Imagine robot polishing that suits your company with application example videos from FerRobotics! We are uploading a wealth of application example videos for robot polishing on the official FerRobotics YouTube channel. Solve management challenges with automatic polishing using high-speed automatic pressure correction!

Automating polishing and sanding processes that require uniform pressure with a constant applied force dramatically improves finish quality and cycle time.

Orbital polishing kit using the unique ACT technology developed by FerRobotics Compliant Robot Technology GmbH. ACT automatically corrects the "difference" in contact pressure (force) that occurs during processing in polishing and grinding operations, which require skilled techniques, in relation to dimensional tolerances, curved shapes, and non-flat surfaces, at high speed. It also automatically corrects for gravitational load, allowing for consistent polishing/grinding operations at the set pressing force. This technology can increase the speed of the device or robot's trajectory, thereby enhancing processing speed and improving cycle time. Additionally, in robotic polishing and grinding, the control of pressing pressure is achieved through the expansion and contraction of the ACF itself, eliminating the need to move the heavy robot arm for corrections, which further assists in improving the processing speed of robotic polishing. Moreover, it automatically corrects tool load due to gravity, which varies with the robot's angle, ensuring a consistent pressing pressure from any angle and enabling a finish without processing unevenness. Seeing is believing! Please check our website or YouTube (FerRobotics) for example application videos.

• Specially equipped vehicles

Automation of the artisan's skills (polishing, grinding) and hazardous tasks, which have been given up until now, through high-speed autonomous control with contact force control. Dramatic improvements are expected in the end effector.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during polishing and grinding processes, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force without being affected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it instantly adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by rapidly and automatically correcting through the expansion and contraction of the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed at which devices and robots move along their trajectories, thereby enhancing processing speed and improving cycle times. Additionally, in robotic polishing and grinding, the ACF itself controls the contact pressure through the expansion and contraction of its stroke, eliminating the need to move the heavy robotic arm for corrections, which further assists in improving the processing speed of robotic polishing. Furthermore, since it automatically corrects the tool load affected by gravity changes due to the robot's angle, it maintains a consistent contact pressure from any angle, enabling a finish without processing inconsistencies.

• container

FerRobotics creates a new standard in polishing automation! Complete automation of the polishing of the roof joint area of automotive bodies with pressure correction control.

Complete control of pressing force with our high-speed automatic correction end effector using ACT technology. Users share their success stories in the video. A picture is worth a thousand words! Please check our website or YouTube (FerRobotics) for application example videos. The complete automation of grinder finishing after welding/brazing at the roof joint of automobiles significantly improves finishing quality! It also greatly contributes to labor savings! The most important factor for high-quality post-processing is fine and smooth grinding. The better the polishing finish, the higher the quality of the finish, perfectly matching the demands for high-end products. Full automation with ASK enables the highest quality and best finish. ■ Benefits: - High-speed autonomous correction control of pressing force increases the robot's trajectory speed, dramatically improving productivity and cycle time for grinding and brushing. - Maintains a high level of quality, allowing for 24/7 grinding. - High-speed autonomous correction control of pressing force reduces the consumption of consumables, leading to cost savings. - Avoids the risk of vibration-related issues due to automation. - High ROI (return on investment) allows for early recovery of capital investment.

• Elevator

The official YouTube of Far Robotics has uploaded a wealth of videos showcasing various robot polishing applications. Automatic polishing with high-speed automatic pressure correction solves management challenges.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during processing in polishing and grinding, which require skilled techniques, in relation to dimensional tolerances, curved shapes, and non-flat surfaces, at high speed. It also automatically compensates for gravitational loads, allowing for consistent polishing/grinding with a set contact force. End effectors equipped with this technology solve management challenges. This technology can increase the speed at which machines and robots move along their trajectories, thereby enhancing processing speed and improving cycle times. Additionally, in robotic polishing and grinding, the control of contact pressure is achieved through the expansion and contraction of the ACF itself, eliminating the need to move the heavy robotic arm for adjustments, which further assists in improving processing speed. Furthermore, it automatically compensates for tool loads affected by gravity, which varies with the robot's angle, ensuring a consistent contact pressure from any angle and enabling a finish without processing inconsistencies. Seeing is believing! Please check our website or YouTube (FerRobotics) for application example videos.

• Specially equipped vehicles

FerRobotics creates a new standard for polishing automation! Significant reduction in consumable costs through polishing automation in automotive factories.

Complete control of pressing force through high-speed automatic correction using our technology ACT. A picture is worth a thousand words! Please check our website or YouTube (FerRobotics) for example application videos. The finishing polishing after welding/brazing of automotive roof joint parts is fully automated, significantly improving finishing quality!! It also greatly contributes to labor savings!! The most important factor for high-quality post-processing is fine and smooth grinding. The better the polishing finish, the higher the quality of the finish, making it a perfect match for high-end product demands. Full automation by ASK enables the highest quality and best finish. ■ Benefits: - The high-speed autonomous correction control of pressing force increases the robot's trajectory speed, resulting in dramatic improvements in productivity and cycle time for polishing and brushing. - Maintains a high level of quality, allowing for polishing 24 hours a day, 365 days a year. - The high-speed autonomous correction control of pressing force reduces the consumption of consumables, leading to cost savings. - Avoids the risk of vibration-related issues due to automation. - High ROI (Return on Investment) allows for early recovery of capital investment.

• Specially equipped vehicles

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

Hotron's vehicle detection sensors allow you to search for products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles and notify you with a rotating light, or switch the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at CTC First Contact, Inc. ~In the case of CTC First Contact~ To prevent situations where one might wonder "I thought I submitted it" or "Where are the documents?", they considered systematization. They were also managing payments to business partners using Excel, but there was a challenge to reduce and improve that workload. After the introduction, the integration with the transfer search significantly reduced the workload. They were able to change the payment site, which was impossible with paper operations. [Case Overview] ■Challenges before implementation - Uncertainty about the location of application documents ■Key points of implementation - Can be operated at a low cost - Flexible customization of settings *For more details, please refer to the related links or feel free to contact us.

Under the floor and in the attic... "Invisible spaces" are being reconsidered now The environment surrounding the housing industry has changed significantly in recent years. Rising timber prices, increased costs of equipment, a shortage of skilled workers, and prolonged delivery times are not temporary changes but are becoming entrenched as structural changes in the entire housing industry. Furthermore, in recent years, the global surge in resource prices, the depreciation of the yen, and rising logistics costs have compounded the situation, leading to a generally unstable environment for housing-related materials. What was once taken for granted—that "necessary materials can be obtained immediately when needed"—is no longer a given. Additionally, the construction and equipment industries continue to face a serious labor shortage. In particular, the aging of veteran craftsmen who support the field is progressing year by year, while securing young talent is not easy. As a result, situations such as difficulty in scheduling construction dates, longer waiting periods until construction, and limited availability of contractors in certain regions are increasingly common nationwide. In the housing industry, there is a growing sentiment that "construction plans cannot be made with the same sense as before," whether for new builds or renovations, which is becoming the norm across the country. For more details, please be sure to read the 【related materials】【related links】 below. ↓ ↓ ↓

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.