A must-see for those who have failed in automation polishing in the past! Challenge yourself with FerRobotics' high-speed autonomous correction technology for contact force! High-speed autonomous correction of contact force improves processing quality and enables increased robot trajectory speed. It autonomously corrects gravitational loads and controls processing from any direction with uniform force, achieving high-quality and stable automatic polishing.

We will not leave 3K jobs to the next generation of children. We will solve the shortage of skilled workers. Robot polishing that gives robots human-like senses through high-speed autonomous correction control of contact force.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) generated during polishing and grinding processes, which require skilled techniques, at high speed. This technology enables consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. Using an end effector (ACF) with ACT technology, the system rapidly and automatically adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by instantly extending and retracting the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed of the device or robot's trajectory, thereby enhancing processing speed and improving cycle time. Additionally, in robotic polishing and grinding, the control of contact pressure through the extension and retraction of the ACF itself eliminates the need to move the heavy robot arm for corrections, further assisting in improving processing speed. Moreover, since it automatically corrects the tool load affected by gravity changes due to the robot's angle, it consistently maintains uniform contact pressure from any angle, enabling a finish without processing inconsistencies.

• Outdoor stairs

An end effector that enables automation systems for high-speed processing and high-quality finishing, allowing for the craftsmanship techniques (polishing, grinding) and hazardous tasks that have been given up until now.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during polishing and grinding processes, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it quickly and automatically adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by rapidly extending and retracting the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed of the equipment and robots' trajectories, thereby enhancing processing speed and improving cycle times. Additionally, in robotic polishing and grinding, the ACF controls the contact pressure through the extension and retraction of its stroke, eliminating the need to move the heavy robot arm for corrections, which further assists in improving the processing speed of robotic polishing. Moreover, since it automatically corrects tool load variations caused by gravity changes due to the robot's angle, it consistently maintains uniform contact pressure from any angle, enabling a finish without processing inconsistencies.

• Specially equipped vehicles

Automation of the artisan's skills (polishing, grinding) and hazardous tasks, which have been given up until now, through high-speed autonomous control with contact force control. Dramatic improvements are expected in the end effector.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during polishing and grinding processes, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force without being affected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it instantly adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by rapidly and automatically correcting through the expansion and contraction of the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed at which devices and robots move along their trajectories, thereby enhancing processing speed and improving cycle times. Additionally, in robotic polishing and grinding, the ACF itself controls the contact pressure through the expansion and contraction of its stroke, eliminating the need to move the heavy robotic arm for corrections, which further assists in improving the processing speed of robotic polishing. Furthermore, since it automatically corrects the tool load affected by gravity changes due to the robot's angle, it maintains a consistent contact pressure from any angle, enabling a finish without processing inconsistencies.

• container

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

We will be exhibiting at the "Osaka Industry Exhibition 2026" held at MyDome Osaka from October 14 (Wednesday) to 15 (Thursday), 2026. We will introduce our stress check, health management system, reservation and reception system, and interview system.

We have published the latest issue (Issue 94) of the ISO-related information magazine "Intertek News." Intertek News delivers information and various topics related to ISO audits, certifications, and verifications. The feature of this issue is titled "Understanding Standard Revisions," where we introduce key points of management system standard requirements that new personnel should first understand in preparation for standard revisions. Additionally, we have included customer case studies, contributions from auditors, and information on certifications and standards, as well as the latest topics, so please take a look.

In recent years, while the size of residential spaces has been shrinking, there has been a growing demand from architects and designers for designs that "reduce lines as much as possible." However, designing spaces to appear clean and spacious by making door heights reach the ceiling or by minimizing the visibility of frames has posed challenges that require high skill levels from carpenters and significant construction time when attempted with conventional on-site construction methods. Against this backdrop, this year's Dretas has developed doors and storage fixtures that do not reveal frames, with the concept of "creating a noise-free space with empty space." ■ Base Frame (Fixtures) The structure hides the frame within the wall, achieving a refined design without the frame being visible from either side. It features a specially designed frame and concealed hinges that allow for 180-degree opening and closing. Frame widths (132mm, 147mm, 183mm) are set to accommodate wall thickness, eliminating the need for frame processing and supporting smooth installation. ■ Outset Frame (Storage Fixtures) The structure has the frame attached to the inside of the door, allowing the door and wall to fit flatly together. It can be configured for two or three panels, seamlessly blending even large wall storage into the space as if it were "just a wall." By using additional elements like the 3mm thick "Baseboard S-type," the installation becomes even more beautiful, enhancing the noise-free space.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.