pits Collection of welding spatter Collection of grease traps and floating oil

• pump

Electric vacuum cleaner for oil and wet/dry use! Convenient for site cleaning as it can collect oil and metal shavings.

◎Easy operation ◎Continuous operation possible ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump 《Features》 ●Designed for collection only (general oil, oil, chips, etc.) ●Compatible with JIS standard 20L open drums (recommended outer diameter 300mm±1, plate thickness 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with a 100V power supply, making it versatile for any location ●Also available in 200V specifications *Please clean the filter inside the cover regularly 《Applications》 Cleaning around equipment in automotive maintenance shops and vehicles Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

For dust collection: Minimum recovery particle size 5.5μ! Powder and dust recovery rate over 98%.

◎Simple structure, no worries about breakdowns ◎Easy to operate ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Continuous operation possible ●Less prone to breakage compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for dust collection ●Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Standard equipped with grounding wire ●Uses anti-static hose ●Can also be used with cyclone-type drums of 50L, 100L, and 200L *Not to be used with materials that pose a risk of dust explosion (metal powders, aluminum powders, toner, etc.) *As this is an industrial vacuum cleaner, it cannot be used with powders that directly enter the human body (food powders, medicines, etc.)

• pump

【For water and water-soluble liquids / Wet and dry use】All stainless steel, rust-resistant even in water.

◎Simple structure with no failures ◎Easy to operate ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail (stainless steel can (APPQO-SK) recommended) ●Can operate continuously ●Usable as both a wet and dry suction pump and a vacuum cleaner ●Less prone to breakage compared to electric vacuum cleaners ●Air-driven, making it safe for use in explosion-proof areas with no risk of ignition 《Features》 ●For collection only (general oil, water, oil, metal shavings, etc.) ●Compatible with JIS standard 20L open pail (recommended for top outer diameter of 300mm±1 and plate thickness of 0.4mm or more) *Stainless steel can (APPQO-SK) recommended ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM

• pump

【For water and water-soluble liquids / Wet and dry use】All stainless steel, rust-resistant even in water.

◎Simple structure, no failures ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail (stainless can (APPQO-SK) recommended) ●Continuous operation possible ●Can be used as both a wet and dry vacuum and an intake pump ●Less prone to breakage compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for collection (general oil, water, oil, metal shavings, etc.) ●Compatible with JIS standard 20L open pail (recommended for top outer diameter of 300mm±1 and plate thickness of 0.4mm or more) *Stainless can (APPQO-SK) recommended ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM

• pump

Reusing cutting fluids for machine tools and tank cleaning.

**APDQO Series** APDQO-FF (Non-woven Fabric Filter) APDQO-FS (Stainless Steel Filter) APDQO-FB (Bag Filter) ◎ No electricity used ◎ Automatic stop when full ◎ Equipped with a safety valve as standard **Benefits** ● Reuse of cutting fluid is possible ● Improved tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes **Features** ● Dedicated to JIS standard 200L open drum cans ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of not only cleaning tanks of machine tools but also filtering and separating 'liquids' and 'solids'. Therefore, it can be used for purposes other than filtering chips and sludge from machine tools, such as: ● Cleaning of machine tool tanks (removal of chips and sludge and reuse of cutting fluid) ● Separation and sorting of food waste in wastewater at food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• others

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**J-F Series** J-FF (Non-woven Fabric Filter) J-FS (Stainless Steel Filter) J-FB (Bag Filter) ◎ Does not use electricity ◎ Can be cleaned without stopping the machine ◎ Mesh can be changed as an option **Benefits** ● Cleaning can be done without stopping the machine ● Reuse of cutting fluid is possible ● Improved tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes ● Compact design allows work in tight spaces **Features** ● Diaphragm circulation type ● Continuous operation possible ● Filters available to match cutting fluid *Please be sure to use an air filter lubricator.* **Applications** ● Cleaning of machine tool tanks (removal of chips and sludge, reuse of cutting fluid) ● Separation and sorting of food waste in food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• pump

Introducing the "Tank Cleaning and Filtration Cleaner" for customers using NC lathes and MC lathes, designed to reduce work burden and achieve efficient cutting fluid management.

Are you facing any of these cleaning issues? - Cleaning tasks are cumbersome and labor-intensive, causing back pain. - Long hours of cleaning lead to unpleasant odors. - Machines have to be stopped during cleaning, reducing productivity. - Accumulation of chips leads to unstable processing accuracy and defective products. Accumulation of chips and sludge can shorten the lifespan of machine tools and increase manufacturing costs. That's where our "Filtration Cleaner" comes in as a solution! The key to the solution is the introduction of a "Filtration Machine"! We have prepared the following two types according to your needs. 1. Large Capacity Open Drum Type (APDQO-F Series) This model is compatible with 200L or 100L open drums. - Reuse of cutting fluid: Efficiently reuse by filtering chips. - Improved cleaning efficiency: Significantly reduce work time. - Versatile application: Can also filter liquids other than those from machine tools. - Thorough management: Completely drain liquids to keep the tank clean. 2. Compact Circulation Type (J-F Series) This model is suitable for work in narrow spaces. - Maintain production efficiency: Work can be done without stopping the machine. - Space-saving design: Easy to install even in tight areas. - Continuous maintenance: Regular filtration keeps cutting fluid clean at all times.

• pump

[Hose Nipple Specification] Usable in various situations from daily water transfer to securing water during disasters! Despite being a manual pump, it has excellent suction capability.

◎Emergency water supply pump ◎Easy to operate 《Benefits》 ● Performance of 8m suction (no priming required) and 8m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency standby equipment for ships and boats ● Rainwater utilization system for households ● Used cooking oil collection

• pump

As emergency supplies for apartments and municipalities. For replenishing drinking water during disaster emergencies.

**EDO Series** - EDO-40 (for oil, kerosene, light oil, and water / screw connection type) - EDO-50 (for oil, kerosene, light oil, and water / screw connection type) - EDO-50H (for oil, kerosene, light oil, and water / screw connection type) ◎ For emergency water supply pump ◎ Easy to operate ◎ Standing action type **Benefits** ● Maximum discharge of 100L/min ● Powerful liquid transfer with 5m suction, 5m/7m/12m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Allows for work while standing **Features** ● Manual, 100V power supply ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble

• pump

For outdoor storage in cold and tropical regions. A thermal cover that protects containers from strong sunlight and rain.

《COVER Series》 JD-COVER (for drum cans) IBC-COVER (for IBC containers) P-COVER (for pumps) 《Benefits》 ● Excellent light-blocking and heat-insulating properties prevent temperature rise ● Waterproof treatment keeps out rain and wind ● Cold-resistant, preventing deterioration of containers and pumps 《Features》 ● Can be opened and closed with Velcro ● White surface, silver finish on the inside

• pump

Quickly transfer low-viscosity liquids for solvents.

◎Air-driven ◎Compatible with high-viscosity liquids 《Benefits》 ● Efficiently transfers medium-viscosity liquids ● Usable with flammable liquids and small amounts of foreign matter ● Ideal for horizontal and high-lift transfer 《Features》 ● Continuous operation possible ● Lifting capacity of 20-30m *Please be sure to use an air filter and lubricator.

• pump

Ministry of Labor explosion-proof structure standard certification! A pump that can safely transport petroleum products using a pressure-resistant explosion-proof motor.

**SFC** SFC (Gasoline, Kerosene, Diesel) A safe and secure drum pump certified under the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). **SFC Series (Explosion-Proof Motor)** When installing a gear motor in locations where there is a risk of ignition and explosion due to flammable gases and other explosive atmospheres, the motor must be one that has passed explosion-proof testing as stipulated by the Safety and Health Act. This testing system is conducted by a testing organization designated by the Minister of Health, Labour and Welfare in Japan (the Japan Industrial Safety and Health Association), which tests electrical equipment by type. Explosion-proof motors must have the optimal explosion-proof structure selected according to the type of explosive atmosphere and the degree of danger. - It is an explosion-proof pressure-resistant structure with an explosion-proof grade defined by the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). - It can discharge one drum in just 3.5 minutes and can operate continuously for 24 hours. - Usable with kerosene, diesel, and gasoline. - For use in explosion-proof warehouses (areas). **Benefits** - Can be used with gasoline - Comes with a manual gun nozzle for easy dispensing with one hand **Features** - For 200L closed drums according to JIS standards - Equipped with a pressure-resistant explosion-proof structure motor for safety

• pump

Safe and optimal pressure-resistant explosion-proof motor for the transfer of flammable liquids such as organic solvents and chemical agents.

**SHC-100** SHC-100 (For Solvents and Biodiesel) A safe and secure drum pump certified under the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). This is an explosion-proof pressure-resistant structure that meets the explosion-proof grade specified by the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). **Benefits** ● Discharges one drum in just 3.5 minutes and can operate continuously for 24 hours. ● Compatible with various solvents and chemicals. ● Comes with a manual gun nozzle for easy one-handed dispensing. **Features** ● Designed specifically for JIS standard 200L closed drums. ● Equipped with a pressure-resistant explosion-proof structure motor for safety. **Explosion-Proof Motor** When installing a gear motor in areas with flammable gases or other explosive atmospheres that pose a risk of ignition and explosion, the motor must comply with explosion-proof testing as stipulated by the Safety and Health Act. This testing system is conducted by designated testing organizations (the Japan Industrial Safety and Health Association) for each type of electrical equipment as specified by the Minister of Health, Labour and Welfare. Explosion-proof motors must be selected based on the type of explosive atmosphere and the degree of hazard.

• others

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

"EV Series" EV-100Ad (for AdBlue / 100V) EV-12Ad (for AdBlue / 12V) EV-24Ad (for AdBlue / 24V) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suitable for Japan in response to customer feedback. ◎ Three types available according to application ◎ Customizable "Benefits" ● Comes with a hose nipple, just insert the hose (recommended hose inner diameter φ19) ● Made of resin, lightweight and compact "Features" ● Power supply: AC100V, DC12V, DC24V ● Diaphragm pump type ● Built-in thermal protector for safety

• others

For dispensing liquids from pails and one-gallon cans. A convenient faucet that allows for easy pouring like a server.

"Pail Cock Series" BV-40 (for oil / can discharge outlet outer diameter Φ40.8) BV-50 (for oil / can discharge outlet outer diameter Φ48.8) ◎ Easy to install and operate Simply screw it into a one-gallon can or pail can for connection. Operation is as easy as twisting the upper lever. *If the spout is made of resin, it will be a custom order, so please inquire. It cannot be used with standard products. 《Advantages》 ● Easy installation, can be stored with the cock attached ● Viscosity and material can be selected according to the liquid used 《Features》 ● Designed specifically for pail cans and one-gallon cans with spout outer diameters (Φ40.8, Φ48.8) ● Mechanism for dispensing liquid by placing the can horizontally and using its own weight ● Easy installation ● Two sizes of installation openings are available (Φ40.8, Φ48.8) *For pail cans and one-gallon cans, the size of the can discharge outlet refers to the outer size, not the inner size of the outlet.

• pump

【For solvents / Liquid only】Collect low-viscosity liquid into a closed pail.

◎Simple structure with no risk of failure ◎Easy to operate ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation possible ●Less prone to breakage compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

• pump

[For kerosene and light oil / Liquid only] Collect low-viscosity liquid into a closed pail.

◎Simple structure that is trouble-free ◎Easy to operate ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation possible ●Less prone to breakage compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

• pump

【For oil / liquid only】Collect low-viscosity liquid into a closed pail can.

◎Simple structure with no failures ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation possible ●Less likely to break compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

• pump

[For kerosene and light oil / Liquid only] Collect low-viscosity liquids into open pails.

◎Simple structure, no breakdowns ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Can suction one pail in about 15 seconds ●Continuous operation possible ●Less prone to breaking compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• pump

【For oil / liquid only】Collect low-viscosity liquid into an open drum.

◎Simple structure, no worries about breakdowns ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available pail ●Can suction one pail in about 15 seconds ●Continuous operation possible ●Less prone to breaking compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1 and plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• pump

For dispensing AdBlue in locations without power, for replenishment from the back-in-box.

"Ad-3 Series" Ad-3 (for AdBlue / battery-operated) Ad-3-100V (for AdBlue / electric) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suitable for Japan in response to customer feedback. "Benefits" ● Lightweight and compact ● Can be refilled in places without power or air ● No need to lift the box ● Can dispense approximately 26 boxes with 2 AA batteries "Features" ● For back-in-box use * Back-in-box sold separately ● Two types: battery-operated and 100V ● Comes with a 2.5m hose (hose extension is not possible) ● Includes a handheld nozzle * Auto-stop function is not included.

• pump

Check the remaining amount in just 1 second by pressing a button! Liquid level gauge for drums and pails!

**ZKT Series** ZKT-D-OL (for oil / for drums) ZKT-D-W (for water / for drums) ZKT-P-OL (for oil / for pails) ZKT-P-W (for water / for pails) **Advantages** ● Liquid level detection in just 1 second ● The liquid contact pipe is made of stainless steel, making it durable ● Lightweight and easy to carry **Features** ● Capacitive type ● Can use either AA batteries or 100V power supply *Note: If using dry batteries, 2 AA batteries are required* ● Liquid level display with 10 levels of LED ● Available for drums and pails, for oil and water *Note: Not suitable for flammable liquids* *Note: In addition to water and oil, can accommodate various liquids (custom specifications)*

• pump

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue and water.

**Merits** ● Easy operation at your fingertips ● Cost reduction through liquid management **Features** ● Dispenses when squeezed, stops when released ● Includes lever hook ● Equipped with flow meter ● Not usable with free fall or siphon use

• pump

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue and water.

**Merits** - Easy operation at your fingertips - Cost reduction through liquid management **Features** - Dispenses when gripped, stops when released - Includes lever hook - Equipped with a flow meter - Not usable with free fall or siphon methods

• pump

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue and water.

**Merits** - Easy operation at hand - Cost reduction through liquid management **Features** - Dispenses when gripped, stops when released - Includes lever hook - Equipped with a flow meter - Not usable with free fall or siphon methods

• pump

It is convenient to attach it to the end of a hose when combined with electric pumps or air pumps for oil, light oil, and kerosene.

《Merits》 ● Easy operation at your fingertips ● Usable even with self-weight drop * Please be careful with the operating pressure. ● Lightweight aluminum construction 《Features》 ● Squeeze to dispense, release to stop ● Lever hook included

• pump

AdBlue for purifying diesel exhaust gases! When you want to quickly portion out AdBlue from a resin drum.

◎AdBlue license obtained in 2011 AdBlue: Trademarked product ◎Flow meter specifications 《Advantages》 ● Lightweight and compact ● Flow meter can also be installed ● Continuous operation possible 《Features》 ● PSE (Electrical Appliance and Material Safety Law) compliant product ● Dedicated to JIS standard 200L closed drum (large cap G2) * Optional specifications available with Kodama resin or Sanko adapters ● Air motor ● Maximum discharge head 3m, maximum discharge volume 25L/min ● Standard equipped with circuit breaker (automatic stop for heat and overcurrent) * Reset by pressing the breaker. 《What is AdBlue?》 High-quality urea solution AdBlue is a urea aqueous solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides must supply AdBlue in the same way as fuel. By injecting urea solution into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• pump

Hand-cranked pump that performs exceptionally well even in emergencies! Lightweight with a resin body, ideal for dispensing organic solvents.

**HRP Series** HRP-25Z (For solvents) HRP-25ZM (For solvents / with hose and sealed adapter) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Lightweight body made of resin ◎ Suction pipe can be cut **Benefits** ● Simple operation by just turning the handle ● Lightweight and easy to replace ● No power supply needed ● Can dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.1) ● Safe for highly volatile liquids with sealed adapter (HRP-25ZM) ● Great for emergencies and disasters ● Compatible with weak acids and weak alkalis due to resin material (HRP-25Z series) **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Equipped with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause them to tear.*

• pump

Hand-cranked pump that performs exceptionally well even in emergencies! Lightweight body made of resin, suitable for dispensing organic solvents.

**HRP Series** HRP-25III (for solvents) HRP-25IIIH (for solvents / with hose) HRP-25IIIHM (for solvents / with hose, sealed adapter, and grounding wire) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Lightweight body made of resin ◎ Suction pipe can be cut **Benefits** ● Simple operation by just turning the handle ● Lightweight and easy to replace ● No power supply needed ● Can also dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with a specific gravity (below 1.1) ● Safe for highly volatile liquids with a sealed adapter (HRP-25III HM) ● Great for emergencies and disasters **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and bending them excessively may cause tearing.*

• pump

Hand-cranked pump that performs exceptionally well even in emergencies! Made of all stainless steel, perfect for dispensing organic solvents.

**HRD Series** HRD-25SUS (for solvents) HRD-25SUSH (for solvents / with hose) HRD-25SUSHM (for solvents / with hose, sealed adapter, and grounding wire) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Continuous pumping is possible ◎ Suction pipe can be cut **Benefits** ● Simple operation by just turning the handle ● No power supply needed ● Can also dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.5) ● High volatility liquids can be safely handled with a sealed adapter (HRD-25SUSHM) ● Very useful in emergencies and disasters **Features** ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Equipped with a 40-mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause tearing.*

• pump

Large-capacity recovery of high-viscosity liquids; can be disassembled for cleaning. For suction use only.

"APDQS Series - Inhalation Only" APDQS-32 (for oil) APDQS-25 (32) SUS (for solvents, acids, and alkalis) APDQS-1 (1.5)s (Sanitary model / Tri-clamp fitting specification) APDQS-25PP (for acids and alkalis) ◎ Explosion-proof design that does not use electricity ◎ Suitable for high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate "Benefits" ● Safely sucks volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available in sanitary tri-clamp fitting specifications ● Sanitary type has a proven track record in food use (APDQS-1s, 1.5s) * Not applicable under the Food Sanitation Act "Features" ● Dedicated to JIS standard 200L closed drums (large plug G2) ● Inhalation only with a sealed negative pressure system for drums, no discharge ● Separation of the pressure reduction section (G3/4) and the inhalation section (G2)

• pump

[Sanitary product / H-elbow fitting specification] For large-capacity transfer of high-viscosity liquids; disassembly and cleaning possible.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate 《Benefits》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available in sanitary-grade ferrule fittings ● Sanitary type has a proven track record for food use (APDQS-1s, 1.5s) * Not applicable under the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Closed drum negative pressure type, suction only, no discharge ● Separate pressure reduction section (G3/4) and suction section (G2) 《How the Air Vacuum Pump Works》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can safely and efficiently collect without using electricity through an ejector mechanism. The collected drum can be handed directly to a waste disposal contractor. * Please contact the contractor for disposal methods.

• pump

[For solvents, acids, and alkalis] A separate type air vacuum pump for transferring high-viscosity liquids in large volumes, capable of disassembly and cleaning!

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate 《Benefits》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available in sanitary specifications with hygienic fittings ● Sanitary type has a proven track record for food use (APDQS-1s, 1.5s) * Not applicable under the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Closed drum negative pressure type, suction only, no discharge ● Separation of the pressure reduction section (G3/4) and the suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can safely and efficiently recover without using electricity through an ejector mechanism. The collected drum can be handed directly to a waste disposal contractor. * Please contact the contractor for disposal methods.

• pump

For oil: Large capacity transfer of high-viscosity liquids; disassembly and cleaning possible.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate 《Benefits》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available in sanitary specifications with hygienic fittings ● Sanitary type has a proven track record for food use (APDQS-1s, 1.5s) *Does not comply with the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Closed drum negative pressure type, suction only, no discharge ● Separation of the pressure reduction part (G3/4) and the suction part (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can efficiently and safely recover without using electricity through an ejector mechanism. The collected drum can be handed over directly to a waste disposal company. *Please contact the disposal company for disposal methods.

• pump

[For Solvents / Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed with a focus on reasonable pricing.

**CHD Series** CHD-20APP (For Solvents) CHD-20APPV (For Solvents / with Ball Valve) CHD-20APPN (For Solvents / with Gun Nozzle) **Benefits** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Complies with PSE (Product Safety of Electrical Appliances and Materials) for peace of mind and safety ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume and no pulsation ● Discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement.

• pump

Clean the factory effortlessly! Introducing the air-operated drum vacuum cleaner in a comic, along with the air-operated tank cleaning filtration cleaner for cleaning around machine tools.

You can download the manga by scrolling down and clicking on the first "catalog." Aqua System sells a variety of air-powered products for factories. We introduce an air-powered vacuum cleaner that can be used immediately by simply placing it on a 20L drum and connecting the air hose, along with its benefits and examples, in an easy-to-understand manga format. It is a wet and dry type, so it can collect both debris and liquids. We also handle tank cleaning filtration cleaners that can filter coolant tanks for machine tools such as NC lathes and machining centers. You can use the tank cleaning filtration cleaner for filtration and collect floating oil with the vacuum cleaner, among other combinations. Why not use our tank cleaning filtration cleaner and vacuum cleaner for a thorough year-end cleaning of machine tools, their surroundings, and the entire factory? Since it is air-driven, it can also be used in areas where open flames are prohibited. ■ Lower price, safer, and longer lifespan than electric vacuum cleaners ■ Collection of cutting fluid from machine tools and collection of cutting chips around machines ■ Collection of waste liquid mixed with chips ■ Collection of sludge from wastewater treatment tanks ■ Can also be used for drum can collection by setting a top plate!

• Building Cleaning Equipment

Convenient when attached to the end of a hose in combination with an electric pump or air pump! The gun nozzle automatically stops when full.

◎Stop without using electricity or batteries This is a nozzle that automatically stops when full, using a liquid level sensor without the need for electricity or batteries. Since the auto-stop functions at a constant flow rate and pressure, it cannot be used with gravity drop. *Please pay attention to the usage pressure and flow rate range. *The flow meter uses batteries. 《Advantages》 ● Easy operation at your fingertips ● Automatically stops when full ● Cost reduction through liquid management 《Features》 ● Dispenses when squeezed, stops when released ● Includes a lever hook ● Equipped with a flow meter ● Not usable with gravity drop or siphon methods

• pump

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"Yatsunami Wing Pump Series" - CAC-CAC 15A to 50A (All bronze / for water) - CAC-CAC JIS5K 15A to 50A (All bronze / for water) - CAC-CAC JIS10K 15A to 50A (All bronze / for water) ◎ For emergency water supply pumps ◎ Liquid transfer 《Benefits》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Two types: screw-type flange and JIS standard round flange * No flange for JIS 5K type and JIS 10K type ● Additionally available in bronze (for oil) and gasoline specifications

• pump

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"Yatsunami Wing Pump Series" - FC-CAC 15A to 50A (Brass for key parts / for oil) - FC-CAC JIS5K 15A to 50A (Brass for key parts / for oil) - FC-CAC JIS10K 15A to 50A (Brass for key parts / for oil) ◎ For emergency water supply pumps ◎ Liquid transfer "Benefits" ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply "Features" ● Two types: screw-type flange and JIS standard round flange * No flange for JIS 5K type and JIS 10K type ● Separate models available for brass (for water) and gasoline specifications

• pump

Ideal for transporting drums. Easy to move with large wheels!

Drum Can Transport Carry Trolley (TORRY-D) Ideal for transporting drum cans. Equipped with large vehicle wheels for easy movement of drum cans, and features a fall prevention lock for safe transportation. <Main Workplaces Where It Excels> Recommended as a pump for work sites and contractors using AdBlue. <Acquired AdBlue License in 2011> Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction and agricultural machinery, and as customer needs change, we are currently developing and importing AdBlue products suited to Japan. <What is AdBlue?> High-quality urea water AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt urea SCR systems to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of diesel vehicle clean performance.

• Trolley

A heater that warms up drums and similar containers to reduce the viscosity of liquids.

"HTJ Series" HTJ-A-P (for pails and one-gallon cans) HTJ-B-50D (for 50L drums) HTJ-C-100D (for 100L drums) HTJ-C-200D (for 200L drums) HTJ-HHD (for 200L drums) HTJ-HP2D (for 200L drums) HTJ-IBC1-40 (for IBC containers) HTJ-IBC2-90 (for IBC containers) ◎ Selectable by container type "Benefits" ● Covers the entire container, making it less likely to cool down ● Foldable, requiring less storage space "Features" ● Compatible with 6 types of containers, temperature adjustment via dial ● Three types of outer covering material, simply wrap around the container and secure with a band <Common Specifications> Power Supply (V): 100 <Usable Liquids> - Oil - Water-based paint - Triethanolamine *Not suitable for flammable liquids. *The product shown in the video is from the time of filming. The design and specifications may differ at the current time or during the sales period. Thank you for your understanding.

• pump

The use of materials such as SUS, PTFE, and FFKM in the liquid contact parts has increased the range of compatible liquids compared to our conventional product (CHD-20SUS)! Suitable for the transfer of solvents in chemical plants.

**CHD1 Series** CHD1-20SUS (for solvents) CHD1-20SUSV (for solvents / with ball valve) CHD1-20SUSN (for solvents / with gun nozzle) ● Continuous operation possible ● Lightweight and compact body ● Inexpensive **Features** ● Compliant with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 22L/min ● For discharge only **Applications** Not only used in metal plating factories and semiconductor manufacturing, but also in chemical plants, pharmaceutical warehouses, and more. Additionally, it is used in water treatment, pharmaceutical processes, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flame areas, please use the air-operated model (CHD1-20ASUSN). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Ethyl acetate ■ Butyl acetate ■ Hydrogen peroxide ■ Sodium hydroxide ■ Nitric acid (30% concentration)

• pump

Portable electric hand pump. High-speed transfer of kerosene and diesel.

"EVP Series" EVP56-100 (for kerosene and light oil / pump only) EVPD56-100 (for kerosene and light oil / for drum) EVPD-56ATN (for kerosene and light oil / for drum / with auto-stop gun) EVPD-56K24 (for kerosene and light oil / for drum / with flow meter) EVPD-56K24ATN (for kerosene and light oil / for drum / with auto-stop gun and flow meter) EVPH56-100 (for kerosene and light oil / both ends with hose) EVPH-56ATN (for kerosene and light oil / both ends with hose / with auto-stop gun) EVPH-56K24 (for kerosene and light oil / both ends with hose / with flow meter) EVPH-56K24ATN (for kerosene and light oil / both ends with hose / with auto-stop gun and flow meter) ◎ Flow meter and auto-stop gun specifications ◎ Customizable Benefits: ● Maximum discharge of 46L per minute ● Various applications available with flow meter and auto-stop gun options ● Continuous operation possible Features: ● Dedicated to JIS standard 200L closed drum (large cap G2) ● Single-phase AC 100V (200V version also available) ● Built-in relief valve and 100μm filter ● Available in drum and hose connection types ● Spiral centrifugal pump

• pump

Portable electric hand pump! Fast transfer of kerosene and diesel.

"EVP Series" EVPD56-100 (for kerosene and light oil / for drum cans) EVPD-56ATN (for kerosene and light oil / for drum cans / with auto-stop gun) EVPD-56K24 (for kerosene and light oil / for drum cans / with flow meter) EVPD-56K24ATN (for kerosene and light oil / for drum cans / with auto-stop gun and flow meter) ◎ Flow meter and auto-stop gun specifications ◎ Customizable "Benefits" ● Maximum discharge rate of 46L per minute ● Various applications available with flow meter and auto-stop gun options ● Continuous operation possible "Features" ● Dedicated to JIS standard 200L closed drum cans (large cap G2) ● Single-phase AC 100V (200V version also available) ● Built-in relief valve and 100μm filter ● Available in hose connection type for drum cans ● Spiral centrifugal pump "Mechanism of Vane Pump" The center of the pump body is slightly offset from the center of the vane wheel, creating a structure where the vanes operate due to centrifugal force. The operating principle involves reducing the volume with the vanes to increase pressure.

• pump

Ideal for liquid management - a mechanical flow meter that measures discharge volume.

"Flow Meter Series" MK33-25D (for kerosene and light oil) MK33-25OL (for oil) ◎ Mechanical simple battery-operated flow meter It has a large display that is easy to see from a distance. It is inexpensive and allows for liquid management of kerosene and light oil. *Not suitable for gasoline. 《Advantages》 ● Large and easy-to-read simple disk-type flow meter with mechanical digital display ● No risk of ignition or explosion due to its mechanical design ● Free movement in four directions 《Features》 ● Calibration is possible ● Easy reset by turning the lever

• pump

[For Oil] JIS Standard Drum Liquid Level Gauge! For managing residual liquid in drums.

**Merits** ● Lightweight and affordable ● Capable of managing liquids inside a drum ● No electricity or batteries required ● Usable liquids include kerosene, diesel, oil, and water *Note: Solvents and chemicals are not allowed* **Features** ● Designed specifically for JIS standard 200L closed drums *Can be attached to both the large (G2) and small (G3/4) openings of the drum* ● Accuracy error is approximately ±5cm ● Display method is percentage display (indicating the remaining amount from the bottom of the drum) *When the remaining liquid reaches 30%, it will display yellow, and when it reaches 10%, it will display red* *If there is more than 65% remaining, the float cannot be removed* ● This product is for indoor use only *Do not use outdoors*

• pump

A convenient stand with a tray that allows for the upright storage of a drum pump.

**Merits** - The pump is protected from damage, making it easy to store and retrieve. - The suction pipe opening remains clean. - It takes up little space and is easy to place. **Features** - Comes with a tray to prevent liquid drips from residual liquid in the pump. - Vertical storage with adjustable height. - Includes a hose hook to keep the hose off the floor. - Size (length × width × height): 520 × 410 × 996 (mm) - Material: SUS

• pump

Drum pump nozzle storage available for drum cans.

**Merits** ● No trouble finding a place for the gun nozzle ● No scratches on the nozzle ● No dirt on the drum or floor **Features** ● Easy installation with a hex wrench ● Compatible with manual nozzles to auto-stop nozzles *Note: Thick gun nozzles like ATPS-10 are not compatible* ● Simply hook it on the edge of the drum's top ● Size (Length/Width/Height) 73.2×51×70 (mm) ● Material: SUS

• pump

Ideal for managing AdBlue liquid - Digital flow meter for measuring discharge volume.

◎ Simple battery-operated flow meter with turbine digital system It is a compact flow meter that is easy to combine with a gun nozzle. It is inexpensive and allows for the management of AdBlue liquid. *Not waterproof. Do not immerse the meter in liquid. ◎ Display panel orientation can be changed The display panel can be attached in four directions using just one screwdriver. 《Advantages》 ● Compact size makes it easy to combine with a gun nozzle ● Allows for immediate confirmation of discharge volume 《Features》 ● Calibration with a repeatability of 0.2% ● Digital display screen (uses two AA batteries) ● By attaching a socket, one side can be converted to a female thread *Please be careful of liquid leakage during connection, as the connection port has parallel threads.

• pump

[For kerosene and light oil] Ideal for liquid management, digital flow meter for measuring discharge volume.

◎ Simple battery-operated flow meter with turbine digital method It is compact, making it easy to combine with a gun nozzle. It is inexpensive and can manage liquids such as kerosene and light oil. *Not suitable for gasoline. ◎ Display panel orientation can be changed The display panel can be attached in four directions with just one screwdriver. 《Advantages》 ● Compact size makes it easy to combine with a gun nozzle ● Allows for immediate confirmation of discharge volume 《Features》 ● Calibration with a repeatability of 0.2% ● Digital display screen (uses two AA batteries) ● By attaching a socket, one side can be converted to a female thread *Please be cautious of liquid leakage during connection as the connection port has parallel threads.

• pump

Convenient when attached to the end of a hose in combination with an electric pump or air pump! The gun nozzle automatically stops when full.

◎Stop without using electricity or batteries This nozzle has a mechanism that automatically stops when full, using liquid level detection without the need for electricity or batteries. Auto-stop functions with a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the usage pressure and flow rate range. *The flow meter uses batteries. 《Advantages》 ● Easy operation at your fingertips ● Automatically stops when full ● Cost reduction through liquid management 《Features》 ● Dispenses when squeezed, stops when released ● Includes lever hook ● Equipped with a flow meter ● Not usable with gravity drop or siphon methods

• pump

Convenient when attached to the end of a hose in combination with an electric pump or air pump! The gun nozzle automatically stops when full.

◎Stop without using electricity or batteries This is a nozzle that automatically stops when full, using a liquid level sensor without the need for electricity or batteries. The auto-stop function operates at a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the usage pressure and flow rate range.* *The flow meter uses batteries.* 《Advantages》 ● Easy operation at your fingertips ● Automatically stops when full ● Cost reduction through liquid management 《Features》 ● Dispenses when squeezed, stops when released ● Includes lever hook ● Equipped with a flow meter ● Not usable with gravity drop or siphon methods

• pump

It's convenient to attach it to the end of a hose when combined with an electric pump or air pump! Manage costs with oil management; it can measure, quantify, and stop with a preset quantity.

《Merits》 ● Easy operation at your fingertips ● Stops at the specified amount ● Cost reduction through liquid management 《Features》 ● Dispenses when gripped, stops when released ● Equipped with a lever hook ● Includes a flow meter ● Not usable with free fall or siphon methods ● The nozzle at the tip is of the automatic nozzle type ● The battery unit has a completely sealed separation structure for safety

• pump

It's convenient to attach it to the end of a hose when combined with an electric pump or air pump! The auto-stop gun nozzle automatically stops when full.

"Measurement Auto Stop Gun Nozzle Series" ATNH-20 (25) K24 (for diesel, kerosene, gasoline) ATNH-FAK24 (for diesel, kerosene / exclusive for FA-100) ATNH-FRK24 (for diesel, kerosene / exclusive for FR-200) *Cannot be used for oil or biodiesel. ◎ Stops without using electricity or batteries This nozzle automatically stops when full, using a liquid level sensor without electricity or batteries. The auto-stop functions at a constant flow rate and pressure, so it cannot be used with free fall. *Please pay attention to the operating pressure and flow rate range. *The flow meter uses batteries. 《Benefits》 ● Easy operation at your fingertips ● Automatically stops when full ● Cost reduction through liquid management 《Features》 ● Dispenses when gripped, stops when released ● Includes lever hook ● Equipped with a flow meter ● Not usable with free fall or siphon methods

• pump

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for oil use.

**Merits** ● Easy operation at hand ● Cost reduction through liquid management **Features** ● Dispenses when gripped, stops when released ● Equipped with a lever hook ● Includes a flow meter ● Not usable with free fall or siphon use

• pump

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump.

"Measuring Manual Gun Nozzle Series" GN-AL3025K24 (for light oil and kerosene) GN-AL3025K24FA (for light oil and kerosene / dedicated to FA-100) GN-AL3025K24FR (for light oil and kerosene / dedicated to FR-200) "Benefits" ● Easy operation at your fingertips ● Cost reduction through liquid management "Features" ● Dispenses when squeezed, stops when released ● Lever hook included ● Flow meter included ● Not suitable for use with natural drop or siphon methods

• pump

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for light oil and kerosene.

**Merits** ● Easy operation at your fingertips ● Cost reduction through liquid management **Features** ● Dispenses when squeezed, stops when released ● Equipped with a lever hook ● Includes a flow meter ● Not usable with free fall or siphon methods

• pump

The 【ATNP-PP25Ad/ATNP-SUS20-Ad】 is convenient when attached to the end of a hose in combination with electric pumps or air pumps!

◎Stop without using electricity or batteries This is a nozzle that automatically stops when full, using a liquid level sensor without the need for electricity or batteries. Since the auto-stop functions at a constant flow rate and pressure, it cannot be used with gravity drop. *Please pay attention to the operating pressure and flow rate range. 《Advantages》 ● Easy operation at hand ● Automatically stops when full 《Features》 ● Dispenses when gripped, stops when released ● Includes a lever hook ● Not usable with natural drop or siphon methods

• pump

It's convenient to attach it to the end of a hose when combined with an electric pump or air pump for solvents! The gun nozzle automatically stops when full.

◎Stop without using electricity or batteries This is a nozzle that automatically stops when full, using a liquid level sensor without the need for electricity or batteries. Since the auto-stop function operates at a constant flow rate and pressure, it cannot be used with gravity drop. *Please pay attention to the operating pressure and flow rate range. 《Benefits》 ● Easy operation at your fingertips ● Automatically stops when full 《Features》 ● Dispenses when gripped, stops when released ● Includes a lever hook ● Not usable with natural drop or siphon methods

• pump

It's convenient to attach it to the end of a hose when combined with an electric pump or air pump! The gun nozzle automatically stops when it's full.

"Auto Stop Gun Nozzle Series" ATNH-20 (25) (for light oil and kerosene) ATNH-FA (for light oil and kerosene / dedicated to FA-100) *Cannot be used with oil, gasoline, or biodiesel. ◎ Stops without using electricity or batteries This nozzle automatically stops when full, using a liquid level sensor without electricity or batteries. Auto stop functions at a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the usage pressure and flow rate range. 《Benefits》 ● Easy operation at hand ● Automatically stops when full 《Features》 ● Dispenses when gripped, stops when released ● Includes lever hook ● Not usable with gravity drop or siphon methods

• pump

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump for solvents.

《Merits》 ● Easy operation at your fingertips ● Usable even with self-weight drop * Please be mindful of the operating pressure. 《Features》 ● Dispenses when gripped, stops when released ● Includes lever hook

• pump

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for AdBlue.

"Merits" ● Easy operation at hand ● Usable even with self-weight drop * Please be careful of the operating pressure. "Features" ● Dispenses when gripped, stops when released ● Includes lever hook

• pump

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump for water use.

"Merits" ● Easy operation at hand ● Usable even with self-weight drop * Please pay attention to the operating pressure. "Features" ● Dispenses when gripped, stops when released ● Includes lever hook

• pump

[For Oil] Manual pump that works great even in emergencies! High discharge rate of 1L per rotation, suitable for transferring low-viscosity liquids.

◎Hand-cranked pump that requires no power source ◎Can be used without sealing the drum ◎Widely usable from household drums to factories ◎Inlet pipe can be cut 《Benefits》 ●Easy operation with just a turn of the handle ●Discharges one drum in about 5 minutes ●No power supply needed ●Can be used with A heavy oil and low viscosity oils (below 500 cP) ●Highly effective in emergencies and disasters 《Features》 ●Designed specifically for JIS standard 200L closed drums (large plug G2) ●Continuous pumping is possible ●Securely fixed to the drum with an adapter ●Includes a 60 mesh strainer *The material of the hose during replacement will be PVC (transparent). 《Mechanism of the Hand Rotary Pump》 This pump transfers liquid using internal vanes. It is operated by hand rotation to discharge, making it easy to use.

• pump

Convenient to attach to the end of a hose when combined with electric pumps or air-operated pumps for solvents, AdBlue, and water.

《Merits》 ● Easy operation at your fingertips ● Usable even with self-weight drop * Please be careful of the operating pressure. 《Features》 ● Squeeze to dispense, release to stop ● Equipped with a lever hook

• pump

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump for solvents.

"Merits" ● Easy operation at hand ● Usable even with self-weight drop * Please pay attention to the operating pressure. "Features" ● Dispenses when gripped, stops when released ● Includes lever hook

• pump

It is convenient to attach it to the end of a hose when combined with electric pumps or air pumps for oil, diesel, kerosene, and gasoline.

《Merits》 ● Easy operation right at your fingertips ● Usable even with self-weight drop * Please be mindful of the operating pressure. 《Features》 ● Squeeze to dispense, release to stop ● Equipped with a lever hook

• pump

Easily dispense AdBlue from an IBC container with a supply tank located at a high position! There are also types that automatically stop when full and allow you to check the amount used.

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product 《Benefits》 ● Easy to portion with one hand thanks to the manual gun nozzle 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● For IBC containers ● Power supply: AC100V ● Lightweight resin manual gun nozzle with nozzle storage 《What is AdBlue?》 High-quality urea water AdBlue is a urea aqueous solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles equipped with a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• pump

Easily dispense AdBlue from an IBC container with a supply tank located at a high position! There are also types that automatically stop when full and allow for usage amount confirmation.

◎Acquired AdBlue license in 2011 AdBlue: Trademarked product 《Benefits》 ● Flow rate can be checked on-site with a flow meter ● Automatic stop when small containers are full 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● For IBC containers ● Power supply is AC100V ● Lightweight resin flow meter integrated nozzle with nozzle storage 《What is AdBlue?》 High-quality urea water AdBlue is a urea aqueous solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• pump

Easily dispense AdBlue from IBC containers with a supply tank located at a high position! There are also types that automatically stop when full and allow you to check the usage amount.

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product 《Benefits》 ● Flow rate can be checked on-site with a flow meter ● Automatic stop when the small container is full 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● For IBC containers ● Power supply is AC100V ● Lightweight resin flow meter integrated nozzle with nozzle storage 《What is AdBlue?》 High-quality urea water AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• pump

AdBlue for purifying diesel exhaust gases! Dispensing AdBlue in places without power.

◎AdBlue license obtained in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed ● Can be refilled in places without power or air ● Can fill approximately 6 drums after charging 《Features》 ● For IBC containers ● Lithium-ion charging (charging time: 2 hours) ● Maximum discharge rate: HIGH: 30L/min ● Continuous usage time: HIGH: 20 minutes, LOW: 40 minutes 《What is AdBlue?》 High-quality urea water AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied just like fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• pump

AdBlue for purifying diesel exhaust gases! When you want to quickly portion out AdBlue contained in an IBC container.

◎AdBlue license obtained in 2011 AdBlue: Trademarked product ◎Flow meter specifications 《Advantages》 ● Lightweight and compact ● Flow meter can also be installed ● Continuous operation possible 《Features》 ● PSE (Electrical Appliance and Material Safety Law) compliant ● For IBC containers ● Air motor ● Maximum discharge head of 3m, maximum discharge rate of 25L/min ● Standard equipped with circuit breaker (automatic shutdown for heat and overcurrent) * Can be reset by pressing the breaker 《What is AdBlue?》 High-quality urea solution AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied just like fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• pump

Purifying diesel exhaust gases with AdBlue! When you want to quickly portion out AdBlue contained in an IBC container.

◎Acquired AdBlue license in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● For IBC containers ● Power supply is AC100V ● Maximum discharge head of 5m, maximum discharge volume of 30L/min ● Standard equipped with circuit breaker (automatic stop for heat and overcurrent) * Can be reset by pressing the breaker 《What is AdBlue?》 High-quality urea solution AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improved clean performance of diesel vehicles.

• pump

AdBlue for purifying diesel exhaust gases! Dispensing AdBlue in places without power.

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Lightweight and compact ● Compatible with auto-stop guns and flow meters ● Can be refilled in places without power or air ● Can dispense approximately 6 drums after charging 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● Dedicated to JIS standard 200L closed drums (large cap G2) *Optional adapters made of Kodama resin or Sanko are also available ● Lithium-ion charging (charging time: 2 hours) 《What is AdBlue?》 High-quality urea water AdBlue is a urea aqueous solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt urea SCR systems to reduce nitrogen oxides require AdBlue to be supplied just like fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• pump

Purifying diesel exhaust gases with AdBlue! When you want to quickly portion out AdBlue from a resin drum.

◎Acquired AdBlue license in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● Dedicated to JIS standard 200L closed drum (large cap G2) * Optional specifications with Kodama resin or Sanko adapters are also available ● Power supply is AC100V ● Maximum discharge head of 5m, maximum discharge rate of 30L/min ● Standard equipped with circuit breaker (automatic stop for heat and overcurrent) * It can be reset by pressing the breaker. 《What is AdBlue?》 High-quality urea water AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• pump

[Oil, kerosene, light oil, and water / screw connection specification] For transferring fuel or water in places without power or during emergencies! Large capacity type 2,000cc/stroke.

◎Emergency water supply pump ◎Easy to operate ◎Standing action type 《Benefits》 ● Performance of 4m suction (no priming required) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Allows for work while standing ● Large capacity of 2,000cc per stroke 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities like factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency equipment for ships and boats ● Rainwater utilization system for households ● Used cooking oil collection 《As an emergency pump》 ● Can suction up to the 2nd or 3rd floor of a building ● Usable for refueling emergency power supply on building rooftops ● For transferring toilet water or water tanks in emergencies

• pump

[Oil, kerosene, light oil, water / screw connection specification] For transferring fuel or water in places without power or during emergencies! Emergency water supply pump kit.

◎Emergency water supply pump ◎Easy to operate ◎Standing action type 《Benefits》 ● Performance of 5m suction (no priming required) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Work can be done while standing ● Hose attachment and detachment is easy with lever coupling 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency equipment for ships and boats ● Rainwater utilization system for households ● Waste cooking oil collection 《Included in the set》 ● Diaphragm pump: ST-HDOS-32 (40) ALB: 1 unit ● Lever couplings: 2 pieces (32・40) ● Strainer: 1 piece ● Discharge hose: 1 piece, 5m with coupler (Φ32・Φ38) ● Suction hose: 1 piece, 3m with coupler (Φ32・Φ38) ● Handle: 1 piece

• pump

【For oil, kerosene, diesel, and water / Screw connection specification】 Ideal for transferring fuel or water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

◎Emergency water supply pump ◎Easy to operate ◎Standing action type 《Benefits》 ● Performance of 5m suction (no priming required) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Allows work to be done while standing 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency equipment for ships and boats ● Rainwater utilization system for households ● Collection of used cooking oil 《As an emergency pump》 ● Can suction up to the 2nd or 3rd floor of a building ● Usable for refueling emergency power supplies on building rooftops ● For transferring toilet water or water tanks in emergencies

• pump

【For water and seawater / Hose nipple specification】 For transferring fuel or water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

◎Emergency water supply pump ◎Easy to operate 《Benefits》 ● Performance of 8m suction (no priming required) and 8m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency standby equipment for ships and boats ● Rainwater utilization system for households ● Used cooking oil collection

• pump

[Oil, kerosene, light oil, and water / screw connection specification] For transferring fuel or water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

◎Emergency water supply pump ◎Easy to operate 《Benefits》 ●Performance of 5m suction (no priming required) and 7m discharge ●Can be used in locations without power supply ●Can handle high-viscosity liquids and waste oil 《Features》 ●Made of aluminum ●Handle can be replaced every 90° ●Easy to disassemble and assemble 《Applications》 ●Water supply and drainage pump for emergencies ●Emergency waste liquid pump for facilities such as factories ●Pump for construction and civil engineering work ●Fuel supply pump for various vehicles and machinery ●Maintenance for machinery and various facilities ●Bilge pump and emergency standby equipment for ships and boats ●Rainwater utilization system for households ●Used cooking oil collection

• pump

【All brass / for water】Suction 6m (2.5m when dry) with a performance of 15m lift! Usable in locations without power.

◎Emergency water supply pump ◎Liquid transfer ◎Material of the frame 《Advantages》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Two types: screw-type phase flange and JIS standard round flange ※ No phase flange for JIS 5K type and JIS 10K type ● Separate options available for brass (for oil) and gasoline specifications 《Included in the set》 ● Frame: 1 unit ● Wing pump: available with 1 or 2 units ● Male couplings: 1 each for suction and discharge ※ Hose and female couplings are not included 《Regarding the direction of piping》 The wing pump cannot be used with the piping direction changed. Please install the suction side down and the discharge side up. The valve is designed to close under its own weight, and if installed sideways or upside down, the valve will not close, preventing liquid discharge. 《Difference between Yatsunami and King》 The King has a lower discharge volume compared to the Yatsunami. Additionally, the King does not have a round flange type or a full brass type.

• pump

Easily dispense high-viscosity liquids from pails or drums for oil use.

◎Manual pump that requires no power source ◎Compatible with high-viscosity liquids 《Benefits》 ● No power supply needed ● For high-viscosity liquids (up to 10,000 cP) ● Can dispense oils that become thick in winter ● SUS model compatible with various solvents (P-SX, P-SXT) ● Extremely useful in emergencies and disasters 《Features》 ● For 41mm diameter openings of pails and drums (40mm adapter included as standard) ※ 50mm adapter available as an option ● Continuous pumping is possible ● Operates with an up-and-down piston mechanism that dispenses when pulled up ※ For high-viscosity liquids, please pull the handle up slowly.

• pump

Quickly transfer low-viscosity liquids for oil, kerosene, light oil, and gasoline.

◎Air-driven ◎Compatible with high-viscosity liquids 《Benefits》 ●Efficiently transfers medium-viscosity liquids ●Can be used with flammable liquids and small amounts of foreign matter ●Ideal for horizontal and high-lift transfers 《Features》 ●Continuous operation possible ●Lifting capacity of 20-30m *Please be sure to use an air filter and lubricator.

• pump

Quickly transfer low-viscosity liquids for solvents.

◎Air-driven ◎Two types: plastic and stainless steel 《Advantages》 ● Safely transfers highly flammable liquids ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with plastic cans and one-gallon cans 《Features》 ● Equipped with a ball valve ● Available in stainless steel and plastic types *Please be sure to use an air filter and lubricator.

• pump

Quickly transfer low-viscosity liquids for solvents.

◎Electric 100V ◎Two types: made of resin and stainless steel 《Advantages》 ● Usable anywhere with a 100V power supply ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with plastic cans and one-gallon cans 《Features》 ● Equipped with a ball valve ● Available in two types: stainless steel and resin

• pump

Pulsation-free discharge during carrier movement! Due to high pressure, injection and spraying are also possible.

《APP-C Series》 APP-C-AL (for oil) APP-C-SUS (for solvents) ◎ Compatible with different diameter cans, including pails and drums ◎ Suitable for high-viscosity liquids ◎ Efficient liquid discharge without waste 《Benefits》 ● For high-viscosity liquids (below 5,000 cP) ● Minimal residual liquid, no pulsation ● Can transfer to high places or long distances under high pressure 《Features》 ● Sealed pressurized type, for discharge only ● Entirely pressurizes pails and drums ● Continuous operation possible ● Lifting capacity of 30m ● Usable with air compressors of 1 horsepower (0.75 kW) or more

• pump

Easily dispense high-viscosity liquids from pails or drums for solvent use.

◎Manual pump that requires no power source ◎Compatible with high-viscosity liquids 《Benefits》 ● No power supply needed ● For high-viscosity liquids (up to 10,000 cP) ● Can dispense oils that become thick in winter ● SUS model compatible with various solvents (P-SX, P-SXT) ● Extremely useful in emergencies and disasters 《Features》 ● For 41mm outer diameter of pails and one-gallon cans (40mm adapter included as standard) *Optional 50mm adapter also available ● Continuous pumping is possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism *For high-viscosity liquids, please pull the handle up slowly.

• pump

【For solvents / Liquid only】Collect low-viscosity liquid into open pails.

◎Simple structure, no worries about breakdowns ◎Easy to operate ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available pail ●Can suck up one pail in about 15 seconds ●Continuous operation possible ●Less prone to breaking compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• pump

【For kerosene and light oil / liquid only】 Waste liquid collection from 5 meters below the underground pit.

◎Compatible with high-viscosity liquids due to vacuum pressure type ◎Simple structure with no risk of failure ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a stainless steel can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Recommended for stainless steel cans (APPQO-SK) ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more

• pump

For oil/liquid use: Waste liquid recovery from 5 meters below ground pit.

◎Compatible with high-viscosity liquids due to vacuum pressure type ◎Simple structure with no failures ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a stainless steel can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Liquid-specific (general oils, etc.) ●Recommended for stainless steel cans (APPQO-SK) ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75 kW) or more

• pump

【For solvents / Liquid only】Waste liquid recovery from 5 meters below the underground pit.

◎Compatible with high-viscosity liquids due to vacuum pressure type ◎Simple structure with no risk of failure ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a stainless steel can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas with no fire risk 《Features》 ●Designed exclusively for liquids (general oils, etc.) ●Recommended for stainless steel cans (APPQO-SK) ●Automatic stop when the liquid is full ●Can be used with air compressors of 5 horsepower (3.75 kW) or more

• pump

Transferring high-viscosity liquids simply by moving the handle up and down.

"Straight Series" S-LX (for solvents) S-LXHS (for solvents / with hose) ◎ Hand piston pump that requires no power source ◎ Compatible with high-viscosity liquids ◎ Continuous pumping possible with siphon function "Benefits" ● No power supply needed ● Compatible with high-viscosity liquids (up to 10,000 cP) with specific gravity (below 1.5) ● Can dispense oils that harden in winter (S-L series) ● Very useful in emergencies and disasters "Features" ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Continuous pumping possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism * Please pull the handle slowly for high-viscosity liquids ● Siphon works for low-viscosity liquids ● Discharge volume per stroke is 600 cc "Mechanism of the piston pump" It is a mechanism that discharges simply by attaching it to a drum and moving the upper piston up and down. It discharges when the upper piston is pulled up. The discharge volume per stroke is 600 cc. This pump is suitable for extracting small amounts of liquid from a drum. Its simple structure is characterized by low failure rates.

• pump

Just by moving the handle up and down, you can transfer high-viscosity liquids.

"Straight Series" S-L (for oil) S-LH-1 (for oil / with hose) ◎ Hand piston pump that requires no power source ◎ Compatible with high-viscosity liquids ◎ Continuous pumping possible with siphon function "Benefits" ● No power supply needed ● Compatible with high-viscosity liquids (below 10,000 cP) with a specific gravity of 1.5 or less ● Can portion winter oils that become hard (S-L series) ● Very useful in emergencies and disasters "Features" ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Continuous pumping possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism * Pull the handle slowly for high-viscosity liquids ● Siphon works for low-viscosity liquids ● Discharge volume per stroke is 600 cc "Mechanism of the piston pump" It is a mechanism that discharges simply by attaching it to a drum and moving the upper piston up and down. It discharges when the upper piston is pulled up. The discharge volume per stroke is 600 cc. This pump is suitable for extracting small amounts of liquid from a drum. Its simple structure is characterized by low failure rates.

• pump

[For Oil] Manual pump that works great even in emergencies! For transferring low-viscosity liquids.

◎Hand-cranked pump that requires no power source ◎Can be used without sealing the drum ◎Widely usable from household drums to factories ◎Inlet pipe can be cut 《Advantages》 ●Easy operation by simply turning the handle ●No power supply needed ●Can be used with A heavy oil and low viscosity oil (below 500cP) ●Very useful in emergencies and disasters 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Continuous pumping is possible ●Securely fixed to the drum with an adapter ●No strainer *The material of the hose during replacement will be PVC (transparent). 《Mechanism of the Hand Rotary Pump》 This pump transfers liquid using internal vanes. It is used as a pump that discharges by manual rotation, making it easy to operate.

• pump

Ideal for sites where electricity is not available! Air diaphragm pump with stepless adjustment function.

The "ADO Series (ADO-40/ADO-50)" is a safety air-driven air diaphragm pump suitable for construction sites such as tunnel and underground work where electricity cannot be used. It comes with a stepless adjustment feature (air speed controller) and can also be used for disaster response. Additionally, we offer the electric hybrid diaphragm pumps "EDO-40/50" and the hand diaphragm pumps "HDO Series." 【Features】 ■ Stepless adjustment feature ■ Safety air-driven ■ Safe as it does not use electricity, preventing electric leakage ■ Suitable for water suction work in narrow spaces, small holes, and confined areas ■ Can also be used for disaster response *For more details, please refer to the PDF materials or feel free to contact us.

• pump

High-speed drum vacuum cleaner capable of collecting large volumes, up to 200L.

"APPQO Series" APPQO-HP2 (For Oil / Wet and Dry Use) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options "Benefits" ● Can be used simply by placing it on top of a drum with the lid ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition "Features" ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Specifically for JIS standard 200L open drums ● Automatic stop when liquid is full ● Usable with air compressors of 10 horsepower (7.5 kW) or more ● Recommended air hose size of 3/8 or larger

• Building Cleaning Equipment

Portable electric hand pump! Fast transfer of kerosene and light oil.

**EVP Series** EVPH56-100 (for kerosene and light oil / both ends with hose) EVPH-56ATN (for kerosene and light oil / both ends with hose / with auto-stop gun) EVPH-56K24 (for kerosene and light oil / both ends with hose / with flow meter) EVPH-56K24ATN (for kerosene and light oil / both ends with hose / with auto-stop gun and flow meter) ◎ Flow meter and auto-stop gun specifications ◎ Customizable **Benefits** ● Maximum discharge rate of 46L per minute ● Various applications available with flow meter and auto-stop gun options ● Continuous operation possible **Features** ● Designed specifically for JIS standard 200L closed drums (large plug G2) ● Single-phase AC 100V (200V version also available) ● Built-in relief valve and 100μm filter ● Also available in drum can type with hose connection ● Spiral type centrifugal pump **Mechanism of Vane Pump** The center of the pump body is slightly offset from the center of the vane, creating a structure where the vanes operate due to centrifugal force. It adopts a principle of operation that increases pressure by reducing the volume with the vanes.

• pump

For transferring kerosene and light oil from a drum.

"FA Series" FA-100ATN (for kerosene and light oil / with auto-stop gun) FA-100K24 (for kerosene and light oil / with flow meter) FA-100ATNK24 (for kerosene and light oil / with auto-stop gun and flow meter) ◎ Koshin FA-100 Utilizes an impeller inside the suction pipe, allowing for efficient transfer of liquids from drums. ◎ Flow Meter and Auto-Stop Gun Specifications A lineup with flow meter and auto-stop gun specifications is available for liquid management of kerosene and light oil. 《Benefits》 ● Compatible with FA-100 ● Available with flow meter and auto-stop gun, suitable for various applications 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● 30-minute rated ● Convenient household power AC-100V drum pump ● Equipped with relief valve

• pump

[For kerosene and light oil / Pump only] Easy-to-carry electric handheld pump! High-speed transfer of kerosene and light oil.

"EVP Series" EVP56-100 (for kerosene and light oil / pump only) ◎ Flow meter and auto-stop gun specifications ◎ Customizable "Benefits" ● Maximum discharge rate of 46L per minute ● Available with flow meter and auto-stop gun for various applications ● Continuous operation possible "Features" ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Single-phase AC 100V (200V version also available) ● Built-in relief valve and 100μm filter ● Also available in hose connection type for drums ● Spiral centrifugal pump "Mechanism of Vane Pump" The center of the pump body is slightly offset from the center of the vane, creating a structure where the vanes operate due to centrifugal force. The operating principle involves reducing the volume with the vanes to increase pressure.

• pump

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration).

**CHD Series** CHD-20HP (For Solvents) CHD-20HPV (For Solvents / With Ball Valve) CHD-20HPN (For Solvents / With Gun Nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Complies with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only **Replacing the Motor Head** The head part (motor part) can be easily detached and replaced, allowing for an air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and the pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

• pump

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration)! Electric chemical drum pump.

**CHD Series** CHD-20PP (For solvents) CHD-20PPV (For solvents / with ball valve) CHD-20PPN (For solvents / with gun nozzle) **Benefits** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing for an air motor type to be exchanged for an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid discharge. ● Gun Nozzle (N) Can be operated with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

• pump

Portable electric handheld pump! Suitable for transferring medium viscosity oil to high places.

"EVH Series" EVH-100 (for oil / 100V) EVH-200 (for oil / 200V) EVH-12 (for oil / 12V) EVH-100H (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable "Benefits" ● Capable of handling general oil VG400 and gear oil SAE140 at 15℃ ● High discharge pressure of 0.45MPa allows for use at high places or over long distances ● Lever coupling type allows for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available, making it versatile for various applications ● EVH-100H is optimal for discharging large amounts of oil below 1,000cP "Features" ● Power supply options include AC100V, 200V (single phase) and DC12V ● Rated for 20 minutes *Please be cautious as motor overheating can cause failure ● Maximum lift height of 30m ● Available in drum can and hose connection types

• pump

An electric drum pump that is relatively high viscosity oil for electric types, ideal for transporting to high places.

**EVD Series** EVD-100 (For Oil / 100V) EVD-200 (For Oil / 200V) EVD-12 (For Oil / 12V) EVD-100H (For Oil / 100V) *Not suitable for kerosene, light oil, solvents, etc.* ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable **Benefits** ● Capable of handling general oil VG400 and gear oil SAE140 at 15°C ● High discharge pressure of 0.45MPa allows for use at heights or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EVD-100H is optimal for discharging large amounts of oil below 1,000 cP **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Power supply options include AC100V, 200V (single-phase), and DC12V ● Rated for 20 minutes *Please be careful as the motor may burn out and cause failure* ● Maximum lift height of 30m ● Also available in a drum can and hose connection type

• pump

Portable electric handheld pump! Ideal for transferring high-viscosity oil and for use at high elevations as an electric type.

"EV Series" EV-100 (for oil / 100V) EV-200 (for oil / 200V) EV-12 (for oil / 12V) EV-100H (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable "Benefits" ● Capable of handling general oil VG400 and gear oil SAE140 at 15℃ ● High discharge pressure of 0.45MPa allows for use at heights or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EV-100H is optimal for discharging large amounts of oil below 1,000cP "Features" ● Power supply options: AC100V, 200V (single phase) and DC12V ● Rated for 20 minutes* Please be cautious as motor overheating may cause failure ● Maximum lift height of 30m ● Available in drum-type and hose connection types

• pump

Radial piston type air-operated handy pump that can be used in explosion-proof areas and is easy to carry! For transferring liquids from tanks or drums of kerosene, diesel, etc.

**AMVH Series** AMH1-20SUS (For solvents / Pump only) AMH1D-20SUS (For solvents / For drums) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable **Benefits** ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability **Features** ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Also available in a hose connection type for drums **Mechanism of the Radial Piston Motor** A motor that alternately compresses air into three pistons to make them move. With three pistons built-in, it is characterized by high discharge pressure. It can transfer high-viscosity liquids (up to 2,000 cP) to heights and distances within 15m. **Mechanism of the Vane Pump** The center of the pump body is slightly offset from the center of the rotor, creating a structure where the vanes, driven by centrifugal force, extend outward.

• pump

An air motor-driven vane hand pump that can be used in explosion-proof areas and is easy to carry! For transferring liquids from tanks or drums such as kerosene, diesel, and lubricating oil.

【For Solvents / Pump Unit & Drum Can】 《AMVH Series》 AMVH-20SUS (For Solvents / Pump Unit) AMVHD-20SUS (For Solvents / Drum Can) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum can ◎ Customizable 《Benefits》 ● Capable of transferring medium viscosity liquids (up to 1500 cP) ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability 《Features》 ● Maximum lift height of 5m ● Volute type centrifugal pump ● Also available in hose connection type for drum cans 《Vane Motor Mechanism》 This motor uses compressed air to move the blades like a windmill. It is capable of maintaining a certain rotation speed. It can transfer medium viscosity liquids (up to 1500 cP) within a height and distance of 10m. The center of the pump body is slightly offset from the center of the impeller, creating a structure where the vanes operate due to centrifugal force.

• pump

An air motor-driven vane hand pump that can be used in explosion-proof areas and is easy to carry! For transferring liquids from tanks or drums such as kerosene, diesel, and lubricating oil.

"AMVH Series" AMVH-20FC (For oil, kerosene, and light diesel / Pump only) AMVHD-20FC (For oil, kerosene, and light diesel / For drums) AMVHH-20FC (For oil, kerosene, and light diesel / Hose at both ends) [For oil, kerosene, and light diesel / Pump only / For drums / Hose at both ends] ◎ Explosion-proof specification that does not use electricity ◎ Usable without sealing the drum ◎ Customizable [Benefits] ● Capable of transferring medium viscosity liquids (up to 1500 cP) ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability [Features] ● Dedicated to JIS standard 200L closed drums (large plug G2) ● Maximum lift height of 5m ● Spiral type centrifugal pump ● Also available in a type for drums and hose connection [How the vane motor works] This is a motor that uses compressed air to move the blades like a windmill. It is a motor that can maintain a certain rotation speed. It can transfer medium viscosity liquids (up to 1500 cP) within a height and distance of 10m. The center of the pump body is slightly offset from the center of the impeller, creating a structure where the vanes operate due to centrifugal force.

• pump

Air-operated portable hand pump for solvents, suitable for use in explosive areas and easy to carry.

ACH Series" ACH-20SUS (for solvents / pump only) ACHD-20SUS (for solvents / for drums) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge capacity of 50L/min ● Air-driven for safe operation without electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Volute centrifugal pump ● Also available in a hose connection type for drums "How a Centrifugal Pump Works" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height differences, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "volute pump.

• pump

Air-operated handheld pump for kerosene and light oil, suitable for use in explosion-proof areas, easy to carry, designed for drum cans with hoses on both ends.

ACH Series" ACH-20AL (for kerosene and light oil / pump only) ACHD-20AL (for kerosene and light oil / for drums) ACHH-20AL (for kerosene and light oil / hose at both ends) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Also available in a type for drums with hose connection "Mechanism of the Centrifugal Pump" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height difference, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• pump

Collecting from cast iron powder to PET bottles. An environmentally friendly, manual cleaner that requires no power.

**AJL Series** AJL550S AJL750S AJL920S ◎ No power source required ◎ Standard side brushes included **Benefits** ● Manual operation, no power source needed ● No power cord, can be used on roads and in parks ● Easy to operate, just push, suitable for women and the elderly ● Comes with a collection bucket, no need to dirty hands when disposing of waste ● Can collect PET bottles and empty cans (AJL550S/AJL750S) ● Equipped with a roller brush to collect fine debris (AJL920S) **Features** ● Collects waste simply by pushing ● No power source required ● Floor height adjustment feature ● Two side brushes included as standard ● Dust box that can be easily removed with one touch ● Adjustable handle and brush height ● No backflow of waste with dual side brushes ● Can be stored upright, saving storage space

• pump

Make the work environment even more comfortable! Convenient! 'Options'

"Options" are convenient items that make the work environment even more comfortable. 【Product List】 ■ Drum Carrier DC-NBR ■ Top Plate for Vacuum Pump & Cleaner DTB ■ Filter Band ■ T-Type Nozzle APPQO550TN ■ Filter Set ■ Pail Can Holder ■ Two Filters ■ Drum Stand D-STAND ■ Gun Holder GN-H *For more details, please refer to the catalog or feel free to contact us.

• others

Optimal for liquid level management.

**ZKT Series** ZKT-D-OL (for oil / for drums) ZKT-D-W (for water / for drums) ZKT-P-OL (for oil / for drums) ZKT-P-W (for water / for drums) **Advantages** ● Liquid level detection in just 1 second ● The contact pipe section is made of stainless steel, making it durable ● Lightweight and easy to carry **Liquid Level Gauge Series** E-C (for oil) **Advantages** ● Lightweight and affordable ● Enables liquid management inside drums ● No electricity or batteries required ● Usable liquids include kerosene, light oil, oil, and water *Solvents and chemicals are not allowed*

• pump

Ideal for liquid management! Used in combination with pumps for usage management (TB-K24 series) for managing the usage of kerosene, diesel, and oil (MK33 series).

**Digital Turbine Flow Meter Series** TB-K24-FM (for kerosene and light oil) TB-K24-Ad (for AdBlue) **Advantages** ● Compact size makes it easy to combine with a gun nozzle ● Allows for discharge volume confirmation at hand **Simple Mechanical Features** ● Calibration provides a repeatability of 0.2% ● Digital display screen (uses two AA batteries) ● Can convert one side to a female thread by attaching a socket *Please be cautious of liquid leakage during connection as the connection port has parallel threads.* **Flow Meter Series** MK33-25D (for kerosene and light oil) MK33-25OL (for oil) **Advantages** ● Large and easy-to-read simple mechanical flow meter ● No risk of ignition or explosion due to mechanical design ● Free movement in four directions **Features** ● Calibration is possible ● Easy reset by turning the lever

• pump

It is convenient to attach it to the end of a hose in combination with an electric pump or air pump. The gun nozzle automatically stops when it is full.

"Auto Stop Gun Nozzle Series" ATNH-20 (25) (for diesel and kerosene) ATNH-FA (for diesel and kerosene / exclusive for FA-100) ATNH-FR (for diesel and kerosene / exclusive for FR-200) ATNH-20 (25) T (for solvents) ATNP-PP25-Ad (for AdBlue) ATNP-SUS20-Ad (for AdBlue) ◎ Stops without using electricity or batteries This nozzle automatically stops when full, using a liquid level sensor without the need for electricity or batteries. Since the auto stop functions at a constant flow rate and pressure, it cannot be used with free fall. *Please pay attention to the usage pressure and flow rate range. 《Benefits》 ● Easy operation at your fingertips ● Automatically stops when full 《Features》 ● Dispenses when squeezed, stops when released ● Includes lever hook ● Not usable with free fall or siphoning methods

• pump

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump.

"Manual Gun Nozzle Series" GN-SUS20 (25) (For Solvents) "Benefits" ● Easy operation at your fingertips ● Usable even if dropped * Please pay attention to the operating pressure. "Features" ● Dispenses when squeezed, stops when released ● Equipped with a lever hook

• pump

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump.

"Manual Gun Nozzle Series" GN-PP20(25) (for solvents, AdBlue, and water) GN-PPW20 (for water) GN-PPS20(25)-Ad (for AdBlue) "Benefits" ● Easy operation at your fingertips ● Usable even with self-weight drop * Please pay attention to the operating pressure. "Features" ● Dispenses when gripped, stops when released ● Includes lever hook

• pump

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump.

"Manual Gun Nozzle Series" GN-AL20 (25) (for Oil, Diesel, Kerosene, Gasoline) GN-AL3025 (for Oil, Diesel, Kerosene) GN-ALT20 (25) (for Solvents) "Benefits" ● Easy operation at your fingertips ● Usable even with self-weight drop *Please pay attention to the operating pressure. "Features" ● Dispenses when squeezed, stops when released ● Includes lever hook

• pump

Organization of the workspace and securing space (desktop rack, single-tier rack, double-tier rack, riser)

《RACK Series》 ● Single-tier rack (chrome) RACK1-M ● Single-tier rack (stainless steel) RACK1-S ● Double-tier rack (chrome) RACK2-M ● Double-tier rack (stainless steel) RACK2-SUS ● Tabletop rack (chrome) RACKT-M ● Tabletop rack (stainless steel) RACKT-S ● Elevation device (chrome) RACKC-M ● Elevation device (stainless steel) RACKC-SUS 《Benefits》 ● By placing cans, space can be secured and organized, making the workspace tidy ● Using the elevation device allows for efficient liquid extraction 《Features》 ● Usable for both pails and one-gallon cans ● Available in two materials: chrome and stainless steel

• pump

For dispensing liquids from a drum. Simply insert into the small plug of the drum for air release.

"Drum Cock Series" DMA-5 (For Oil) "Benefits" ● Easy to install, can be stored while attached ● Air release possible by opening and closing the screw ● No power source required ● Prevents vaporization of highly volatile liquids when used in conjunction with the drum cock "Features" ● Dedicated for JIS standard 200L closed drums (small plug G3/4) ● Air release ● Easy installation

• pump

For dispensing liquids from a drum. A convenient tap that allows for easy pouring like a server.

"Drum Cock Series" DMO-10 (for oil) DMY-20 (for solvents) DMY-100 (for oil / valve diameter Φ12.5) DMY-150 (for oil / valve diameter Φ16.0) DMY-200 (for oil / valve diameter Φ20.0) DMY-250 (for oil / valve diameter Φ24.5) DMN-30 (for high viscosity oil and solvents) ◎ Easy installation and operation Simply screw it into the drum for connection. Operation is as easy as twisting the upper lever. 《Benefits》 ● Easy installation, can be stored while attached ● Viscosity and material can be selected according to the liquid used 《Features》 ● Dedicated to JIS standard 200L closed drums (large plug G2) ● Mechanism for dispensing liquid by placing the drum horizontally and using its own weight ● Easy installation

• pump

For dispensing liquids from pails and one-gallon cans. A convenient faucet that allows for easy pouring like a server.

"Pail Cock Series" ND-40 (for oil / can discharge outlet outer diameter Φ40.8) ND-50 (for oil / can discharge outlet outer diameter Φ48.8) ◎ Easy to install and operate It can be connected simply by screwing it into a one-gallon can or pail. *If the spout is made of resin, it will be a custom order, so please contact us. It cannot be used with standard products. 《Benefits》 ● Easy installation, can be stored with the cock attached ● Viscosity and material can be selected according to the liquid used ● Compatible with high-viscosity liquids 《Features》 ● Designed specifically for pails and one-gallon cans with spout outer diameters (Φ40.8・Φ48.8) ● Mechanism for dispensing liquid by placing the can horizontally and using its own weight ● Easy installation ● Two sizes of installation openings available (Φ40.8・Φ48.8) *For pails and one-gallon cans, the size of the can discharge outlet refers to the outer size, not the inner size of the outlet.

• pump

For dispensing liquids from a pail or a one-gallon can. A convenient faucet that allows for easy dispensing like a server.

"Pail Cock Series" SP-L40 (For solvents / Can discharge outlet outer diameter Φ40.8) SP-L50 (For solvents / Can discharge outlet outer diameter Φ48.8) * Pail (P), One-gallon can (I) ◎ Easy to install and operate Simply screw it into a one-gallon can or pail for connection. Operation is as easy as twisting the upper lever. * If the spout is made of resin, it will require a custom order, so please inquire. It cannot be used with standard products. ◎ Lever Lock The lever is locked, so there is no risk of leakage if the lever is accidentally bumped during operation. 《Benefits》 ● No need to drill holes in the can ● Smooth discharge without pulsation ● Easy installation, can be stored with the cock attached ● Options for viscosity and material selection according to the liquid used 《Features》 ● Designed specifically for pails and one-gallon cans with spout outer diameters (Φ40.8・Φ48.8) ● Mechanism for dispensing liquid by placing the can horizontally and using its own weight ● Air release and lever lock included ● Easy installation ● Two sizes of installation openings available (Φ40.8・Φ48.8) * For pails and one-gallon cans, the size of the can discharge outlet refers to the outer diameter, not the inner diameter of the outlet.

• pump

For dispensing liquids from pails and one-gallon cans. A convenient faucet that allows for easy dispensing like a server.

"Pail Cock Series" SP-40 (For solvents / Can discharge outlet outer diameter Φ40.8) SP-50 (For solvents / Can discharge outlet outer diameter Φ48.8) *Pail can (P), One-gallon can (I) ◎ Easy to install and operate Simply screw it into the one-gallon can or pail can for connection. Operation is as simple as twisting the upper lever. *If the nozzle is made of resin, it will be a custom order, so please inquire. It cannot be used with standard products. 《Benefits》 ● No need to make holes in the can ● Smooth discharge without pulsation ● Easy installation, can be stored with the cock attached ● Viscosity and material can be selected according to the liquid used 《Features》 ● Designed specifically for pail cans and one-gallon cans with nozzle outer diameters (Φ40.8・Φ48.8) ● Mechanism for dispensing liquid by placing the can horizontally and using its own weight ● Equipped with air vent ● Easy installation ● Two sizes of installation openings available (Φ40.8・Φ48.8) *For pail cans and one-gallon cans, the size of the can discharge outlet refers to the outer size, not the inner size of the outlet.

• pump

For dispensing liquids from pails and one-gallon cans. A convenient faucet that allows for easy dispensing like a server.

"Pail Cock Series" BVA-40 (for oil / can discharge outlet outer diameter Φ40.8) BVA-50 (for oil / can discharge outlet outer diameter Φ48.8) * Pail (P), One-gallon can (I) ◎ Easy to install and operate Simply screw it into a one-gallon can or pail for connection. Operation is as simple as twisting the upper lever. * If the spout is made of resin, it will require a custom order, so please inquire. It cannot be used with standard products. 《Benefits》 ● No need to make holes in the can ● Smooth discharge without pulsation ● Easy installation, can be stored with the cock attached ● Viscosity and material can be selected according to the liquid used 《Features》 ● Designed specifically for pails and one-gallon cans with spout outer diameters (Φ40.8 and Φ48.8) ● Mechanism for dispensing liquid by placing the can horizontally and using its own weight ● Equipped with air release ● Easy installation ● Two sizes of installation openings available (Φ40.8 and Φ48.8) * For pails and one-gallon cans, the size of the can discharge outlet refers to the outer diameter, not the inner diameter of the outlet.

• pump

No need to puncture the can, pulsation-free and splash-proof barrel cock.

"Pail Cock Series" PC-40PP (For Oil) ◎ Automatic Air Feed Function Thanks to a new mechanism, it allows for smooth liquid dispensing without puncturing the can. When not in use or during storage, the can remains unpunctured, enabling airtight storage. This means there is no need to worry about liquid odors or evaporation. ◎ Safe and Waste-Free with No Pulsation Since there is no pulsation during dispensing, it prevents liquid splashing and scattering onto the floor or people, ensuring safety. Additionally, it reduces liquid loss, eliminating waste. ◎ Easy Installation and Operation It can be connected simply by screwing it into a one-gallon or pail can. Operation is as easy as twisting the upper lever. After use, the lever can be rotated from top to bottom to prevent liquid dripping. 《Benefits》 ● No need to puncture the can ● Smooth dispensing without pulsation ● No liquid dripping after use ● Adapter is washable 《Features》 ● Designed specifically for pail cans and one-gallon cans with a mouthpiece outer diameter of 41mm ● Equipped with an air release float ● Made entirely of lightweight resin ● Easy installation

• others

No oil supply required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFD-18NL ◎ Equipped with a non-lubricated air motor ◎ Adjustable angle ◎ Tabletop type "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various types and sizes available to suit the usage location ● Stepless speed adjustment through air valve throttling ● Stable construction, resistant to tipping over ● No oil required, no lubricator needed ● Noise reduction of approximately 5% ● Air consumption reduced by 5% * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-lubricated air motor ● Stable construction, resistant to tipping over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation in LP gas underground tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• Heating and cooling equipment and facilities

No oil refilling is required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFK-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle ◎ Wall-mounted "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various types and sizes available to suit the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, no lubricator needed ● Noise reduction of approximately 5% ● Air consumption reduced by 5% * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement for drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity environments (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• Heating and cooling equipment and facilities

No oil supply required with lubricators. Uses a maintenance-free air motor.

"Fan Series" AFF-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle ◎ Floor type "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various types and sizes to choose from based on the usage location ● Stepless adjustment of rotation speed using air valve throttling ● Stable construction that is difficult to topple ● No oil required without a lubricator ● Noise reduction of approximately 5% ● Air consumption reduced by 5% * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with oil-free air motor ● Stable construction that is difficult to topple ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity environments (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• Heating and cooling equipment and facilities

No oil refilling required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFG-24NL ◎ Equipped with a non-lubricated air motor ◎ Adjustable angle ◎ Large 24-inch stand type "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various types and sizes available to suit the usage location ● Stepless adjustment of rotation speed using the air valve throttle ● Stable construction that is difficult to tip over ● No oil required, no lubricator needed ● Noise reduction of approximately 5% ● Air consumption cut by 5% * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-lubricated air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement for drying operations ● Usable in high temperature and high humidity (Temperature: 0 to 60 degrees (°C)) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for LP gas and underground tank areas, and installation in manholes on ships and decks.

• Heating and cooling equipment and facilities

No oil supply required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFG-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity conditions (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only in factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, and installation in manholes on ships and decks, the uses are diverse.

• others

No oil supply needed with lubricators; equipped with a maintenance-free air motor for powerful performance! Speedy ventilation!

"Oil-Free Air Axial Flow Fan and Blower Series" AFR-08NL/AFR-12NL ◎ Equipped with an oil-free air motor Can be used without oil and without a lubricator. It features a long-lasting motor suitable for continuous operation and can be used in explosion-proof areas. ◎ An essential item for explosion-proof areas and heat hazard zones! Ventilation for infection control! Because it uses an air motor... Point 1: Lightweight! Up to 1/4 the weight of electric pressure-resistant explosion-proof blowers (compared to other manufacturers' 12-inch model axial flow fans weighing 25.5 to 37.5 kg) Point 2: Safe and secure without using power! Point 3: Fewer breakdowns! Can be used as a circulator. 《Applications》 ● Heat stroke prevention ● Infection control measures for diseases like COVID-19 ● Efficiency improvement for drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 5-40°C) * Please consult separately for other environmental conditions. 《Field》 Not only for factories such as chemical plants, painting factories, automobile transport vessels, and shipyards, but also for various applications such as tunnel construction, as a replacement for explosion-proof fans for ventilation in underground LP gas tank stations, and installation in manholes on ships and decks.

• Ventilation and smoke exhaust equipment

To manage usage so that we can understand who supplied how much. The convenience of being able to take out only the necessary amount, like a stand.

"SSD-25Ad Series" SSD-25Ad (for AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suitable for Japan to respond to customer feedback. 《Benefits》 ● Manage usage ● Set extraction amount ● Automatic stop when full 《Features》 ● Power supply is AC100V ● Authentication via a certification key or touch key ● Power ON/OFF detection with nozzle storage ● Data can be output to a PC

• pump

Easily dispense AdBlue from an IBC container with a supply tank located at a high position.

"IBC Series" IBC-MASTER (for AdBlue) IBC-MASTER-K24 (for AdBlue) IBC-PRO100 (for AdBlue) IBC-BASIC100 (for AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant products ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suitable for Japan to respond to our customers' voices.

• pump

The supply tank containing AdBlue in an IBC container located at a high position can be divided into smaller portions by its own weight from the bottom outlet of the IBC container.

Product Image Description 1. Self-weight drop hose set JEH series representative image 2. 50A Coupler type JEH-AK (2-port cap KK-2V + liquid extraction hose set A 50A coupler type JEH-A) 3. Screw type JEH-BK (2-port cap KK-2V + liquid extraction hose set B screw type JEH-B) 4. Screw type JEH-BKA (2-port cap KK-2V + liquid extraction hose set B screw type JEH-BA) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 《Benefits》 ● Cost-effective and expense-reducing ● Easy to portion with manual gun nozzle 《Features》 ● For IBC containers ● The top of the container is equipped with a 2-port cap with a supply connection coupler and air vent ● The lower connection port of the container supports two types: 50A coupler type and screw cap type

• pump

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

**D-SET Series** D-SET100 (For AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suitable for Japan in response to customer feedback. ◎ Dedicated pump that can be attached to a resin drum **Benefits** ● Ensures safety during movement and refueling by securely fixing to the top of the drum ● Comes with a manual gun nozzle for easy dispensing **Features** ● For 200L resin drums (resin drum sold separately) ● Power supply: AC100V ● Diaphragm pump type ● Maximum discharge head: 6m, maximum discharge volume: 22L/min ● Built-in thermal protector for safety and peace of mind

• others

Purification of diesel exhaust gases with AdBlue. When you want to quickly portion out AdBlue contained in a resin drum.

"Ad Series" Ad-2 (for AdBlue / Electric) Ad-2Air (for AdBlue / Air-operated) Ad-2L (for AdBlue / Lithium battery-operated) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suited to Japan in response to customer feedback. "Benefits" ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed "Features" ● For IBC containers

• pump

AdBlue for purifying diesel exhaust gases When you want to quickly portion out AdBlue from a resin drum.

"Ad Series" Ad-1 (for AdBlue / Electric) Ad-1Air (for AdBlue / Air-operated) Ad-1L (for AdBlue / Lithium battery-operated) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and needs change, we are currently developing and importing AdBlue products suitable for Japan in response to customer feedback. "Benefits" ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed "Features" ● Dedicated to JIS standard 200L closed drum (large cap G2) * Optional specifications available for Kodama resin and Sanko manufactured adapters.

• pump

Water absorption of 6m (2.5m when dry) and a performance of 15m in height. Made of aluminum, lightweight, and equipped with a manual water supply pump.

"HWA Pump Series" - HWA-0 (Brass for key parts / for water) - HWA-2 (Brass for key parts / for water) ◎ For emergency water supply pump ◎ Liquid transfer ◎ Lightweight and compact 《Benefits》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Lightweight water wing pump ● Flange is screw type ● Body made of aluminum casting

• pump

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"King Wing Pump Series" - FC-CAC 15A to 50A (Brass for essential parts / for oil) ◎ For emergency water supply pumps ◎ Liquid transfer 《Benefits》 ● Suction performance of 6m (2.5m when dry) and discharge of 15m ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● With screw-type phase flange ● Only essential parts made of brass

• pump

Pulsation-free discharge during carrier movement. Due to high pressure, injection and spraying are also possible.

《APP-C Series》 APP-C-AL (for oil) APP-C-SUS (for solvents) ◎ Compatible with different diameter cans, including pails and drums ◎ Suitable for high-viscosity liquids ◎ Discharges liquids without waste 《Benefits》 ● For high-viscosity liquids (below 5,000 cP) ● Minimal residual liquid, no pulsation ● Can transfer to high places or long distances under high pressure 《Features》 ● Sealed pressurized type, for discharge only ● Entirely pressurizes pails and drums ● Continuous operation possible ● Lifting capacity of 30m ● Usable with air compressors of 1 horsepower (0.75 kW) or more

• pump

Quickly transfer low-viscosity liquids.

"DF-4P Series" DF4P-15G (for oil, kerosene, light oil, gasoline) DF4P-15AS (for solvents) DF4P-15SUS (for solvents) ◎ Air-driven ◎ Compatible with high-viscosity liquids "Benefits" ● Efficiently transfers medium viscosity liquids ● Usable with flammable liquids and small amounts of foreign matter contamination ● Ideal for horizontal and high-lift transfer "Features" ● Continuous operation possible ● Lifting capacity of 20-30m *Please be sure to use an air filter and lubricator.

• others

Quickly transfer low-viscosity liquids.

《MH Series》 MH21N-V (for solvents) MH316M-V (for solvents) ◎ Air-driven ◎ Two types: plastic and stainless steel 《Benefits》 ● Safely transfers highly flammable liquids ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with plastic cans and one-gallon cans 《Features》 ● Equipped with a ball valve ● Two types: stainless steel and plastic * Please be sure to use an air filter and lubricator.

• pump

Quickly transfer low-viscosity liquids.

"MH Series" MH21N-V (for solvents) MH316M-V (for solvents) ◎ Electric 100V ◎ Two types: plastic and stainless steel "Benefits" ● Usable anywhere with a 100V power supply ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with plastic cans and one-gallon cans "Features" ● Equipped with a ball valve ● Two types: stainless steel and plastic

• others

Easily portion high-viscosity liquids from pails and one-gallon cans.

"P-S Series" P-S (for oil) P-SX (for solvents) P-SXT (for solvents) ◎ Manual pump that does not require a power source ◎ Compatible with high-viscosity liquids "Benefits" ● No power supply needed ● For high-viscosity liquids (below 10,000 cP) ● Can portion oils that harden in winter ● SUS models are compatible with various solvents (P-SX, P-SXT) ● Extremely useful in emergencies and disasters "Features" ● For 41mm outer diameter of pails and one-gallon cans (40mm adapter included as standard) *Optional 50mm adapter also available ● Continuous pumping is possible ● Discharges when the piston is lifted using an up-and-down piston mechanism *Please pull the handle slowly for higher viscosity liquids.

• pump

For the recovery of waste liquid from 5 meters below the underground pit.

《APPQO Series》 APPQO-H (for oil / liquid only) APPQO-HG (for kerosene and diesel / liquid only) APPQO-HAS (for solvents / liquid only) ◎ Compatible with high-viscosity liquids due to vacuum pressure type ◎ Simple structure with no known failures ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a stainless steel can ● Continuous operation possible ● Less prone to breakage compared to electric types ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Liquid only (general oils, etc.) ● Recommended for stainless steel cans (APPQO-SK) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75 kW) or more

• Piping and insulation

Collect low-viscosity liquid into an open pail.

"APPQO Series" APPQO (for oil / liquid only) APPQOG (for kerosene and diesel / liquid only) APPQOAS (for solvents / liquid only) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Can suction one pail in about 15 seconds ● Continuous operation possible ● Less likely to break compared to electric models ● Air-driven, safe for use in explosion-proof areas, no risk of ignition "Features" ● Liquid only (general oil, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1 and plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 1 horsepower (0.75kw) or more

• pump

Collect low viscosity liquid into a closed pail.

《APPQ Series》*For Closed Pail Cans Only APPQ (For Oil / Liquid Only) APPQG (For Kerosene / Light Oil / Liquid Only) APPQAS (For Solvents / Liquid Only) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on commercially available closed pail cans ● Continuous operation possible ● Less prone to breakage compared to electric models ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For liquids only (general oils, etc.) ● For JIS standard 20L closed pail cans ● Usable with air compressors of 1 horsepower (0.75kw) or more ● Outer diameter dimension of the can opening (for 41mm)

• pump

A vacuum cleaner for collecting oil and metal shavings, equipped with a drum for easy disposal. It's convenient for site cleaning as it can handle both dry and wet materials.

"APPQO Series" APPQO600S (For oil / Wet and dry use) APPQO600 (For oil / Wet and dry use) APPQO600-SET (For oil / Wet and dry use) APPQO600-TC200 (100/50) (For oil / Wet and dry use / Drum can specification *Drum can itself is not included) APPQO600-DTC200 (100/50) (For oil / Wet and dry use / Drum can specification) *Drum can specification (Top plate, Carry) ◎ Simple structure with no failures ◎ Equipped with new features for greater convenience, easy operation possible ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry use ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition "Features" ● For collection only (general oil, oil, chips, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• Building Cleaning Equipment

Transfer and portioning of kerosene and light oil contained in tanks or containers.

"ERF Series" ERF-20B (For Oil) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories 《Benefits》 ● Easy operation by simply turning the handle ● Possible to connect hoses at both ends ● No power supply needed ● Usable with A heavy oil and low viscosity oil (below 500 cP) ● Great for emergencies and disasters 《Features》 ● Continuous pumping is possible ● Threaded at both ends (Rc3/4) ● Comes with a base * A version without a base is also available as an option.

• Air compressors, blowers and pumps

Transporting high-viscosity liquids simply by moving the handle up and down.

"Straight Series" S-L (for oil) S-LH-1 (for oil / with hose) S-LX (for solvent) S-LXHS (for solvent / with hose) ◎ Hand piston pump that requires no power source ◎ Compatible with high-viscosity liquids ◎ Continuous pumping possible with siphon function "Benefits" ● No power supply required ● Compatible with high-viscosity liquids (below 10,000 cP) with a specific gravity of 1.5 or less ● Can portion winter oils that become hard (S-L series) ● SUS models are compatible with various solvents (S-LX series) ● Very useful in emergencies and disasters "Features" ● Continuous pumping possible ● Discharge occurs when the piston is pulled up using an up-and-down piston mechanism * For high-viscosity liquids, please pull the handle slowly ● Siphon effect works for low-viscosity liquids ● Discharge volume per stroke is 600 cc

• pump

Hand-cranked pump that performs exceptionally well even in emergencies. Lightweight body made of resin, suitable for dispensing organic solvents.

**HRP Series** HRP-25III (for solvents) HRP-25III H (for solvents / with hose) HRP-25III HM (for solvents / with hose, sealed adapter, and grounding wire) HRP-25Z (for solvents) HRP-25ZM (for solvents / with hose and sealed adapter) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Lightweight body made of resin ◎ Suction pipe can be cut **Benefits** ● Simple operation by just turning the handle ● Lightweight and easy to replace ● No power supply needed ● Can also dispense highly flammable organic solvents in small quantities ● Compatible with low-viscosity liquids (below 500 cP) and specific gravity (below 1.1) ● Safe for highly volatile liquids with sealed adapter (HRP-25 3HM/HRP-25ZM) ● Great for emergencies and disasters ● Compatible with weak acids and weak alkali chemicals due to resin material (HRP-25Z series) **Features** ● Continuous pumping is possible ● Securely fixed to drums with an adapter ● Comes with a 40-mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid type

• pump

Hand-crank pump that performs exceptionally well even in emergencies. Made of all stainless steel for dispensing organic solvents.

"HRD Series" HRD-25SUS (for solvents) HRD-25SUSH (for solvents / with hose) HRD-25SUSHM (for solvents / with hose, sealed adapter, and grounding wire) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Continuous pumping is possible ◎ Suction pipe can be cut 《Benefits》 ● Easy operation by simply turning the handle ● No power supply needed ● Flammable organic solvents can be dispensed in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.5) ● High volatility liquids can be safely handled with a sealed adapter (HRD-25SUSHM) ● Very useful in emergencies and disasters 《Features》 ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause tearing.

• Piping and insulation

Hand-cranked pump that performs exceptionally well even in emergencies. Transfers low-viscosity liquids.

"HR Series" HR-2B (for oil) HF-1000 (for oil / high flow rate) ◎ Hand-operated pump that does not require a power source ◎ Can be used without sealing the drum ◎ Widely usable from household drums to factories ◎ Suction pipe can be cut "Benefits" ● Simple operation by just turning the handle ● No power supply needed ● Can be used with A heavy oil and low viscosity oil (below 500 cP) ● Great for emergencies and disasters "Features" ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● No strainer * The material of the hose during replacement will be PVC (transparent).

• pump

A convenient system that combines a pump and a flow meter. The long-awaited flow meter integrated drum pump.

"CUBE Series" CUBE-56K (for kerosene and light oil / wall-mounted) CUBE-56T (for kerosene and light oil / tabletop) CUBE-56S (for kerosene and light oil / stand) ◎ Measured refueling for kerosene and light oil ◎ Pump and flow meter in one box 《Benefits》 ● The amount dispensed is visible at a glance ● Usage can be managed ● No worry of overflow with automatic stop when the container is full ● Continuous operation is possible 《Features》 ● Choose from three types: tabletop (T), wall-mounted (K), and stand (S) ● Power supply: 100V ● Flow meter and auto-stop gun included as standard ● The pump's power automatically turns off when the gun nozzle is stored

• pump

A convenient system that combines a pump and a flow meter. The long-awaited flow meter integrated drum pump.

"CUBE Series" CUBE-70K (for kerosene and light oil / wall-mounted) ◎ Measuring fuel supply for kerosene and light oil ◎ Pump and flow meter in one box 《Benefits》 ● Maximum discharge rate of 70L per minute ● Easy to see the amount dispensed at a glance ● Manage usage effectively ● No worry of overflow with automatic stop when the container is full ● Continuous operation possible 《Features》 ● Power supply: 100V ● Flow meter and auto-stop gun included as standard ● Pump power automatically turns off when the gun nozzle is stored

• Weighing scale

Just turn on the switch for easy use! A pump perfect for transferring kerosene and light oil!

"FA Series" FA-100ATN (for kerosene and light oil / with auto-stop gun) FA-100K24 (for kerosene and light oil / with flow meter) FA-100ATNK24 (for kerosene and light oil / with auto-stop gun and flow meter) "Benefits" ● Koshin FA-100 ● Available with flow meter and auto-stop gun, suitable for various applications "Features" ● Dedicated for JIS standard 200L closed drum (large cap G2) ● Rated for 30 minutes ● Convenient household power source AC-100V drum pump ● Equipped with relief valve

• pump

A portable electric hand pump. It is ideal for transferring relatively high-viscosity oil and for use at high elevations.

"EV Series" EV-100 (for oil / 100V / pump only) EV-200 (for oil / 200V / pump only) EV-12 (for oil / 12V / pump only) EV-100H (for oil / 100V / pump only) EVD-100 (for oil / 100V / for drum) EVD-200 (for oil / 200V / for drum) EVD-12 (for oil / 12V / for drum) EVD-100H (for oil / 100V / for drum) EVH-100 (for oil / 100V / both ends of hose) EVH-200 (for oil / 200V / both ends of hose) EVH-12 (for oil / 12V / both ends of hose) EVH-100H (for oil / 100V / both ends of hose) *Not suitable for kerosene, light oil, solvents, etc. "Advantages" ● Capable of handling general oil VG400 and gear oil SAE140 at 15℃ ● Lever coupling type allows for one-touch attachment and detachment ● Options for flow meters and manual nozzles available, making it versatile for various applications ● If you want to discharge a large amount of oil below 1,000 cP, the EV-100H is optimal.

• pump

High flow rate, high lift pressure-resistant explosion-proof motor pump. For the transfer and dispensing of flammable liquids.

**EMM Series** EMM-25PP (for solvents) EMM-25SUS (for solvents) **Benefits** ● High discharge volume and high head pressure explosion-proof motor pump ● Liquid transfer and small packaging in fire hazard areas ● High performance with 40L per minute and a lift height of 8m ● Suitable for transferring and small packaging of gasoline (EMM-25SUS) **Features** ● Equipped with pressure explosion-proof motor (d2G3) ● For low viscosity liquids (below 50cp) *Note: The outlet is not explosion-proof.*

• pump

Pursuing reasonable prices. For the transportation of dilute sulfuric acid and alkaline solvents in fire-restricted areas.

**CHD Series** CHD-20PP (for solvents) CHD-20PPV (for solvents / with ball valve) CHD-20PPN (for solvents / with gun nozzle) CHD-20HPP (for solvents) CHD-20HPPV (for solvents / with ball valve) CHD-20HPPN (for solvents / with gun nozzle) CHD1-20SUS (for solvents) CHD1-20SUSV (for solvents / with ball valve) CHD1-20SUSN (for solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only PSE (Electrical Appliance and Material Safety Law) compliant product PSE compliant product for safety and security

• pump

A portable air-operated hand pump that can be used in explosion-proof areas. For transferring liquids such as kerosene, diesel, and lubricating oil from tanks or drums.

**AMVH Series** AMVH-20FC (for oil, kerosene, and diesel / pump only) AMVH-20SUS (for solvents / pump only) AMVHD-20FC (for oil, kerosene, and diesel / for drums) AMVHH-20FC (for oil, kerosene, and diesel / hose at both ends) AMVHD-20SUS (for solvents / for drums) ◎ Explosion-proof specification that does not use electricity ◎ Usable without sealing the drum ◎ Customizable **Benefits** ● Capable of transferring medium viscosity liquids (up to 1500 cP) ● Safe due to air-driven operation, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Maximum lift height of 5m ● Spiral type centrifugal pump ● Also available in a hose connection type for drums

• pump

Air-operated handheld pump that can be used in explosion-proof areas and is easy to carry.

"ACH Series" ACH-20AL (for kerosene and light oil / pump only) ACH-20SUS (for solvents / pump only) ACHD-20AL (for kerosene and light oil / for drum) ACHH-20AL (for kerosene and light oil / both ends of hose) ACHD-20SUS (for solvents / for drum) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge capacity of 50L/min ● Safe due to air drive, no electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral type centrifugal pump ● Also available in drum type, hose connection type

• pump

A pump suitable for transferring liquids with a viscosity of 20,000 cP or less! A high-lift pump with a discharge height of 50m (equivalent to ISO 1,000).

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Maximum lift capacity of 50m ●Piston-type pump (with pulsation)

• pump

A pump suitable for transferring liquids with a viscosity of 20,000 cP or less! A high-lift pump with a discharge height of 50m (equivalent to ISO 1,000).

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Maximum lifting capacity of 50m ●Piston-type pump (with pulsation)

• pump

A pump ideal for transferring liquids with a viscosity of 20,000 cP or less. A high-lift pump with a discharge height of 50m (equivalent to ISO 1,000).

"PST Series" PST-20G (for oil) PST-20SUS (for solvents) ◎ Explosion-proof design that does not use electricity ◎ Compatible with high-viscosity liquids ◎ Can be used without sealing the drum ◎ Powerful discharge "Benefits" ● Efficient transfer of high-viscosity liquids ● Safe transfer of flammable liquids ● Ideal for horizontal and high-lift transfer ● Continuous operation possible "Features" ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Maximum lift capacity of 50m ● Piston-type pump (with pulsation)

• pump

[For Solvents / Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed for a reasonable price.

**CHD Series** CHD-20AHP (For solvents) CHD-20AHPV (For solvents / with ball valve) CHD-20AHPN (For solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for peace of mind and safety ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume and no pulsation ● Discharge only **Replacement of Motor Head** The head part (motor part) is easy to detach and attach, allowing for replacement of the air motor type with an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement.

• pump

Ideal for transferring liquids from oil drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-purpose for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Equipped with an anti-static grounding wire (for G and AS only) ●Built-in float ball for leak prevention function

• pump

Ideal for transferring liquids from drums for kerosene, light oil, and gasoline! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-use for suction and discharge ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Equipped with an electrostatic discharge grounding wire (for G and AS only) ●Built-in float ball for leak prevention function

• pump

Ideal for transferring liquids from solvent drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-purpose for suction and discharge ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Equipped with an anti-static grounding wire *only for G and AS ●Leak prevention function with built-in float ball

• pump

Collection of cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums for oil use.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Safely sucks volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for drum cans, suction only, no discharge ●Equipped with an anti-static grounding wire *Only for G and AS ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and sucks in external air 5. Liquid is sucked in through the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• pump

Collection of cutting fluids, waste oil, and solvents such as kerosene, light oil, gasoline, IPA, methanol, and toluene in drums.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Safely sucks volatile and flammable liquids ●Inexpensive with low failure rates, reducing costs ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for drum, suction only, discharge not possible ●Equipped with grounding wire for static electricity measures *Only for G and AS ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside through the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and sucks in external air 5. Liquid is sucked in through the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• pump

Collection of cutting fluids, waste oils, and solvents such as IPA, methanol, and toluene in drums.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ● Safely suction volatile and flammable liquids ● Cost-effective with low failure rates, reducing expenses ● Low air consumption, energy-saving ● Acceptable for small amounts of foreign substances ● Continuous operation possible ● Automatic stop when full ● Easy adapter installation (bag nut type) 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed negative pressure type for suction only, discharge not possible ● Equipped with an anti-static grounding wire *only for G and AS ● Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside through the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and draws in external air 5. Liquid is suctioned through the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• pump

For transferring high-viscosity liquids in large volumes for solvents, acids, and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary specifications with hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Not compliant with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drum, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• pump

For oil use: Large capacity transfer of high-viscosity liquids; disassembly and cleaning possible.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with a regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• pump

[Sanitary Product / Heller Joint Specification] For the large-volume transfer of high-viscosity liquids! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Advantages》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record for food use (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• pump

For transferring high-viscosity liquids in large volumes for acids and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available with sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• pump

Pump for transferring using internal pressure with compressed air, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized type for discharge only, not for recovery ● Double pressure reduction with a regulator and safety valve for peace of mind ● Equipped with an earth wire for static electricity measures (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. * Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable with small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced-pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not allowed.

• pump

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), capable of efficient discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meters and gun nozzles are not compatible with foreign matter contamination.

• pump

Pump for transferring kerosene, light oil, and gasoline using compressed air to utilize internal pressure! Minimizes residual liquid, energy-saving, and safely allows for small portions of highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

A pump that uses compressed air to utilize internal pressure for transfer! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), capable of waste-free discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Designed for discharge only with sealed pressurized drum, not for recovery ● Double pressure reduction with regulator and safety valve for added safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Air Pressure Pump Mechanism≫ This pump introduces reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle versions do not allow for foreign matter contamination.

• pump

High-viscosity oils and flammable liquids can also be transported to high places or long distances.

**DF4 Series** DF4D-20G (for oil / drum) DF4D-20AS (for solvent / drum) DF4H-15G (for oil / both ends of hose) DF6D-20G (for oil, kerosene, diesel, gasoline / drum) DF6D-20AS (for solvent / drum) DF6D-20SUS (for solvent / drum) DF6H-20G (for oil, kerosene, diesel, gasoline / both ends of hose) ◎ Explosion-proof design that does not use electricity ◎ Compatible with high-viscosity liquids ◎ Usable without sealing the drum ◎ Powerful discharge **Benefits** ● Efficient transfer of high-viscosity liquids ● Safe transfer of flammable liquids ● Ideal for lateral and high-lift transfer ● Can be used as a circulation pump due to continuous operation capability **Features** ● Exclusively for JIS standard 200L closed drums (large cap G2) ● High lifting capacity ● Diaphragm pump (with pulsation)

• pump

Collecting cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums.

"APDQ1 Series - Inhalation Only" APDQ1-25 (for oil) APDQ1-25G (for kerosene, diesel, gasoline) APDQ1-25AS (for solvents) ◎ Explosion-proof design that does not use electricity ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Safely suction volatile and flammable liquids ● Cost-effective with low failure rates, reducing expenses ● Low air consumption, energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy adapter installation (bag nut type) "Features" ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Suction only with a sealed negative pressure system for drums, discharge not possible ● Ground wire for static electricity prevention included (for G and AS only) ● Built-in float ball for leak prevention function

• pump

A chemical pump designed to pursue reasonable pricing. For the transfer of dilute sulfuric acid and alkaline solvents in areas where open flames are prohibited.

Chemical Pump 《CHD Series》 CHD-20APP (for solvents) CHD-20APPV (for solvents / with ball valve) CHD-20APPN (for solvents / with gun nozzle) CHD-20AHP (for solvents) CHD-20AHPV (for solvents / with ball valve) CHD-20AHPN (for solvents / with gun nozzle) 《Benefits》 ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe dispensing of flammable liquids ● Motor part can be replaced 《Features》 ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Air-operated, so no risk of electric leakage ● Air motor type with high discharge volume, non-pulsating ● Dedicated for discharge PSE (Electrical Appliance and Material Safety Law) compliant product PSE compliant product for peace of mind and safety

• pump

Ideal for transferring liquids from a drum. Switching between discharge and suction is easy with just one lever.

"APDX1 Series Dual Use for Inhalation and Exhalation" APDX1-25 (for oil) APDX1-25G (for kerosene, diesel, gasoline) APDX1-25AS (for solvents) ◎ Explosion-proof design that does not use electricity ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Dual use for inhalation and exhalation ● Minimal residual liquid (approximately 200cc), no waste in exhalation ● Safe transfer of volatile and flammable liquids ● Cost-effective with low failure rates, reducing expenses ● Low air consumption, energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Easy adapter installation (bag nut type) "Features" ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Ground wire for static electricity prevention included (for G and AS only) ● Built-in float ball for leak prevention function

• pump

Suitable for large-volume transfer of high-viscosity liquids and can be disassembled for cleaning.

"APDS Series - Discharge Only" APDS-32 (for oil) APDS-25 (32) SUS (for solvents, acids, and alkalis) APDS-1 (1.5)s (sanitary model / hygienic fitting specification) APDS-25PP (for acids and alkalis) ◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate ◎ Can be used for both discharge and suction "Benefits" ● Minimal residual liquid (about 200cc), efficient discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable with small amounts of foreign matter ● Continuous operation possible ● Easy to clean due to a structure that allows for disassembly and cleaning ● Available in sanitary hygienic fitting specifications ● Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) * Not applicable under the Food Sanitation Act. "Features" ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Discharge only with pressurized drum, recovery not possible ● Double pressure reduction with regulator and safety valve for safety ● Pressure section (G3/4) and discharge section (G2) are separated

• pump

A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dividing highly flammable liquids with minimal residual liquid and energy efficiency.

"APD Series - Discharge Only" APD-25 (for oil) APD-25N (for oil / with gun nozzle) APD-25G (for kerosene, light oil, gasoline) APD-25GN (for kerosene, light oil, gasoline / with gun nozzle) APD-25AS (for solvents) APD-25ASN (for solvents / with gun nozzle) APD-25GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Pressure-fed discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types)

• pump

A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dispensing highly flammable liquids with minimal residual liquid and energy efficiency.

"APD Series Discharge Only" APD-20 (for oil) APD-20N (for oil / with gun nozzle) APD-20G (for kerosene, light oil, gasoline) APD-20GN (for kerosene, light oil, gasoline / with gun nozzle) APD-20AS (for solvents) APD-20ASN (for solvents / with gun nozzle) APD-20SUS (for solvents) APD-20SUSN (for solvents / with gun nozzle) APD-20GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (about 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Exclusively for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum type for discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, and SUS types)

• pump

Chemical plants, aircraft factories, shipyards, painting booths. For ventilation, air supply, and cooling of machinery in plants and explosion-proof areas, etc.

"Fan Series" AFR-18 (Fan diameter 450mm) AFR-24 (Fan diameter 600mm) AFR-08NL (Fan diameter 200mm) AFR-12NL (Fan diameter 300mm) AFR-18NL (Fan diameter 450mm) ◎ Air motor factory fan that does not use electricity ◎ Standard equipped with air filter and lubricator ◎ Easy to operate "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas since the power source is air ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over "Features" ● Standard equipped with air filter and lubricator * Please use No. 32 lubricating oil. ● Duct hose can be attached as an option "Applications" ● Heat stroke prevention ● Efficiency improvement for drying work ● Ventilation and air blowing in narrow spaces such as manholes and tanks ● Connecting ducts for ventilation and air blowing in manholes ● Exhaust gas discharge from construction vehicles and heavy machinery ● Air circulation in high-temperature areas and drying rooms

• pump

Ideal for transferring fuel to heavy machinery and agricultural equipment! Fuel can be supplied quickly and safely at the work site!

Italian-made "PIUSI" battery-operated pump series For construction machinery, delivery times, and maintenance of transport vehicles For refueling kerosene and light oil! Available in 12V and 24V specifications. The PIUSI BOX PRO is stored in a case, protecting the pump from dirt and grime. It is ideal for transferring fuel to heavy machinery and agricultural equipment. Fuel can be quickly and safely replenished on the job site. ■CARRY3000-12/24V ■PIUSIBOX BASIC-12V/24V ■PIUSIBOX PRO-12/24V

• pump

Hand-crank pump that performs exceptionally well even in emergencies. For transferring low-viscosity liquids, including gasoline.

"HR Series" HR-25G (For Oil and Gasoline) ◎ Hand-cranked pump that requires no power source ◎ Can be used without sealing the drum ◎ Widely usable from household drums to factories ◎ Suction pipe can be cut "Benefits" ● Easy operation by simply turning the handle ● No power supply needed ● Can be used with A heavy oil and low viscosity oil (below 500 cP) ● Allows for small dispensing of gasoline ● Highly effective in emergencies and disasters "Features" ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh ● Equipped with a magnetic ground wire for static electricity prevention

• others

Options for air-operated axial flow factory fans and blowers.

"Duct Series" ●D-08 (Duct 08) with Grounding [For AFR-08NL] Length: 5m Inner Diameter: φ230 Weight: 3.8kg ●D-12 (Duct 12) with Grounding [For AFR-12NL] Length: 5m Inner Diameter: φ320 Weight: 6.0kg ●D-18 (Duct 18) with Grounding [For AFR-18・18NL] Length: 5m Inner Diameter: φ500 Weight: 8.0kg ●D-24 (Duct 24) with Grounding [For AFR-24] Length: 5m Inner Diameter: φ630 Weight: 10.8kg ●D-08V (Duct 08) without Grounding [For AFR-08NL] Length: 5m Inner Diameter: φ200 Weight: 2.3kg ●D-12V (Duct 12) without Grounding [For AFR-12NL] Length: 5m Inner Diameter: φ300 Weight: 3.3kg ●D-18 (Duct 18) without Grounding [For AFR-18・18NL] Length: 5m Inner Diameter: φ600 Weight: 7.8kg "Features" ■ For ventilation and air supply in explosion-proof areas ■ Equipped with grounding wire ■ Connectable *Common length of 5m

• pump

The air device you have can be operated at your feet. Foot switch for retrofitting, simply step on it to turn it on and off.

**Merits** ● Operable while standing ● Easy ON/OFF with just a foot pedal ● No unnecessary movements, no wasted air consumption ● Both hands are free, increasing work efficiency **Applications** ● Increased work efficiency ● Reduction in air consumption ● Reduction in labor hours ● Safe and efficient two-handed operation ● Line improvement

• pump

The air device you have can be operated "at hand."

**Merits** - No hassle of manually operating the valve when returning - Can be turned ON only when needed - Does not waste air - Easy operation with one hand **Applications** - Increased work efficiency - Reduction in air consumption - Reduction in labor hours - Safe and efficient two-handed operation - Line improvement

• pump

Oil-free air motor factory fan AFF-18NL AFG-18NL! Usable in explosion-proof areas! Air blowing, cooling, ventilation, and heatstroke prevention in fire hazard areas!

Oil-free air motor factory fan AFF-18NL AFG-18NL No hassle of oil refilling <Recommended Points> 1. No need for lubricator oil! Equipped with oil-free air motor 2. Quiet! Approximately 5% noise reduction 3. Energy-saving! Approximately 5% reduction in air consumption *Compared to our conventional products <Can be used as a circulator> The head oscillates approximately 70 degrees up and down for AFF-18NL, and approximately 90 degrees up and down for AFG-18NL, with both allowing about 70 degrees of left and right movement 【Many other factory fans (blowers) available!】 Stand type (AFG series) Standard oscillation function With a left and right oscillation function of 90 degrees, it can send air over a wide area. Tabletop type (AFD series) Can be placed in any available space! Extremely user-friendly tabletop factory fan! Axial flow type (AFR series) Ideal for ventilation and blowing in narrow spaces such as manholes and tanks! Recommended for places where ventilation is difficult. Wall-mounted type (AFW series) Convenient due to being wall-mounted As a wall-mounted factory fan, it can be used without obstructing your feet or hands.

• others

Solve the problems of tank cleaning for machine tools and the recovery of cutting fluids and chips! A document summarizing product features is available.

<Are you facing any of these issues with cleaning around machine tools?> - Cleaning the tank is costly - Cleaning takes too much time, leading to overtime - Cleaning is done on holidays to avoid stopping the machine - Using an electric cleaner in a site where electricity is not desired Our 'Filtration Cleaner/Air Vacuum Cleaner' can solve these problems just by connecting it to a compressor! 'Circulating Tank Cleaning Filtration Cleaner' - Allows tank cleaning even while the machine is running - Just connect the air to handle everything from collection to discharge 'Air-Powered Tank Cleaning Filtration Cleaner' - Can be used simply by placing it on an existing open drum and connecting the air hose - Collects all cutting fluid and chips first, then discharges only clean cutting fluid 'Air Vacuum Cleaner' - Durable and maintenance-free. Can be washed thoroughly - Capable of sucking up dust, chips, and oil, suitable for both dry and wet use

• pump

Solve the problems of tank cleaning for machine tools and the recovery of cutting fluids and chips! A document summarizing product features is available.

<Are you facing any of these issues with cleaning around machine tools?> - Cleaning the tank is costly - Cleaning takes too much time, resulting in overtime - Cleaning on holidays to avoid stopping the machine - Using electric cleaners in areas where electricity is not wanted Our 'Filtration Cleaner/Air Vacuum Cleaner' can solve these problems just by connecting it to compressed air! 'Circulating Tank Cleaning Filtration Cleaner' - Allows tank cleaning even while the machine is running - Just connect the air to handle collection and discharge 'Air-Powered Tank Cleaning Filtration Cleaner' - Can be used simply by placing it on an existing open drum and connecting the air hose - Collects all cutting fluid and chips first, then discharges only clean cutting fluid 'Air Vacuum Cleaner' - Durable, maintenance-free, and can be washed thoroughly - Can suck up dust, chips, and oil; suitable for both dry and wet use ● For more details, please download the PDF and take a look.

• pump

Solve the problems of tank cleaning for work machines and the recovery of cutting fluids and chips! A document summarizing product features is available.

<Are you facing any of these issues with cleaning around machine tools?> - Cleaning the tank is costly - Cleaning takes too much time, leading to overtime - Cleaning is done on holidays to avoid stopping the machine - Using an electric cleaner in a site where electricity is not desired Our 'Filtration Cleaner/Air Vacuum Cleaner' can solve these problems just by connecting it to compressed air! 'Circulating Tank Cleaning Filtration Cleaner' - Can clean the tank while the machine is running - Just connect the air to handle everything from collection to discharge 'Air-operated Tank Cleaning Filtration Cleaner' - Can be used simply by placing it on an existing open drum and connecting the air hose - Collects all cutting fluid and chips first, then discharges only clean cutting fluid 'Air Vacuum Cleaner' - Durable and maintenance-free. Can be washed thoroughly - Can suck up garbage, chips, and oil; suitable for both dry and wet use ● For more details, please download the PDF and take a look.

• pump

Reduce downtime by cleaning the cutting fluid tank! Easy collection and disposal. Continuous operation is OK. J-F series and APDQO series.

We manufacture and sell the "Air-Powered Tank Cleaning Filtration Cleaner" to reduce the burden of daily cleaning of cutting fluid tanks. This product is recommended for those who face issues such as "machines stop during cleaning, leading to inefficiency," "difficulties in collecting and disposing of cutting fluid," "time and cost involved in tank cleaning," and "frequent breakdowns of electric vacuum cleaners." 【Product Lineup】 Circulation work without stopping the machine! Separates cutting fluid and chips! ■ Air-Powered Circulation Filtration Cleaner "J-F Series" - Separates cutting fluid and chips without stopping the machine - No risk of electric leakage during continuous operation - Easy disposal of chips - Filtration capacity of 60L/min < J-FS > Chip-specific SUS filter type Standard mesh < J-FF > Polishing-specific non-woven fabric filter type For aluminum, stainless steel, BC (CAC), resin, etc. Solving cleaning tasks in approximately 5 minutes! ■ Air-Powered Tank Cleaning Filtration Cleaner "APDQO Series" - High-speed cleaner - Can be washed thoroughly - Continuous operation is possible < APDQO-FS > Chip-specific SUS filter type < APDQO-FF > Polishing-specific non-woven fabric filter type

• pump

No electricity required, no hassle of oil refilling, and can be used in explosion-proof areas. Ideal for blowing, cooling, and ventilation in fire-restricted areas, as well as for heatstroke prevention! *Video available.

Until now, air motors have required oil lubrication, but this time we are equipped with the "latest oil-free air motor," which eliminates the hassle of oiling. Additionally, it can be used in explosion-proof areas, making it highly recommended for blowing, cooling, and ventilation in fire hazard zones, as well as for heatstroke prevention. <Recommended Points> 1. No need for lubricator oiling! Equipped with an oil-free motor 2. Quiet! Approximately 5% noise reduction 3. Energy-saving! Approximately 5% reduction in air consumption 4. Further price reduction of about 30% cost down *Comparison with our conventional products <Can be used as a circulator> Possible with approximately 90 degrees of vertical oscillation and about 70 degrees of horizontal oscillation. *We have a wide range of lineups available to suit various applications. For more details, please download the catalog or feel free to contact us!

• others

Transporting hardened oil is a breeze! Jacket heaters that fit perfectly around containers, etc.

We offer a variety of pumps and related products that are useful in the upcoming season when temperatures drop and oil becomes thick. We have products that help reduce frustration in liquid transfer during winter and in cold regions, such as the jacket heater "HTJ Series," which warms oil inside containers like pails, one-gallon cans, and drums to lower viscosity. 【Product Lineup】 - Air-driven pressure pumps - Electric high-viscosity oil pumps - Heat jackets for containers "HTJ Series"… and more *We are currently providing materials that introduce our products. Please feel free to contact us for inquiries.

• pump

Thank you very much for your continued patronage. We apologize for the inconvenience, but we will be closed during the following period. 【Closure Period】 From Wednesday, April 29, 2026, to Wednesday, May 6, 2026. Inquiries received during the closure period will be addressed sequentially starting from Thursday, May 7, 2026. We apologize for any inconvenience this may cause and appreciate your understanding. *Orders placed on various online shopping sites will still be accepted during the closure period. *Shipping of products and responses to inquiries will begin after Thursday, May 7, 2026.

At the entrance of a real estate company in Minato-ku, Tokyo, we have introduced the rental service "Majesta Fragrance" for commercial aroma diffusers, creating a fragrant atmosphere in the space. With the new start of the office relocation on April 1st, a high-quality and sophisticated scent suitable for this new beginning is spreading throughout the entrance. The "scent" that visitors first experience is one of the important elements that naturally conveys the company's impression and dignity. At Majesta Fragrance, we support the enhancement of corporate branding value through the production of scents tailored to the spatial concept. We also offer a free trial installation, so please experience the atmospheric effects that scent can bring. If you are interested in scent design, please feel free to contact us.

We will be exhibiting at the Thermal Tech 2026 event held at the Osaka Industrial Creation Center. At this exhibition, we will introduce our unique material technologies to engineers who face challenges in material selection for high-temperature environments, focusing on polyimide sheets suitable for high heat resistance and insulation applications. As attendance is by prior registration, please register through the related link before visiting, and we hope you will stop by our booth. We sincerely look forward to your visit. ◆ Our main exhibition content - PI Plates (Polyimide Laminates) - SUS/Polyimide Substrates ◆ Exhibition Details ◆ Exhibition Name: Thermal Tech 2026 (Pre-registration required) Pre-registration Method: Please register via the URL in the related link Date and Time: April 24, 2026 (Friday) 10:30 AM - 4:30 PM Venue: Osaka Industrial Creation Center, 3rd and 4th Floors (Reception on the 4th Floor)

From June 2025, measures against heat stroke in the workplace have become mandatory. Additionally, in December 2026, a "Support Package for Heat Wave Measures in Construction Work" was formulated, making heat stroke prevention during the summer a pressing issue, especially for those engaged in the construction industry. This time, we provide a collection of heat stroke prevention materials that can be utilized through Sysmet Co., Ltd.'s comprehensive weather platform, ZEROSAI X-AI. Examples of heat stroke prevention measures possible with ZEROSAI X-AI: - Cloud management of heat stroke information - Forecasting of the heat index (WBGT) tailored to the site with a mesh of 500m for up to 17 days ahead - Observation of the heat index (WBGT) in compliance with JIS standards using a black globe thermometer - Alerts for exceeding work standard values for the heat index (WBGT) via electronic bulletin boards, emails, and business chat tools like direct LINE WORKS We hope this will be useful at your sites as well.

Energy With Co., Ltd. (Headquarters: Chiyoda-ku, Tokyo, President: Yoshito Ishii, hereinafter referred to as Energy With) has acquired the naming rights for the Nabari City Youth Center located in Nabari City, Mie Prefecture, and began using the name "Energy With Hall" from April 1, 2026. Earlier this month, a new sign for Energy With was installed. About Energy With Hall Facility Overview Address: 1325-1 Matsuzakicho, Nabari City, Mie Prefecture, 518-0721 (Google Maps: https://maps.app.goo.gl/YLh6Dv6D91irLDx79) Phone Number: 0595-64-3478 Fax Number: 0595-64-8321 For more detailed facility information, please see below. Energy With Hall (Nabari City Youth Center (formerly ads Hall)) – Facility Information