ECU inspection device, ECU writing device

A controller essential for ECU board inspection.

It is possible to send commands to the onboard ECU board using LIN-CAN communication.

• Non-destructive testing

PLC-integrated fixture that does not require standard inspection equipment's I/O control box, etc.

From simple jigs with only OK/NG lamps to jigs using touch panels, they can be used anywhere as long as there is power and air.

• Non-destructive testing

Inspection jigs used in standard testing equipment.

It has a built-in 60-pin connector (I/O, measurement pins) and a 6-pin connector (power supply), which can be assigned according to the inspection requirements. High-speed LED lighting inspection using a camera is also possible, with sequential lighting inspection in as short as 3ms.

• Non-destructive testing

Final inspection device for leveling function.

A mechanism that uses weights for measurement and applies the same load in the forward and depth directions.

• Non-destructive testing

Swivel function inspection device

Rotation inspection for swivel function.

• Non-destructive testing

Lighting fixture function inspection device.

Conducted axis expansion and contraction inspection, and noise inspection.

• Non-destructive testing

Inline large inspection device.

It is possible to build a fully automated line.

• Non-destructive testing

Fully automated line for inspecting multiple circuit boards before separation.

Perform ROM writing and function testing on multiple circuit boards (up to 8) before separation. The boards are conveyed on a conveyor for inspection at each stage. Capable of accommodating circuit boards of various sizes.

• Non-destructive testing

Software development applications suitable for measurement control and data analysis.

The inspection software was developed using LabView, which is primarily used in the inspection equipment. For customers without a license, it can also be provided in exe format.

• Non-destructive testing

Are you making progress on measures for the "2024 Problem"? The management of drivers' working hours is becoming stricter, and in the logistics field, reducing "waiting time for loading" has become an urgent issue. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability status, reducing unnecessary waiting and queuing, and shortening waiting times, thereby alleviating the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start taking measures against the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult us first.

We sincerely apologize for the inconvenience, but we will be closed for summer vacation during the following period. Closure period: August 9 (Saturday) to August 17 (Sunday), 2025 Inquiries received during this period will be addressed sequentially starting from August 18 (Monday). We appreciate your understanding and cooperation.

Thank you very much for visiting our booth at the "High-Performance Materials Week [Osaka] 13th High-Performance Plastics Exhibition." Thanks to you, we had many visitors and were able to conclude the event successfully. In addition to the "PPLB-445" displayed on the day, we have a variety of products available. For those who were unable to measure samples at the venue, we offer a trial measurement service. Furthermore, for those who would like to know more about our products and services, we also accept online meetings. We welcome inquiries from those who attended as well as those who could not make it this time due to scheduling conflicts. Please feel free to contact us.

Aioi System is pleased to announce the release of the low-power wireless display "NW2991-JP," which achieves long battery life. This product supports 920MHz band wireless communication and can be operated in conjunction with wired displays. It can be easily integrated into existing systems by simply adding a master unit. With a high-speed response time of under one second and a variety of display functions for text and barcodes, it supports a wide range of applications. ▼ For more details, please see the press release linked below ▼ ■ Main Features - Maintenance-free design with a battery life of one year (low power consumption) - Compatible with mixed operation with wired displays - High-speed response (under one second) and diverse display formats - Stable communication in the 920MHz band ■ You can see the actual product at the exhibition This product will be displayed at the TOPPAN booth during the International Logistics Comprehensive Exhibition 2025, 4th INNOVATION EXPO. We invite you to visit the venue, see the actual product, and experience its performance. Dates: September 10 (Wed) - 12 (Fri), 2025 Venue: Tokyo Big Sight (Halls 4-8) Booth No: 5-907 (TOPPAN booth) Exhibition official website ▶ linked below We sincerely look forward to your visit.

Thank you very much for visiting our booth at the "Monozukuri World (Measurement, Inspection, and Sensor Exhibition) 2025." Thanks to you, we had many visitors, and the event concluded successfully. In addition to the "PPLB-445" showcased on the day, we have a variety of products available. For those who were unable to conduct sample measurements at the venue, we offer a trial measurement service. Furthermore, for those who would like to learn more about our products and services, we also accept online meetings. We welcome inquiries from those who attended, as well as those who were unable to come this time due to scheduling conflicts. Please feel free to reach out to us.