Wireless power transmission demo unit <Power supply and communication to sensors on a rotating body achieved>

Sensors can be replaced with various types! They can be applied to equipment condition monitoring devices and more.

We would like to introduce our "Wireless Power Transmission Demo Unit." A brightness sensor, temperature sensor, and receiving circuit are installed on a rotating table, allowing for wireless power transmission from the power transmission circuit to the receiving circuit. The power transmission circuit collects sensor information simultaneously with wireless power transmission. The sensors can be replaced with various types, making it possible to install them in locations where it was previously not feasible. 【Features】 ■ Brightness sensor, temperature sensor, and receiving circuit installed on a rotating table ■ Wireless power transmission from the power transmission circuit to the receiving circuit ■ Activation of each sensor connected to the receiving circuit ■ The power transmission circuit collects sensor information simultaneously with wireless power transmission ■ Monitor sensor information on a PC *For more details, please refer to the PDF document or feel free to contact us.

• others

Wireless power transmission is possible in enclosed spaces! The receiving circuit can be individually recognized by ID.

We would like to introduce our "Wireless Power Transfer Demo Unit." The receiving circuit is installed underwater, and wireless power is transmitted through glass from the power transmission circuit to the receiving circuit. The power transmission circuit collects sensor information simultaneously with wireless power transfer. This can be applied to monitor the vacuum level in a vacuum chamber, as well as the temperature inside a constant temperature bath. 【Features】 ■ Receiving circuit installed underwater ■ Wireless power transfer through glass from the power transmission circuit to the receiving circuit ■ Water temperature measured with a temperature sensor mounted on the receiving circuit ■ Power transmission circuit collects sensor information simultaneously with wireless power transfer ■ Monitored temperature displayed on a PC ■ Receiving circuit can be individually recognized by ID *For more details, please refer to the PDF document or feel free to contact us.

• others

Up to 50W output is possible! It can be used for practical evaluations incorporated into your company's products.

We would like to introduce our "High-Frequency Power Board." Using our wireless power evaluation high-frequency power board and reference antenna, you can confirm the operation of wireless power transmission. The high-frequency power board can output up to 50W, and with the reference antenna, it can operate with a load of up to 35W at a power transmission distance of 40mm. We can accommodate custom antenna designs according to your needs, so please feel free to contact us when you require assistance. 【Features】 ■ Uses our wireless power evaluation high-frequency power board and reference antenna ■ High-frequency power board can output up to 50W ■ Reference antenna can operate with a load of up to 35W at a power transmission distance of 40mm ■ Operates LED tape (12V) and fan (5V) as loads ■ The output start switch allows you to toggle the LED and fan On/Off by waving your hand *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

Wireless power transfer technology selected for the "Kansai Manufacturing Selection 2018" by the Kinki Bureau of Economy, Trade and Industry.

"Wireless power transfer," also known as wireless power transmission, non-contact power transmission, and Wireless Power Transfer (WPT), is a technology that has recently gained attention as a method for supplying power to wireless terminals of IoT devices using advanced technology. Our wireless power transfer utilizes a magnetic resonance method, which features long transmission distances and high efficiency. To actually perform power transmission, it is necessary to combine various technologies in addition to antenna design. Therefore, we will propose solutions tailored to our customers' needs, starting with contract design. [Features] - Design of suitable coils tailored to application devices - Maximization of transmission efficiency at the desired transmission distance - Evaluation of transmission efficiency and output power of the wireless power transfer section - Adjustment of magnetic resonance to enhance transmission efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Measurement and Inspection
• Power and Energy Equipment

For wireless power transfer design outsourcing, go to WTI!

This technology enables wireless power supply for electronic devices, allowing for high-efficiency power delivery even at a distance. The transmission distance of the electromagnetic induction method, commonly used in wireless power transfer, is generally about 1 cm. However, with our magnetic resonance method, power transmission is possible over distances of several tens of centimeters. Additionally, our unique coil design based on our patented technology allows for more efficient power transmission and a wide range of compatibility for highly customizable wireless power devices. 【Service Overview】 ■ Contract design service for wireless power supply coils ■ Contract evaluation service for magnetic resonance wireless power transfer *For more details, please download the PDF or feel free to contact us.

• others

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI