A feature article has been published in "NEXCOM Express Japan Edition."

Dedicated rapid charger for lithium-ion batteries combined with a worldwide input AC adapter.

The "MQLi" series supports rapid charging of lithium-ion secondary batteries with 1 to 10 cells. Custom options beyond standard specifications are also available. Please feel free to contact us if you have any requests. 【Features】 ■ Charges at 4.1V per cell, considering battery lifespan. ■ Displays the status of the charger (charging, completed, error) with LEDs. ■ Includes a charging standby function that stops charging during low or high temperatures to ensure optimal charging. *1 ■ Detects if the battery is not connected. *1 ■ Customizable protection timer settings in four stages. ■ Four stages (180, 240, 300, 360 minutes). ■ Performs constant current charging at low voltage to minimize stress on lithium-ion batteries. ■ Detects voltage abnormalities in the battery and terminates with an error. ■ Resumes charging when it detects voltage drop due to natural discharge. It complies with RoHS directives. *1: When a thermistor is built into the battery pack. *For more details, please download the PDF from our website or contact us.

• others

High efficiency, low noise, and high output condensed into a compact size!

The "RC60M" is a compact and low-noise AC adapter. It features a circuit design that excels in standby power and operating average efficiency. The output capacity is up to approximately 60W, with output voltages available in three types: 12V, 16V, and 24V. 【Features】 ■ Made in Japan ■ Compliant with DoE (LEVEL VI) standards (U.S. Department of Energy) ■ Compliant with the European new energy regulation CoC-Tier2 ■ Ultra-compact size ■ Compliant with RoHS2 (10 substances) directive *For more details, please download the PDF or contact us.

• others

Resonant type, ultra-compact, low-noise adapter

The "RC120M" is a compact, high-efficiency current resonance type adapter with low noise characteristics. It complies with the European new energy regulation CoC-Tier2. The output capacity is up to approximately 120W, and standard output voltages are available at 12V, 16V, and 24V. Please feel free to contact us if you have any requests. 【Features】 ■ Input: AC90–264V ■ High reliability/low noise with large capacity and compact size (120W output in 364cc, 330W/liter) ■ Complies with harmonic current regulations ■ Ultra-compact size: Width 68mm × Depth 153mm × Height 35mm ■ Complies with the European new energy regulation CoC-Tier2 *For more details, please download the PDF or contact us.

• others

We are committed to domestic integrated production and provide high-quality power supplies tailored to our customers' specifications.

Futaba Electric is a domestic switching power supply manufacturer established in 1962. Since its founding, the company has been committed to domestic integrated production, practicing the design and development of high-performance power supplies that can be used safely and securely, as well as manufacturing and quality assurance. Our custom power supplies are tailored to our customers' industrial equipment and are produced and used for 5 to 10 years. Unlike standard power supplies, there are no sudden production discontinuations, and we continue to supply high-quality power supplies for as long as possible. The high-quality, long-lasting power supplies made by Futaba Electric are widely adopted in medical, communication, infrastructure, and industrial applications. For long-term, safe, and reliable power supply development, trust Futaba Electric. *For more details, please refer to the related links page or feel free to contact us.*

• Other Batteries

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK