Case Study: Miura City Hall, Kanagawa Prefecture - Introduction of "Ultra-Low Temperature Freezer Monitoring Solution" to Prevent Vaccine Waste ★ Monitoring of Freezer Temperature & Power Supply + Power Backup System (Note 1)

★Municipality Introduction Decision★ Monitoring temperature & power anomalies of deep freezers with emergency alerts! 【Contributing to the prevention of vaccine disposal accidents with up to 5 hours of cooling! ※1】

Have you completed risk management measures for potential issues such as human errors like incomplete door closures or unplugged power plugs, power outages due to lightning, or malfunctions of the cold storage itself, which can lead to "temperature increases inside the storage"? At ISA, we monitor cold storage units that hold important vaccines 24/7, 365 days a year with two solutions that monitor both temperature and power. For power management, we provide an uninterruptible power supply (UPS) that ensures power supply in case of emergencies like power outages. For temperature monitoring, we use a high-performance sensor for automatic measurement of the internal temperature. Our solutions are compatible with cold storage units from various manufacturers. Both systems alert and notify via email or warning lights in case of abnormalities, reducing the burden on administrators and enabling prompt and secure responses. **Benefits of System Implementation** - Reduced workload at vaccination sites, local governments, medical facilities, and management locations - Quick startup with wireless communication that requires no wiring, allowing immediate measures - Long battery life of 10 years for the sub-units (varies with transmission interval) - Thorough measures through simultaneous automatic monitoring of temperature and power - Capability to monitor from various locations (head office, etc.) through cloud integration - Strong communication stability even across floors and through obstacles like walls *For more details, please contact us.*

• Showcases (for general store use, freezing, refrigeration, heat retention, etc.)
• Security cameras and surveillance systems
• others

If the threshold is exceeded, email notifications and warning light alerts will be triggered, enabling efficient ventilation measures within the theater and helping to prevent sealing!

We would like to introduce a case study of the "Indoor Environment Monitoring Set" (high-performance CO2 concentration, temperature and humidity measurement sensors, gateway, and warning light) that has been implemented at Shinjuku K's Cinema (Location: Shinjuku, Tokyo). <Purpose of Implementation> To visualize the air and environmental conditions within the facility and to implement effective ventilation measures and prevent sealing. <Before Implementation> Ventilation measures such as limiting the number of visitors, using the air conditioning system, and bringing in outside air had been taken, but the difficulty of confirming sealing prevention measures visually was felt. <After Implementation> Measurement units (sub-devices) equipped with CO2 concentration and temperature and humidity sensors were placed in five locations where people are likely to gather, and the main unit was installed in the management room. Measurement data is sent to the cloud via the main unit, allowing for confirmation at any time using a PC or smartphone. In the event that the set threshold is exceeded, notifications via email or warning lights enable the implementation of effective ventilation measures, establishing a system for environmental management aimed at ensuring customer safety and security. <Implementation Effects> ■ Visualization of indoor environment (CO2 concentration, temperature, and humidity) ■ Efficient and accurate implementation of ventilation measures ■ Infection prevention through sealing prevention measures ■ Providing safety and security to customers

• Other commercial buildings and service facilities
• Other measuring instruments
• Other analytical equipment

[COVID-19 Measures + Ventilation Promotion] Indoor Environment (CO2 Concentration + Temperature and Humidity) Monitoring Set (Main Unit + Subunits)! Up to 32 subunits can be connected!

Monitoring carbon dioxide levels and linking them to ventilation efforts is very important. Knowing the timing for ventilation is essential for creating a comfortable indoor environment. ■ Indoor Environment (CO2 Concentration + Temperature and Humidity) Monitoring Set [For Educational Facilities × Ventilation Promotion] The set consists of a main unit + sub-units (with sensors). Up to 32 sub-units can be connected. - Main Unit (WD100-S32/N32) Data Collection Communication Control Server - Sub-Unit (WD100-THC) Temperature and Humidity/CO2 Measurement Unit (with sensor) [Usage Image] Install measurement sensors (sub-units) that do not require power in each classroom, and collect measurement data at the main unit in the staff room or management office. Since CO2 concentration and temperature and humidity data can be monitored remotely in bulk, measures to improve the indoor environment can be initiated immediately. By setting thresholds suitable for avoiding close contact and for the learning environment, you can determine the appropriate timing for ventilation!

• Other commercial buildings and service facilities
• Other measuring instruments
• Other analytical equipment

Measure indoor temperature, humidity, and CO2 concentration, and display it on a large LCD screen. Provide warnings in three colors of light at different levels and notify about ventilation via email or alerts!

The monitoring targets selected by the user from temperature, humidity, carbon dioxide (CO2) concentration, and WBGT (heat index) are displayed on a three-color LCD: green for "normal," yellow for "caution," and red for "warning - immediate ventilation required." For example, if "standard values" suitable for avoiding crowded places or ensuring a comfortable indoor environment are set in advance, the color will change as the status escalates, and the displayed measurement values will blink to provide a warning, along with email notifications. Temperature, humidity, and carbon dioxide (CO2) concentration are measured using high-precision sensors built into the measurement unit, and the measurement data is collected by the main unit. Up to 32 sub-units can be connected to one main unit, and the communication between the measurement unit and the main unit uses LoRa wireless communication, which is resistant to obstacles, energy-efficient, and capable of long-distance communication, covering areas where Wi-Fi or Bluetooth cannot reach, as well as obstacles, multiple floors, and distances. This makes it suitable for environmental monitoring in large factories, facilities, and buildings. ★ Measures and displays temperature, humidity, carbon dioxide (CO2) concentration, and WBGT (heat index) ★ Alert notifications via email and other means ★ Utilization of WBGT values for heatstroke prevention ★ Can be combined with contact input/output units for integration with ventilation systems

• Other commercial buildings and service facilities

Contributing to agriculture/FA/dining/HACCP! Easy installation with long-term operation! "Momoko and Ayaka," suitable for data collection and equipment monitoring control.

The WD100 series "Momoko and Ayaka" is a device that allows for the remote collection of environmental information and control of equipment using a wireless method based on LoRa technology. The system is composed of a measurement and control unit and a data collection communication control server. The measurement and control unit is available in various types according to the data and control requirements. It is designed to be waterproof (IP67) so that it can be installed in both indoor and outdoor environments. The data collection communication control server manages the communication of up to 32 measurement and control units, collects data, and performs monitoring and management. It can also be set up to monitor for abnormal values, allowing for notifications not only for abnormal data but also for communication issues, battery life, and more. Additionally, the system can be easily constructed, enabling quick integration with existing systems or cloud services. 【Features】 ■ Measurement units come pre-wired with sensors ■ Maintenance-free and long-lasting ■ Suitable for installation indoors and outdoors ■ Excellent monitoring and management functions ■ Capable of long-distance communication ■ Abundant external connections *For more details, please visit the external site or feel free to contact us.

• Monitoring and Control Equipment
• Other measuring instruments

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

The receiver section of the radio is designed to receive signals properly even when influenced by other radios used in the world, and standards have been established for this purpose, requiring designs that comply with these standards. This time, I will briefly discuss the wireless standards for the receiver section! 【Contents】 ■ Minimum reception sensitivity ■ Adjacent channel selectivity ■ Receiver intermodulation ■ Spurious response ■ Harmonic emission * For more details, please refer to the PDF document or feel free to contact us.

Nihon Jitsugyo Co., Ltd. will exhibit at the "7th Kansai Logistics Exhibition KANSAI LOGIX2026," which will be held from April 8 (Wednesday) to April 10 (Friday), 2026. On that day, we will showcase products that contribute to heatstroke prevention in warehouses and factories in preparation for the upcoming summer heat. You will be able to experience the actual products at our booth, so please stop by. 【Exhibition Overview】 Exhibition Name: 7th Kansai Logistics Exhibition KANSAI LOGIX2026 Dates: April 8 (Wednesday) to April 10 (Friday), 2026 Venue: Intex Osaka Booth Number: C2-02 【Exhibited Products】 - COOL FAN SPOT mini Hieppi - COOL FAN Series - ECO FAN Series *There will also be new products making their debut at the exhibition!