Our energy storage system was featured in the Electronics Device Industry Newspaper (May 13, 2021 issue).

[Power Outage Measures] For those who have a new coronavirus vaccine refrigerator, unexpected long-term power outage measures can be addressed with a medical emergency small storage battery!

**Power Outage Measures** ▲ Emergency power supply and backup power for ultra-low temperature freezers that store COVID-19 vaccines, etc. ▲ Provides power to ultra-low temperature freezers for 10 hours without interruption during a power outage (based on a power consumption of 300W). ▲ High output of 1500W! Capable of handling inrush current. - Cases of vaccine disposal due to power outages are occurring frequently. Due to insufficient power capacity, freezers for vaccine storage may fall into power shortages, or unexpected power outages may cause freezers to stop, leading to the inability to maintain the appropriate storage temperature, resulting in frequent cases of vaccine disposal. CONNEXX SYSTEMS' emergency small storage battery is originally designed for emergency power supply in facilities that freeze cells and specimens, developed to handle inductive loads. It can provide power to ultra-low temperature freezers and refrigerated storage for approximately 10 hours without interruption. (Based on a power consumption of 300W). It is a portable model with large casters, making it possible to bring it to vaccination sites. It can continue to be used as a backup power source for important equipment even after the COVID-19 pandemic is over.

• Disaster prevention supplies

A large-capacity, compact industrial energy storage system <BLP> that corresponds to the operation of the energy storage system defined in the resilience ZEB demonstration project.

A large-capacity, compact industrial storage system that corresponds to the operation of the storage system defined in the resilience ZEB demonstration project. ■ It is expected that the introduction costs can be reduced with subsidies limited to public facilities. A project to promote the introduction of autonomous and decentralized energy facilities, etc., that simultaneously realizes regional resilience and decarbonization for evacuation facilities and others. Support for the introduction of renewable energy generation and storage systems to public facilities (evacuation facilities, disaster prevention bases, etc.) positioned as evacuation facilities during disasters. If introduced through a system that incurs no initial costs, priority selection is given, with subsidy rates of one-third for prefectures, ordinance-designated cities, and specified cities, one-half for municipalities' solar power generation and cogeneration systems, and two-thirds for remote islands. (Source: Ministry of the Environment website) ■ Features and Strengths ● Compatibility with PV Thanks to the pseudo-grid connection function, normal power generation is possible even during power outages without the PV power conditioner entering autonomous operation. ● Constructability Designed in a compact size that allows outdoor installation without the need for a separate enclosure, equipped with a stainless steel casing and IP54 equivalent waterproof and dustproof properties. ● Expandability Up to four units can be connected in parallel within the same system, with a maximum output of 120kVA (30kVA output for each of the four during autonomous operation) / 294.8kWh.

• Other Batteries
• Power and Energy Equipment
• Other Smart Grid

A disaster prevention, mitigation, and industrial storage system that ensures power supply during emergencies and supports daily self-consumption. Achieving groundbreaking price, performance, and safety!

The industrial storage system from Connex Systems, the BLP, is designed for outdoor installation and can accommodate both emergency power supply and daily self-consumption. Additionally, its compact design integrates the PCS and battery housing, contributing to space-saving. It is a system suitable for BCP applications that can be reasonably scaled up to meet only the necessary demands during emergencies. 【Features】 - Rated output: 30kW / Storage capacity: approximately 73.7kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - Compact outdoor installation type that does not require housing storage This industrial storage system is characterized by its PV compatibility, allowing the PV power converter to operate independently during power outages without going into self-operation mode, enabling normal power generation. It can handle prolonged power outages in conjunction with solar power generation. Additionally, during normal times, it allows for efficient electricity use through peak cut and peak shift. With a 30kW output, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

• Solar power generation equipment
• Solar power generation
• Power and Energy Equipment

■ FaceMe Security "Visitor Access Management" Key Features and Characteristics < Set Access Periods for Each Visitor > - Individual settings for the dates and times visitors can enter - Optimal access periods can be set according to the visitor's situation, whether for short visits or long stays. < Two Types of Authentication Methods to Accommodate Various Scenarios > ▶ Authentication via IP Camera - Enables authentication from a distance, achieving facial recognition without the need to disembark. ▶ Authentication via Facial Recognition Device (e.g., tablet) - Ideal for entry scenarios such as reception or security posts. Can be flexibly utilized depending on the installation location and operation. - Allows for on-the-spot registration of facial information using the device, enabling smooth responses to sudden visits or unexpected guests. < Real-Time Notifications Supporting Security and Reception Operations > - Real-time notifications of visitor and employee classifications, authorization expiration, and authentication status. - Prevents delays and oversights in verification, balancing the reduction of security staff workload with enhanced security. These features resolve issues arising from visual checks, logbooks, and IC card operations, simultaneously achieving enhanced security and improved efficiency in reception and security operations.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

A system for driver terminals has been realized through API integration, promoting the optimization of the delivery process and improvement of services to customers. Seino Information Service Co., Ltd. and Briskola Co., Ltd. announce that they have adopted Briskola's full lifecycle API management product "BAMs Series" for the construction of a system utilizing APIs and the management of API connections with various business applications for driver terminals, aimed at improving delivery efficiency and achieving digitalization of logistics for Seino Transportation Co., Ltd. and transportation groups nationwide. By implementing Briskola's "BAMs Series" for API management in the delivery management system constructed through API integration, we will focus on responding to the expected increase in the number of API calls due to the anticipated increase in terminal numbers, as well as ensuring stable system operation and preventive detection. This will lead to improved operational efficiency for drivers and the provision of high-quality services to customers sending and receiving packages.

In this case study, we have received cooperation from Obayashi Corporation and Sankyu Inc., leaders at the forefront of the construction and logistics industries, to introduce their specific initiatives regarding "early detection of heatstroke risk" and "ensuring worker safety." Additionally, we have published an interview article with Obayashi Corporation, who contributed to the development of "GenVital LTE," as a "development story." As heatstroke risk has become a social issue, we encourage everyone in companies working on improving on-site productivity and safety measures for workers to read this for insights. GRIFFY will continue to contribute to creating safer and more comfortable working environments through DX solutions, including "GenVital LTE." ◾️ Obayashi Corporation (case study) ◾️ Sankyu Inc. (case study) ◾️ Obayashi Corporation (development story) *Please check the link for more details on the article.

We conducted an RTK accuracy verification of the GNSS reference station (Hi-Target Vnet6plus receiver + choke ring antenna) installed at our company building. Generally, with a single-frequency GNSS, once the baseline length exceeds 10 km, it becomes impossible to consider the path through the ionosphere as the same, and the difference in ionospheric delay becomes a significant source of error. By using dual-frequency GNSS, it is possible to correct the delay based on the differences in delay caused by the frequency of the radio waves; however, it is still said to be effective only up to about 10 km. Why is that? We have published the verification results on our blog.