We have published materials regarding the use of subsidies limited to public facilities.

A large-capacity, compact industrial energy storage system <BLP> that corresponds to the operation of the energy storage system defined in the resilience ZEB demonstration project.

A large-capacity, compact industrial storage system that corresponds to the operation of the storage system defined in the resilience ZEB demonstration project. ■ It is expected that the introduction costs can be reduced with subsidies limited to public facilities. A project to promote the introduction of autonomous and decentralized energy facilities, etc., that simultaneously realizes regional resilience and decarbonization for evacuation facilities and others. Support for the introduction of renewable energy generation and storage systems to public facilities (evacuation facilities, disaster prevention bases, etc.) positioned as evacuation facilities during disasters. If introduced through a system that incurs no initial costs, priority selection is given, with subsidy rates of one-third for prefectures, ordinance-designated cities, and specified cities, one-half for municipalities' solar power generation and cogeneration systems, and two-thirds for remote islands. (Source: Ministry of the Environment website) ■ Features and Strengths ● Compatibility with PV Thanks to the pseudo-grid connection function, normal power generation is possible even during power outages without the PV power conditioner entering autonomous operation. ● Constructability Designed in a compact size that allows outdoor installation without the need for a separate enclosure, equipped with a stainless steel casing and IP54 equivalent waterproof and dustproof properties. ● Expandability Up to four units can be connected in parallel within the same system, with a maximum output of 120kVA (30kVA output for each of the four during autonomous operation) / 294.8kWh.

• Other Batteries
• Power and Energy Equipment
• Other Smart Grid

A disaster prevention, mitigation, and industrial storage system that ensures power supply during emergencies and supports daily self-consumption. Achieving groundbreaking price, performance, and safety!

The industrial storage system from Connex Systems, the BLP, is designed for outdoor installation and can accommodate both emergency power supply and daily self-consumption. Additionally, its compact design integrates the PCS and battery housing, contributing to space-saving. It is a system suitable for BCP applications that can be reasonably scaled up to meet only the necessary demands during emergencies. 【Features】 - Rated output: 30kW / Storage capacity: approximately 73.7kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - Compact outdoor installation type that does not require housing storage This industrial storage system is characterized by its PV compatibility, allowing the PV power converter to operate independently during power outages without going into self-operation mode, enabling normal power generation. It can handle prolonged power outages in conjunction with solar power generation. Additionally, during normal times, it allows for efficient electricity use through peak cut and peak shift. With a 30kW output, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

• Solar power generation equipment
• Solar power generation
• Power and Energy Equipment

Caught up in daily data entry, approvals, and inquiries, I want to improve but can't find the time to consider it. Such voices from the field are not uncommon. Even though it's clear that systemization is necessary, the reality is that people often get stuck on where to start and which products to choose. Common frustrations include "I spent time requesting materials and demos, but I'm not sure if it fits my company," and "After implementation, the inquiry contacts are scattered among different manufacturers, making it hard to connect quickly when issues arise." This moves us further away from the original goals of efficiency and reducing dependency on individuals. This is where the option of "agent implementation" comes into focus. Agents that handle products from multiple manufacturers have the advantage of providing unbiased comparisons and neutral proposals without favoring specific products. Even within the same category of systems, they can present the pros and cons side by side for a balanced evaluation. There is also a common misconception regarding pricing; in most cases, there is little to no price difference between direct sales from manufacturers and agents. You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/33869

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Kort Valuta Inc. is pleased to announce that FiNC Technologies Co., Ltd. has adopted TwooCa, our next-generation corporate wallet solution. The implementation was initiated as part of discussions for a potential business alliance. FiNC is currently utilizing TwooCa’s internal campaign feature to enhance employee communication and increase awareness and engagement with the platform across the organization. ■ Key Initiatives Internal employee campaigns powered by TwooCa Enhanced communication among employees Increased awareness and adoption of TwooCa within the company Promotion of employee benefits digital transformation (DX) TwooCa is a corporate wallet platform that brings together health, employee benefits, and digital payments into a single solution, helping organizations address workplace challenges while creating new value for both employers and employees. Kort Valuta will continue working with organizations and partners to deliver innovative solutions that combine health, employee benefits, and digital payments, driving the next generation of employee benefits DX. Click here for the press release https://prtimes.jp/main/html/rd/p/000000128.000076589.html

Recently, products that imitate the design and mechanism of our company's products have been circulating in the market. These imitation products have no relation to our company and significantly differ in terms of quality and safety standards. The Magiline Pool is an innovative pool manufactured by Piscines Magiline in France, which has obtained 90 international patents. Our company is the official general importer in Japan. Since our establishment in 1994, we have a track record of over 50,000 installations in 35 countries worldwide, and our quality is recognized by the French origin guarantee label. We cannot provide repairs or after-sales service for imitation products purchased through unauthorized channels. To ensure that our customers can use the Magiline Pool safely and for a long time, we kindly ask that you purchase it from our company or from authorized dealers nationwide. If you have any questions, please feel free to contact us at the address below. • Contact: pool@prosper-d.co.jp We appreciate your continued support of the Magiline Pool.

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at Idemitsu Plant Tech Chiba Co., Ltd. ~ In the case of Idemitsu Plant Tech Chiba ~ Before the introduction, there was a challenge to reduce the time spent on circulating and storing paper documents, as well as the approval process (including rejections). The decision to implement "Rakuraku Seisan" was made considering its proven track record in group companies and the cost benefits it offers. With the system in place, manual errors in data entry and accounting software have clearly decreased. The payment process for invoices used to take a total of 7 hours per month, but it can now be completed in just 4 hours. [Case Overview] ■ Challenges before implementation - Reduce the time spent on circulating and storing paper documents, as well as the approval process (including rejections). ■ Key points of implementation - Peace of mind due to proven track record in group companies. *For more details, please refer to the related links or feel free to contact us.