(Free) Instron WEB Seminar Series: Static Testing Machine Series: Universal Material Testing Machines and Testing Methods for Medical Devices

Achieves high safety without compromising testing capacity! Supports various tensile, compression, and bending tests from low capacity (500N) to high capacity (300kN).

The "6800 Series" is a universal material testing machine designed to enhance safety levels more than ever before, protecting operators, testing machines, and test specimens without placing a burden on testing processing capabilities. The lineup has been further enriched with the addition of high-capacity (100kN, 300kN) floor-mounted models! 【Safety Enhancement Features】 ■ Operator Protection ■ Test Status Display via Indicator ■ Smart Close Air Circuit 【Advanced Testing Functions】 ■ Synchronized Data Sampling at Speeds up to 5kHz ■ Latest Handset ■ Latest Features Linked with Dedicated Software Bluehill Universal 【Customizability】 ■ Wide Range of Accessories ■ Custom Frames (Width and Height Extensions) *Please feel free to contact us for more details.

• Other measuring instruments

Introduction of application examples for material testing of surgical products.

Instron is a leading global supplier of mechanical testing systems suitable for tensile, compression, bending, peeling, tearing, friction, torsion, and fatigue tests. Hospital and surgical products are often consumables designed for single use by patients. Catheters, guidewires, venous lines, tubes, and wound closure products such as bandages, sutures, and staples all fall into this category. Mechanical testing of these products is particularly important to ensure that characteristics such as appropriate tensile strength, low friction, and sufficient elongation are suitable for their intended use. 【Features】 ■ Reliability ■ Expertise ■ FDA Compliance ■ Space-saving Design *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

We provide a fixture package to test all 10 items of ISO11040-4!

Pre-filled syringes are generally tested according to ISO 11040-4. Glass syringes are more susceptible to breakage than plastic syringes, so a wider variety of tests are required based on ISO 11040-4. There are a total of 10 annexes within ISO 11040-4, each requiring different testing methods. Some of the annexes require rotational motion, so the "ISO 11040-4 fixture" is designed to be compatible with simple tensile, compression, and Torsion Add-On (twisting additional option) systems. [Strengths of Instron Testing Machines (Partial)] ■ The fixtures are designed to conduct various tests with minimal fixtures. ■ The fixtures adopt a modular design to minimize the number of necessary parts. ■ Instron's service department supports the introduction of testing machines. ■ Reduces operator training time. *For more details, please refer to the PDF document or feel free to contact us.

• others

Provides traceability for inconsistent data! Compatible with new and existing systems.

We would like to introduce the traceability feature of our software, "Bluehill Universal." This feature allows users to meet the audit requirements related to FDA 21 CFR Part 11, ISO 17025, Nadcap, A2LA, and other certification texts. By incorporating electronic signatures and approvals, file revision history, and automated secure audit trails, this powerful additional feature provides traceability for non-conforming data. 【Traceability Features】 ■ Bluehill Security ■ Revision History ■ Electronic Signatures ■ Audit Trails *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

Introducing application examples of material testing for parts and components of medical products, as well as final products.

Instron is a leading global supplier of mechanical testing systems suitable for tensile, compression, bending, peeling, tearing, friction, torsion, and fatigue tests. In many cases, mechanical testing of pharmaceutical products consists of tests for pill crushing, hard and flexible package testing, syringes, auto-injectors, and vials, as well as testing of drug delivery systems such as inhalers and transdermal patches. Mechanical testing of these products is particularly important to ensure characteristics such as appropriate dosage, drug delivery time, package integrity, and safety requirements of the package, such as child-proof opening mechanisms. 【Features】 ■ Reliability ■ Expertise ■ FDA Compliance ■ Space-saving Design *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

It is a testing machine with a space-saving design that allows for the simulation of the twisting characteristics of products in real-use environments, thereby reducing the time required for product development.

The latest Torsion Add-On 3.0 is designed to enhance laboratory capabilities by allowing simple axial and torsion tests to be conducted with a single unit, as an option for the desktop models of the 6800 series and 5900 series. It expands product development capabilities and can simulate applications under actual use conditions. Many international testing standards, such as ISO11040-4, ISO80369, and ASTM F543, require control in both axial and torsional directions, making it possible to consolidate the necessary functions into one unit and streamline the testing process. It is ideal for testing the performance of various consumer products, packaging products, medical products, electronic devices, and automotive parts. ◆Features Simulates the product's actual use environment Enhances product development speed Saves laboratory space

• Other measuring instruments

【Exhibition Information】 Exhibition Name: Food Processing Technology Exhibition 2025 Date and Time: November 14, 2025 (Friday) 10:30 AM - 4:30 PM *Free entry and exit, pre-registration required Location: Osaka Industry Creation Center - We will showcase technical products using the factory deodorant "Deofure." - We will display the tofu defoamer "Tofu Up." - Other fragrance technology products will also be exhibited. *For more details, please refer to the materials.

Protech Engineering will exhibit at the "Landslide Disaster Prevention Technology Forum '25 in Toyama," organized by the Japan Society for Slope Disaster Prevention Technology, scheduled to be held on Thursday, October 9, 2025. On that day, we will provide detailed explanations of the following disaster prevention products using models, panels, and various materials. ◆Exhibited Products◆ - Pile-type debris flow and driftwood countermeasures for non-flowing streams / Urban Guard (model display) Additionally, our representative will conduct a technical presentation, so we kindly invite you to attend.

Protech Engineering (Booth Number: 240) will be exhibiting at the "Hokkaido Construction Development Comprehensive Exhibition 2025," scheduled to be held on October 8 (Wednesday) and 9 (Thursday), 2025. On the day of the event, we will provide detailed explanations of the following disaster prevention products using models, panels, and various materials. ◆ Main Exhibited Products ◆ - Energy-absorbing rockfall protection fence / ARC Fence (model display) - Landslide debris protection fence / Slope Guard Fence Type LE (model display) - Pile-type (pile foundation) debris flow and driftwood countermeasure for non-flowing streams / Urban Guard - Avalanche prevention piles / Tri-Pile - Avalanche protection fence / Slope Guard Fence Type LS - High energy-absorbing rockfall protection fence / Macro Fence In addition, we will have a variety of materials on disaster prevention products developed independently by Protech Engineering, so we kindly invite you to visit our booth.

Profect Co., Ltd. will hold a seminar on October 3rd (Friday) themed around the IT Implementation Subsidy 2025 and our developed and sold production management system "TED." This year's IT Implementation Subsidy has seen a significant decrease in the acceptance rate compared to previous years. Many companies are struggling with the situation of having wanted to implement IT tools but being rejected. In this seminar, we will explain why the acceptance rate has dropped, the background behind it, and the key points for being accepted. Additionally, we will introduce our initiatives that have achieved a 100% acceptance rate so far this year and the reasons why our production management system "TED," registered as an IT tool, is chosen. To accommodate busy schedules, this seminar will be held in a hybrid format, allowing for both in-person attendance and online participation via Zoom. Please choose your preferred method of participation according to your convenience. If you are currently considering applying for the IT Implementation Subsidy or are interested in production management, we encourage you to join us. We sincerely look forward to your application.

An international forum aimed at promoting the circular economy and closed-loop economy, "Closed Loop Recycle Forum 2025 (hereinafter referred to as CLRF2025)," will be held for two days from November 25 (Tuesday) to 26 (Wednesday) at The Oriental Terrace in Chuo Ward, Hamamatsu City, Shizuoka Prefecture. In Europe, closed-loop recycling practices are already advancing. We have organized this international forum as a platform to connect the forefront of Europe with Japan's challenges, striving for a future that balances economic viability and environmental sustainability. A total of 12 speakers, including Chairman Kajiwara of the Waste and 3R Research Foundation and Director Kaneko of the Ministry of the Environment's Container and Packaging Recycling Division, along with leading recycling operators and researchers from Japan and Europe, will present advanced examples of the circular economy and closed-loop economy. Furthermore, through discussions on the feasibility and challenges of implementation in Japan, we will explore hints for sustainable business models that companies and local governments should aim for.