Thank you for visiting the secondary battery exhibition.

Regarding the particle dispersion method for slurry, we propose the solid kneading method → CDM process (patented) [related video available].

We propose a CDM process using our Filmix® as a method for manufacturing electrode slurries for lithium-ion batteries. Compared to conventional solid kneading methods, it offers the following advantages: - Short processing time - High dispersion capability - High reproducibility - Easy scale-up for mass production ■ Solid Kneading Method Process We use kneading machines such as Hibis Dispermix. The typical process involves adding all powder raw materials → gradually adding liquid raw materials → kneading until it reaches a crumbly to ball-like consistency → further adding liquid raw materials gradually for dilution → performing viscosity adjustment and degassing. <Problems with the Solid Kneading Method> - Maximum scale is around 1,000L - Takes 5 to 10 hours per batch - Low reproducibility ■ CDM Process In the CDM process, we reduce the 5 to 10 hours of the above kneading process by adding liquid and powder raw materials all at once, creating a slurry that can be pumped after about 30 minutes of pre-mixing → then using Filmix® to continuously process the entire amount in 30 minutes. <Effects of the CDM Process> 1) Processing capacity of up to 1,920L/H 2) Fewer man-hours lead to higher reproducibility 3) Reduction in the number of workers required 4) Decrease in the number of devices and installation area needed

• others

Continuous manufacturing process and equipment for electrode slurry using Filmix® developed for dispersing electrode materials of lithium-ion batteries and fuel cells.

CDM stands for Continuous Dispersion Mixing, which is a continuous manufacturing process for electrode slurries using Filmix® developed for the dispersion applications of electrode materials in lithium-ion batteries and fuel cells. The nanoparticle design mixer (dispersion stirring device) Filmix® 56-L type is compatible with both batch and continuous processes. It can also be used by setting up a continuous line on a tabletop. ▼▼ Basic Procedure for Continuous Operation ▼▼ 1) Preliminary dispersion with a homodisperse or similar device 2) Transfer of the processing liquid with a pump 3) Dispersion with Filmix® ■ This single unit can be compactly used from research and development to small-scale production! ■ There are numerous successful scale-up cases from research machines to production machines! ◆◇━━━━━━━━━━ 　　Testing Now Available! ━━━━━━━━━━━◇◆ If you have materials that are problematic for dispersion or homogenization, please give it a try. We are currently offering two booklets related to battery manufacturing as a gift. 　◎ "Battery Device Measures Booklet"　　 　◎ "Booklet on Fuel Cell MEA Manufacturing" * If you would like to request a test or booklets, please feel free to contact us.

• others

This is a stirring device that achieves sharp particle size distribution and nanoparticle production through a unique stirring principle called the thin film rotation method developed by Primix!

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult to achieve with conventional high-speed stirrers. Emulsification and dispersion in seconds significantly shorten research and development time. The 56-L model can operate in both batch and continuous modes on a tabletop. Once the conditions are established in batch mode, continuous experiments can be conducted by setting up a line. This single unit can be used compactly for everything from research and development to small-scale production! ◆◇◆ Testing Now Available! ◆◇◆ If you would like to request a test, please feel free to contact us.

• others

[Video available] Supports ultra-high viscosity! This is a laboratory mixer of a composite type stirrer that performs high-speed stirring while mixing. There are many successful scale-ups from research machines to production machines!

The Hibis Dispermix is a dispersing, mixing, and kneading machine that can perform kneading and high-speed stirring simultaneously. It is suitable for uniformly dispersing and mixing large amounts of powder with small amounts of liquid. This single unit can handle materials ranging from low to high viscosity. It has numerous delivery records in various applications, including chemical products such as metal pastes and slurries for lithium-ion battery electrodes, as well as pharmaceuticals, dental materials, and food products. The Type 3D-2 is a benchtop research machine designed for processing 2 liters. When making lithium-ion batteries... many users start their research and development with this Hibis Dispermix.

• others

[Video available] An ultra-high-speed multi-stirring system with a maximum rotation speed of 22,000 r/min! This is an emulsification and dispersion testing machine that can accommodate vacuum, continuous, and batch types.

Here are the appealing points of using the de facto standard emulsification and dispersion testing machine, Lab Solution(R), which consolidates evolution! ▼ ▼ ▼ ○ There are plenty of stirring options that can be easily swapped, making it easy to try various configurations during the initial investigation phase. ○ You can select the appropriate model based on the stirring purpose and the processing liquid. ○ The increased motor power allows you to confirm the load condition, providing peace of mind when increasing the rotation speed. Materials that were previously overloaded can be retested. ○ The temperature sensor is standard equipment, and the temperature is displayed on the operation panel, making it more convenient than testing with a separate thermometer.

• others

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector. On June 4, 2026, we published a page titled "Do We Set 'Forecasts' Too Optimistically Compared to Reality? The 'Planning Fallacy'." The 'Planning Fallacy' refers to the psychological phenomenon of underestimating the time, costs, and risks involved in carrying out tasks while overestimating the benefits. The page explains examples of its occurrence, the factors that lead to it, and methods to overcome it. (Page Overview: Excerpts) ■ What is the 'Planning Fallacy'? ■ Examples of the 'Planning Fallacy' ■ Why does the 'Planning Fallacy' occur? ■ How to overcome the 'Planning Fallacy'? (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/planning-fallacy-2026-06/

Kort Valuta has released a workplace initiative model that leverages points exchangeable for electronic money to support the adoption of safety and wellness habits. Examples include: ・Hydration reporting ・Viewing heatstroke prevention content ・Pre-shift condition checks ・Voice-based condition checks By linking these activities to incentive points, organizations can encourage voluntary participation while supporting workplace safety and employee well-being. The model is designed not only for frontline environments such as: ・Logistics ・Construction ・Manufacturing but also for office-based health and well-being programs. Safety posters and reminders alone are often not enough to drive lasting behavioral change. We hope this initiative provides a practical example for organizations seeking new approaches to workplace safety and employee engagement. Read the full press release: https://prtimes.jp/main/html/rd/p/000000118.000076589.html #HeatstrokePrevention #WorkplaceSafety #EmployeeWellbeing #HealthManagement #OccupationalHealth #HR #Logistics #Construction #Manufacturing #TwooCa

Our company will be presenting at the "On-Site Made Easy! Latest Technology Seminar Vol. 20" (organized by Shinken Shimbunsha)! Kinos Logic will be speaking in Session 3 (15:50 - 17:00). We will provide a clear explanation of the tool "Seigou Navi," which can streamline the review of civil engineering drawings on a PC, using real-life examples. ■ Event Overview Date and Time: June 30, 2026 (Friday) 13:00 - 17:00 *Entry starts at 12:30 Format: Zoom (online broadcast) Capacity: 300 participants for the Zoom live broadcast Participation Fee: Free (Note: Additional fees for continuing education unit application services, etc.) Application Deadline: June 26 (Friday) 17:00 Organizer: Shinken Shimbunsha